Thermal Analysis of the System Na3AlF6–NaVO3

Summary. The phase diagram of the system Na₃AlF₆–NaVO₃ was determined by means of thermal analysis. The system is a simple binary eutectic one. The eutectic point was estimated at x(NaVO₃) = 0.975 and t _eut = 617°C. The XRD patterns of samples after thermal analysis revealed the presence of cryolite and NaVO₃ only supporting the above assumption of a simple eutectic binary system.     

A simple and regioselective α-bromination of alkyl aromatic compounds by two-phase electrolysis

Electrochemical bromination of toluene and substituted toluenes by two-phase electrolysis yields the corresponding α-brominated products. The reaction has been carried out in a single compartment cell with platinum electrodes at 0 °C in chloroform using an aqueous sodium bromide solution (60%) containing a catalytic amount of HBr. Two-phase electrolysis results in high yields (60-95%) of monobromo compounds with very high regioselectivity (>95%).     

A mild and efficient method for the oxidation of benzylic alcohols by two-phase electrolysis

Electrochemical oxidation of benzylic and substituted benzylic alcohols by two-phase electrolysis yields the corresponding aldehydes as products. The reaction was carried out in a single compartment cell with platinum electrodes at room temperature in chloroform using an aqueous sodium bromide solution (25%) containing a catalytic amount of HBr. The two-phase electrolysis resulted in high yields (74-96%) of benzaldehyde from primary alcohols and secondary alcohols were oxidized to the corresponding ketone but only in low yields under these conditions.     

煤沥青的电化学加氢：Ⅱ.精制沥青的电化学加氢

在隔离式是电解中，用泡沫铅作用阴极，铂作阳极，饱和甘汞电极做参考电极，对太原钢铁公司焦化厂煤沥青经溶剂萃取后所得的精制沥青进行了电化学加氢的研究，考察了电解体系工艺条件对加氢效果的影响。     

Electrolysis in calorimetry

The procedure used by many electrochemists in calculating enthalpy in calorimetric measurements of electrolysis reactions is compared to a purely thermodynamic approach, using the data published by Fleischmannet al. [J. Electroanal. Chem., 287 (1990) 293.] as a case study.The set of excess values dH _ex/dt=dH _obs/dt -dH_calo/dt obtained with the former procedure was neither correlated to any of the experimental parameters nor to the set of values found using thermodynamics. The latter, smaller by factors of up to two orders of magnitude, are shown to follow an expression of the form dH _ex/dt=–kI exp (–E _a/RT) with an activation enthalpy of about 85 kJ·mol^–1. It is suggested that recombination of electrolysis gases may account for this.

---

Zusammenfassung Das von vielen Elektrochemikern verwendete Verfahren zur Berechnung der Enthalpie in kalorimetrischen Messungen an Elektrolysereaktionen wurde unter Anwendung der von Fleischmann et.al. in einer Fallstudie [J. Electroanal. Chem., 287 (1990) 293.] veröffentlichten Angaben mit einer rein thermodynamischen Näherung verglichen.Eine Reihe von mit der ersten Methode erhaltenen überschu\werten dH _ex/dt=dH _obs/dt-dH _calc/dt korrelierte weder mit den experimentellen Parametern noch mit den entsprechenden, thermodynamisch gefundenen Werten. Letztere, um etwa zwei Grö\enordnungen kleinere Werte konnten durch die Gleichung dH _ex/dt= -kI exp (-E _a/RT) mit einer Aktivierungsenthalpie von etwa 85 kJ·mol^–1 beschrieben werden. Es wird deshalb nahegelegt, da\ dies einer Rekombinierung der Elektrolysegase zugeschrieben werden kann.

     

固体氧化物电解池直接电解CO2的研究进展

固体氧化物电解池是一种高效、环境友好型的能量转换器件,可以直接将电能转化为化学能. 本文介绍了近年来作者课题组在固体氧化物电解池直接用于CO₂还原的研究进展,并以阴极材料为主着重讨论了金属陶瓷电极和混合导电型钙钛矿氧化物电极的研究工作,最后展望了未来固体氧化物电解池直接电解CO₂的研究思路和方向.     

Selection of Anodic Material Used in Electrolytic Process for Producing Hypophosphorous Acid

Black lead, Ti-Ru and Ti-PbO2 were used as anode and stainless steel was used as cathode The electrolytic process of producing hypophosphorous acid with four-compartment electrodialytic cell was studied. The comparison of some factors, such as anodic voltage, product concentration and current efficiency, of black lead, Ti-Ru, and Ti-PbO2 electrodes was conducted. As a result, theTi-PbO2 electrode is the optimal anode material used, it can be in electrolytic process for producing hypophosphorous acid.     

Reduced matrix effects for anionic compounds with paired ion electrospray ionization mass spectrometry

It is well-known that matrix effects in high performance liquid chromatography coupled to electrospray ionization mass spectrometry (HPLC-ESI-MS) can seriously compromise quantitative analysis and affect method reproducibility. Paired ion electrospray ionization (PIESI) mass spectrometry is an approach for analyzing ultra-low levels of anions in the positive ion mode. This approach uses a structurally optimized ion pairing reagent to post-column associate with the anionic analyte, subsequently forming positively charged complexes. These newly formed complex ions are often more surface-active as compared to either the native anion or the ion pairing reagent. No studies have examined whether or not the PIESI approach mitigates matrix effects. Consequently, a controlled study was done using five analytes in highly controlled and reproducible synthetic groundwater and urine matrices. In addition, two different mass spectrometers (linear ion trap and triple quadrupole) were used. Compared to the negative ion mode, the PIESI-MS approach was less susceptible to matrix effects when performed on two different MS platforms. Using PIESI-MS, less dilution of the sample is needed to eliminate ionization suppression which, in turn, permits lower limits of detection and quantitation.     

Hydrophobic Vitamin B12. X. Steric Effect in Electrochemical Carbon-Skeleton Rearrangement Catalyzed by Hydrophobic Vitamin B12 in Nonaqueous Media

Abstract

A steric effect in the carbon-skeleton rearrangement catalyzed by heptamethyl cobyrinate perchlorate, [Cob(II)7C₁ester]C10₄, was investigated under electrochemical conditions. The controlled-potential electrolyses of alkyl halides having two carboxylic ester groups of different bulkiness on the same carbon atom, such as 2,2-bis(ethoxycarbonyl)-l-bromopropane, l-bromo-2-tert-butoxycarbonyl-2-ethoxy-carbonylpropane, l-bromo-2-cyclohexyloxycarbonyl-2-ethoxycarbonylpropane, and l-bromo-2-ethoxy-carbonyl-2-phenoxycarbonylpropane, were carried out in N,N-dimethylformamide, as catalyzed by [Cob(II)7C₁ester]CIO₄, to give the corresponding ester-migrated products in the dark at—1.5 V vs SCE in the presence of acetic acid and at—2.0 V vs SCE without acetic acid. As regards a correlation between bulkiness of an ester group and a migration aptitude, a smaller ester group tends to migrate to the adjacent carbon atom more readily than a larger one. The origin of such a steric effect is discussed with attention to the rate-determining step.