Utility of copper(II) oxide as a packed reactor in flow injection assembly for rapid analysis of some angiotensin converting enzyme inhibitors

A new simple, sensitive, rapid and precise flow injection (FI) procedure based on the formation of copper complexes with some angiotensin converting enzyme (ACE) inhibitors has been developed and evaluated for the analysis of lisinopril (LN), enalapril maleate (EP), ramipril (RP) and perindopril tert-butylamine (PD). In this method, samples were injected into a flowing stream of distilled-deionized water, carried through the packed reactor of CuO for derivatization followed by ultraviolet (UV) detection. The flow rate was 1.5 ml min⁻¹ and column temperature was ambient (25 °C). Lisinopril was injected directly into the flowing stream and the detector response was measured at 262 nm. The hydrolysis products of enalapril maleate, ramipril and perindopril tert-butylamine in 0.2N NaOH were injected after neutralization with 1N HCl and the detector response was measured at 272, 265 and 252 nm, respectively. The developed method was successfully applied to the determination of tested drugs in pharmaceutical preparations at a sampling rate of 60 samples h⁻¹ and a recovery near 100% for all compounds.     

毛细管电色谱中双电层叠加的研究

通过流动相中电解质浓度对毛细管电色谱柱效能的流动相平均线速度的影响，研究了ＣＥＣ中双电层叠加现象。提出选择合适电解质组成的浓度及在制备色谱柱过程中避免细小和破碎的固定相颗粒进入柱中，以有效地减小双电层叠加作用。     

Selectivity changes towards steroids in packed column supercritical fluid chromatography (SFC) induced by temperature and pressure variation

Summary Pressure/temperature variation in SFC was shown to influence selectivity towards steroids. Major changes were observed for polar column packings compared to non-polar packings and variation of the amount of modifier showed that this is valid over the whole investigated range. The effect is underlined by a fall in resolution in the low density range (low pressure/high temperature) for polar stationary phases and appears to be significantly larger than for non-polar phases. Major selectivity shifts induced by variation of the physical properties of the mobile phase are considered to be due to the greater effect of polar modifiers on the nature of polar stationary phases than on non-polar phases.     

Supercritical fluid chromatography of petroleum products using flameless sulfur chemiluminescence detection

Supercritical fluid chromatography using flameless sulfur chemiluminescence detection has been investigated for the analysis of sulfur compounds in petroleum products. The chromatography and detection system was easy to implement and exhibited good precision, linearity, selectivity, and sensitivity. A minimum detectable limit of 0.3 pg sulfur/s was obtained, and response to sulfur in different sulfur species was nearly equimolar.     

甘脲用作气相色谱固定相的色谱性能研究

甘脲具有双环双脲结构,既是质子给体,又是质子受体,能与溶质产生氢键作用等多种作用力。本文制备了以甘脲作为固定相的填充柱,并对它的色谱性能进行了研究。结果表明:甘脲固定相热稳定性高、柱性能稳定,是一种良好的气相色谱固定相。该固定相对烷烃、卤代烃、芳烃、醇、酯、酮、酸、胺等类物质具有良好的分离能力,尤其是对位置异构体(如二取代苯位置异构体)有较好的分离选择性。本文还初步探讨了甘脲固定相的分离机理。     

Centrifugally-driven sample extraction, preconcentration and purification in microfluidic compact discs

Centrifugally-driven microfluidic compact discs (μ-CDs) have attracted significant interest within the analytical science community in the past decade, with the primary focus on the potential of such platforms for performing parallel and/or multiplex biological assays and further application in biomedical diagnostics. More recently, μ-CD-based devices were also applied to environmental analysis as platforms for multi-sample extraction and transportation, prior to off-disc analysis in the laboratory. This review critically summarizes recent developments in μ-CD platforms for sample extraction, preconcentration, fractionation and purification in bioanalytical and environmental applications. We also summarize the common methods employed in the fabrication of μ-CD platforms. Further, we discuss preparation of stationary phases in microfluidic channels embedded in μ-CDs, as applications of μ-CDs in sample extraction are generally based on enclosed series of extraction phases and microcolumns.     

Strategies for Enhancing Laccase Yield from <Emphasis Type="Italic">Streptomyces psammoticus</Emphasis> and Its Role in Mediator-based Decolorization of Azo Dyes

Enhanced production of laccases from Streptomyces psammoticus in solid-state fermentation was carried out using two different strategies: laccase inducers and scale-up process. Laccase yield was enhanced by a wide range of aromatic inducers. The best inducer was pyrogallol, which yielded 116 U/g as compared to the control (55.4 U/g). Scale-up studies in packed bed bioreactor was performed at different aeration rates. Aeration at 1.5 vvm was identified as the optimum condition for laccase production (75.4 U/g) in the column bioreactor. The enzyme yield was enhanced further by combining the best conditions from the first two experiments. Fermentation was carried out in bioreactors in the presence of 1 mM pyrogallol, which resulted in 3.9-fold increase in laccase yield (215.6 U/g). The role of laccase in azo dye decolorization was evaluated in the presence of four different laccase mediators, at different concentrations. 1-Hydroxybenzotriazole (HOBT) proved to be the best mediator for S. psammoticus laccase and decolorized the azo dyes efficiently. Acid orange, Methyl orange, and Bismarck brown were decolorized at the rates of 86%, 71%, and 75% respectively, by HOBT.     

Toward rapid preparation of capillary columns for electrochromatography use

CEC is a high performance electrodriving liquid phase separation technique. It does not need complex and sophisticated high pressure instrumentation for nanoflow driving. This is attractive for parallel multicolumn analysis. To this end, high throughput methods for column preparation are needed to support the use of multiple columns. In this study, we directly used CEC mobile phase solution as the packing solvent, and realized rapid preparation of capillary columns based on a single particle fritting technology. The method presented high preparation throughput compared with other reported methods based on various fritting technologies. The single particle fritting approach promoted column preparation throughput to 1 column/h, including all the fritting, packing and conditioning steps. The rapidly prepared columns showed consistently high efficiency of up to 150 000 plates per meter, and usefulness in reversed phase CEC of neutral, charged and biomolecules. With standard peptides as the sample, excellent long term reproducibility (better than 0.8%RSD, ten days, for retention times) was observed.     

Towards high peak capacity separations in normal pressure nanoflow liquid chromatography using meter long packed capillary columns

Single shot proteomics is a promising approach to high throughput proteomics analysis. In this strategy, long capillary columns are needed to perform long and shallow gradients to achieve high peak capacity and good peak width for informative mass spectrometric detection. Herein, we report that meter long capillary columns, packed with 5 μm particulate material, can be facilely fabricated based on single particle fritting technology. The long columns could reliably generate high peak capacities of 800 in 10 h long gradients for protein digest separations. The operation was within the pressure range (40 MPa) of the most widely used normal pressure nanoLC systems. Due to the excellent life time (>100 injections) and inter-column performance consistency, the meter long capillary columns reported here should be of practical usefulness in single shot proteomics without the need for ultra-high pressure instrumentation.