LOM and HOM damping study in a superconducting deflecting cavity for ALS at LBNL

Superconducting deflecting cavities can be used in synchrotron light source to generate subpicosecond X-ray pulses while the impedance of the lower order modes (LOM) and higher order modes (HOM) in the cavity should be kept below an accepted level to avoid beam instability. These modes can be damped by adding waveguide on beam pipe. Detailed simulation of Q in CST Microwave Studio is introduced and experiment results on an aluminum model cavity with damping waveguide are reported to make a comparison.     

校园网络数据资源分层访问策略

分析了校园ＭＩＳ及数据资源的特征,针对校园信息资源范围广、关联复杂的状况,提出了数据资源统一访问策略——分层访问．数据访问分为七层,各层完成数据访问独立性的特定功能,使不同的访问软件能透明访问全部数据资源．为保证传统应用能基于网络计算访问统一数据资源,又提出了“数据访问管道”和数据库访问服务器的技术．文章分析了以应用服务器为基础的Ｎ－Ｔｉｅｒｓ计算的弊端,设计了“虚拟应用服务器”ＷＵＶ－ＡＰＰＳ,将数据访问对象构造成数据对象组件．     

高橡胶含量透明MBS合成及其对PVC的改性

高橡胶含量透明ＭＢＳ合成及其对ＰＶＣ的改性高南，肖贵斌，胡伟军（上海大学化学系上海嘉定２０１８００）关键词　ＭＢＳ树脂，ＰＶＣ树脂，乳液聚合，塑料增韧，透射电镜ＭＢＳ（甲基丙烯酸甲酚－丁二烯－苯乙烯）树脂具有复杂的多相结构，可用作硬质聚氯乙烯（ＰＶＣ...     

Simulation of spray combustion in a lean-direct injection combustor

Large-eddy simulation (LES) of a liquid-fueled lean-direct injection (LDI) combustor is carried out by resolving the entire inlet flow path through the swirl vanes and the combustor. A localized dynamic subgrid closure is combined with a subgrid mixing and combustion model so that no adjustable parameters are required for both non-reacting and reacting LES. Time-averaged velocity predictions compare well with the measured data. The unsteady flow features that play a major role in spray dispersion, fuel–air mixing and flame stabilization are identified from the simulation data. It is shown that the vortex breakdown bubble (VBB) is smaller with more intense reverse flow when there is heat release. The swirling shear layer plays a major role in spray dispersion and the VBB provides an efficient flameholding mechanism to stabilize the flame.     

航空导管弯曲试验的疲劳裂纹萌生寿命

飞行器液压导管受接头和卡箍等约束,在使用的振动环境中,会因弯曲应力而导致破裂,影响到飞行安全.本文对飞行器液压系统通用的不锈钢导管的裂纹萌生寿命进行了试验研究.首先在对8 mm、12 mm无缺陷导管和含U型缺口8 mm导管的疲劳试验和有限元分析的基础上,得到了导管的最大拉应变-裂纹萌生寿命数据.然后采用基于强度极限和弹性模量估算法的Manson-Coffin公式来预测导管裂纹萌生寿命.最后引入加载类型修正系数、表面质量修正系数、试样尺寸修正系数、应力集中敏感系数和有效应力集中系数,使修正后的公式对三种类型的导管均有较好的裂纹萌生寿命预测精度.     

Poly(vinyl chloride) Nanocomposites

Poly(vinyl chloride) is one of the major thermoplastics beside other commodities polymers like polyethylene and polystyrene. However, some of its main characteristics such as plasticity, thermal and photo stability are inferior to other commodity polymers. Adding nano scale inorganic fillers to poly(vinyl chloride) or other polymers in view to obtain polymer nanocomposites with superior properties has drawn the attention of many researchers in the last decades. Poly(vinyl chloride) nanocomposites are obtained mainly by in situ polymerization, solution based or mixing techniques. The resulting products show improvement of most important properties of poly(vinyl chloride) such as thermal, mechanical, rheological, flammability, antibacterial, etc. This paper presents preparation ways of poly(vinyl chloride) nanocomposites using different nano fillers and the improved properties compared with those of virgin poly(vinyl chloride).     

圆管入口段不可压缩层流流动的解析分析

从不可压缩粘性流体的Navier-Stokes方程出发,给出了在均匀来流条件下的圆管入口段层流流动中央区的速度分布及压力分布的解析解．     

椭圆截面曲线管道内二次流动的Galerkin解

推导了任意空间曲线直角坐标系内的张量流体力学方程．采用Galerkin方法和计算机符号运算技术求解了椭圆截面螺旋管道（电括弯管、扭管）内的二次流动．计算结果表明了Galerkin方法的适用和有效性，克服了振动法的小参数局限．对所得结果的分析揭示了椭圆截面螺旋管道内流动的特性，给出了k,r和Re较大情况的研究结论．     

Thermal degradation studies in poly(vinyl chloride)/poly(methyl methacrylate) blends

The miscibility, morphology, and thermal properties of poly(vinyl chloride) (PVC) blends with different concentrations of poly(methyl methacylate) (PMMA) have been studied. The interaction between the phases was studied by FTIR and by measuring the glass transition temperature (T_g) of the blends using differential scanning calorimetry. Distribution of the phases at different compositions was studied through scanning electron microscopy. The FTIR and SEM results show little interaction and gross phase separation. The thermogravimetric studies on these blends were carried out under inert atmosphere from ambient to 800 °C at different heating rates varying from 2.5 to 20 °C/min. The thermal decomposition temperatures of the first and second stage of degradation in PVC in the presence of PMMA were higher than the pure. The stabilization effect on PVC was found most significant with 10 wt% PMMA content in the PVC matrix. These results agree with the isothermal degradation studies using dehydrochlorination and UV-vis spectroscopic results carried out on these blends. Using multiple heating rate kinetics the activation energies of the degradation process in PVC and its blends have been reported.     

Erbium(Ⅲ) PVC membrane sensor based on N-(benzyloxycarbonyloxy)succinimide as a new neutral ionophore

In this study,a new Er³⁺ sensor based on N-（benzyloxycarbonyloxy）succinimide（BCS） as a neutral carrier has been constructed. The sensor exhibits potential linear response with a Nernstian slope of 20.5±0.4 mV/decade in the concentration range of 1.0×10^-6to 1.0×10^-2mol/L of Er³⁺.It has a very short response time（<10 s）,detection limit of 6.3×10^-7 mol/L and a good selectivity relative to a wide variety of other metal ions including common alkali,alkaline earth,heavy,and transition metal ions.It can be used in the pH range of 2.5-10.6 without any considerable divergence in potentials.The proposed sensor was successfully applied for the recovery of Er³⁺ ions spiked in tap and river water samples.