不同管径聚乙烯管的旋转挤出

通过口模旋转挤出制备3种管径聚乙烯(PE)管,系统研究其结构与性能。结果表明,相较于传统挤出PE管内串晶平行与轴向,旋转挤出过程中聚合物熔体的流动是轴向牵引流动和环向拖曳流动的叠加,其方向偏离轴向,可诱导串晶偏离轴向排列,从而提高PE管的环向取向度,实现PE管的环向增强,抑制裂纹在PE管内沿轴向扩展。随PE管管径的增加,在相同旋转角速度下环向流动线速度增大,串晶偏离轴向的夹角增加,环向取向度更高,因而旋转挤出制备的大口径PE管具有更优的性能。     

PP-g-(St-co-MMA)/PP/PVC共混物相容性研究

利用扫描电子显微镜(SEM)和X射线能谱仪(EDS)对聚丙烯／聚氯乙烯(PP80／PVC20)二元体系,以及聚丙烯多单体接枝物[PP-g-(St-co-MMA)]／PP／PVC三元体系的相容性进行了研究。由X射线能谱微区分析得到了共混物中氯元素面分布图。对氯元素面分布进行了粒径分布统计和面积计算。实验结果表明：在PP80／PVC20共混物100份中加入6份PP-g-(St-co-MMA)增容剂时,增容效果最好;进一步增加PP-g-(St-co-MMA)含量时,PP／PVC的相容性反而降低。差示扫描量热仪(DSC)的实验结果也佐证了SEM和EDS的实验结果。     

Quantitative Analysis of Holmium Ion by a Ho3+ Ion‐Selective Sensor Based on a Symmetric Thio‐Schiff's Base

A poly(vinyl chloride) (PVC) membrane sensor for holmium ions was fabricated based on N‐[(Z)‐1‐(2‐thienyl)‐ methylidene]‐N‐[4‐(4‐{[(Z)‐1‐(2‐thienyl)methylidene]amino} phenoxy)phenyl] amine (TPA) as a new ion carrier, acetophenon (AP) as plasticizing solvent mediator and sodium tetraphenyl borate (NaTPB) as an anion excluder. The electrode shows a good selectivity towards Ho³⁺ ions respect to other inorganic cations, including alkali, alkaline earth, transition and heavy metal ions. The constructed sensor displays a Nernstian behavior (19.5±0.3 mV/decade) over the concentration range of 1.0×10⁻⁶ to 1.0×10⁻² mol·L⁻¹ with the detection limit of the electrode being 4.6×10⁻⁷ mol·L⁻¹ and very short response time (ca. 5 s). It has a useful working pH range of 3.2–9.8 for at least 8 weeks. The electrode was successfully applied as an indicator electrode for the potentiometric titration of a Ho³⁺ solution with EDTA and holmium determination in some alloys. The proposed sensor accuracy was studied by the determination of Ho³⁺ in mixtures of three different ions.     

溶剂对聚氯乙烯-聚乙二醇-KOH体系脱氯行为的影响

废旧塑料的回收利用是当今研究的热点之一.据报道,2007年中国聚氯乙烯(PVC)产量高达960万吨[1],如何合理利用相应产生的废旧PVC是一个十分重要的课题.     

厚壁管道周向导波检测技术实验研究

厚壁管道是火电机组四大管道系统的核心部件,将超声导波技术应用于厚壁管道的无损检测显得十分重要.首先确定厚壁管道检测的激励方式,优化选取适合厚壁管道检测的0.5MHz探头和楔形块角度为60°的斜探头组合.通过改变斜探头与外壁轴向缺陷之间周向距离,在一定范围内仍可检测到缺陷回波,且接收到的周向回波幅值变化不大,表明周向导波...     

高性能计算机用热管复合制冷系统设计研究

根据高性能计算机全天候温控的需要,提出了综合应用蒸气压缩和动力型分离式热管制冷技术的复合冷源方案。在冬季及春、秋过渡的低温季节,运行热管循环不仅大幅降低环控装置的能耗,而且可以避免在低温环境运行压缩式制冷易发生的冷启动、回油润滑等问题。提出了蒸气压缩制冷、蒸气压缩/热管复合制冷和热管制冷的分区工作模式,引入复合制冷模式有效拓宽了热管运行温区,大幅提高了制冷系统的综合COP。模拟分析了在北京地区应用热管复合制冷技术的节能性能,相比常规的压缩制冷节能率高达40%。研究表明:热管复合制冷系统具有显著的节能减排优势,特别适用于全天候工作的机房、基站等高热密度电子集成系统的温控。     

用于高热流密度器件冷却的热管散热器实验研究

针对大型计算机服务器CPU的耗能量,探讨了一种新的热管排布方式的散热器,并对其散热性能进行了实验研究.研究结果表明,采用此种热管散热器,最高热流密度为74.3W/cm2,其冷却风速控制在4m/s即可满足芯片冷却要求.同时根据模拟计算得到的散热器底板温度分布,可有助于对热管排布方式的优化设计.     

高炉冲渣水余热回收的可行性研究

根据高炉冲渣水的余热特点,提出了一个采用分离式热管换热器的余热回收的方案。文中对余热回收方案中换热设备的结构特点进行了描述。     

Waterhammer modelling of viscoelastic pipes with a time-dependent Poisson's ratio

Poisson's ratio in viscoelastic materials is a function of time. However, recently developed waterhammer models of viscoelastic pipes consider it constant. This simplifying assumption avoids cumbersome calculations of double convolution integrals which appear if Poisson's ratio is time-dependent. The present research develops a mathematical model taking the time dependency of Poisson's ratio into account for linear viscoelastic pipes. Poisson's ratio is written in terms of relaxation function and bulk modulus which is assumed to be constant. The relaxation function is obtained from creep function given as the viscoelastic property data of pipe material. The results obtained from the present waterhammer model are compared with the experimental data for two different flow rates. The comparison reveals that with the application of the time-dependent Poisson's ratio and unsteady friction, the viscoelastic data of mechanical tests can directly be used for waterhammer analysis with less need for the calibration of the flow configuration. It was also shown that the creep curve calibrated based on the present model is closer to the actual creep curve than that calibrated based on previous models.     

LOM and HOM damping study in a superconducting deflecting cavity for ALS at LBNL

Superconducting deflecting cavities can be used in synchrotron light source to generate subpicosecond X-ray pulses while the impedance of the lower order modes (LOM) and higher order modes (HOM) in the cavity should be kept below an accepted level to avoid beam instability. These modes can be damped by adding waveguide on beam pipe. Detailed simulation of Q in CST Microwave Studio is introduced and experiment results on an aluminum model cavity with damping waveguide are reported to make a comparison.