旋转输液管动力稳定性理论分析北大核心CSCD

基于Lagrange原理和假设模态法建立了旋转输液管的动力学模型.通过降阶升维的方法求解系统的特征值问题,并分析了旋转输液管自由振动特性.得到了不同端部集中质量和转速下,系统特征值随流速升高的演变轨迹.揭示了临界流速随系统参数的变化规律.研究发现,内部流体的流动对旋转输液管动力学特性存在显著影响.在某些参数组合下,系统低阶模态能够形成不同形式的内共振关系.预示了旋转输液管模型蕴含丰富的动力学现象.     

Electron beam crosslinking of non-lead PVC formulations

PVC samples with lead-free and lead-base stabilizer, containing TMPTMA (trimethylolpropane trimethacrylate) as a crosslinker and DOP (2-ethylhexyl phthalate) as a plasticizer, were electron beam treated at different doses (2–200 kGy) and characterized to evaluate crosslinking and other several properties, as a continuation of our previously reported paper, where these PVC formulations, typical for wire and cable applications, underwent gamma irradiation. The PVC was formulated with two different stabilizing systems: Ca/Zn and dibasic lead phthalate for comparison, to use them as jackets for a 22 wire gage (AWG). Small samples of the jacketed wires were irradiated in an industrial Dynamitron electron accelerator for the corresponding doses, along with two dosimetric systems: radiochromic thin film and alanine pellets dosimeters. The maximum dose applied was decided as the crosslinking increased, until the gel content was stable. The dose of 200 kGy was the condition for the highest crosslinking, so most of the wire was irradiated at such dose. Chemical and mechanical evaluations were carried out to the irradiated wire. The results show that 200 kGy was too high dose for the materials, since an important degradation is observed for the Ca/Zn systems. Unfortunately, such dose affects basically to CaZn formulations, which showed much poorer performance than classical lead-containing compositions. The results also indicate that gel content is not the best way of deciding the optimum condition for irradiation.     

Amperometry of Heparin Polyion Using a Rotating Disk Electrode Coated with a Plasticized PVC Membrane

Electrochemical method of detection of heparin polyion was developed based on voltammetry of heparin on a rotating glassy carbon (GC) electrode coated with a plasticized PVC membrane. The membrane was deposited on the GC disk by spin‐coating technique using a mixture of solutions of PVC in tetrahydrofuran, and 1,1′‐dimethylferrocene (DMFc) and hexadecyltrimethylammonium tetrakis(4‐chlorophenyl)borate (HTMATPBCl) in o‐nitrophenyl octyl ether. UV/vis reflection spectrometry was used to evaluate the membrane thickness, which exhibits a linear correlation with the membrane resistance measured by impedance spectroscopy. It is shown that this electrode can be used for amperometric or coulometric detection of heparin in aqueous samples of medically relevant concentrations (1–10 U mL^?1), with a detection limit of 1.4 U mL^?1. Evidence is provided indicating that the current determining step is the reversible adsorption of the ion‐pair of heparin polyion with HTMA⁺ cation at the membrane/aqueous electrolyte interface, which is driven by oxidation of DMFc at the GC/membrane interface.     

Potentiometric Membrane Sensor for Determination of Saccharin

A potentiometric poly(vinyl chloride) membrane sensor for determination of saccharin is described. It is based on the use of Aliquat 336S-saccharinateion-pair as an electroactive material in plasticized PVC membranes with o-nitrophenyloctylether or dioctylphthalate. The sensor is conditioned for at least two days in 0.1 mol L⁻¹ sodium saccharinate before use. It exhibits fast, stable and Nernstian response for saccharinate ions over the concentration range of 1.0 × 10⁻¹–5.0 × 10⁻⁵ mol L⁻¹ and pH range of 4.5–11. The sensor is used for determination of saccharin in some dosage forms. Results with an average recovery of 101% and a mean standard deviation of 0.2% are obtained which is compared favourably with data obtained using the British pharmacopoeia method. The sensor shows reasonable selectivity towards saccharin in presence of many anions and natural sweeteners.     

All-Solid-State PVC Membrane Ag+-Selective Electrodes Based on Diaza-18-Crown-6 Compounds

Two diaza-crown ether compounds were synthesized and evaluated as Ag⁺-selective carriers in polyvinylchloride (PVC) membrane electrodes of solid-state type. The all-solid-state PVC membrane electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 exhibited a super-Nernstian response (75±10mV per decade) over the concentration range of 1×10^–1 to 7×10^–6M of Ag⁺ ion and a detection limit of 3×10^–6M, at a wide range of pH (pH 4–7). The response time of the electrode was fast (less than 10s), and it can be used for three months without any significant deviation in potential. The proposed all-solid-state PVC membrane electrodes revealed high selectivity toward Ag⁺ ion with respect to alkali, alkaline earth, heavy and transition metal ions. A flow-through cell of all-solid-state PVC membrane Ag⁺-selective electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 has also been prepared and applied for flow-injection analysis of Ag⁺ ion in solution.     

Thermogravimetric analysis of PVC/ELNR blends

The thermal behaviour of a series of solution-cast blends of polyvinyl chloride/epoxidised liquid natural rubber (ELNR) of different mole percentage of epoxidation has been examined using thermogravimetric analysis. Thermal degradation is found to occur through a two-step route in which the first step corresponds to the dehydrochlorination of PVC to form a polyene and the second step is attributed to the decomposition of the ELNR and the polyene. Introduction of 20 and 50 mol% of epoxy group into the liquid NR is found to enhance the thermal stability of PVC. Probable mechanisms of degradation have been suggested on the basis of the kinetic analysis of the degradation studies. It is found that the mechanism is influenced by the epoxy content of the blend system. Activation energy for the degradation and the entropy change have also been reported.     

Lead ion selective PVC membrane electrode based on 5,5'-dithiobis-(2-nitrobenzoic acid)

A PVC membrane electrode for lead ions based on 5,5′-dithiobis-(2-nitrobenzoic acid) as membrane carrier was prepared. The electrode exhibits a Nernstian response for Pb²⁺ over a wide concentration range (1.0×10⁻²–4.0×10⁻⁶ M). It has a relatively fast response time and can be used for at least 3 months without any divergence in potentials. The proposed electrode revealed good selectivities for Pb²⁺ over a wide variety of other metal ions and could be used in a pH range of 2.0–7.0. It was used as an indicator electrode in potentiometric titration of lead ions and in direct determination of lead in water samples.     

A Novel PVC‐Membrane‐Coated Graphite Sensor Based on an Anthraquinone Derivative Membrane for the Determination of Lead

A highly selective membrane electrode for the determination of ultratrace amounts of lead was prepared. The PVC membrane electrode based on 2‐(2‐ethanoloxymethyl)‐1‐hydroxy‐9,10‐anthraquinone (AQ), directly coated on graphite, exhibits a good Nernstian response for Pb(II) ions over a very wide concentration range (1.0×10^?7–1.0×10^?2 M) with a limit of detection of 8.0×10^?8 M. It has a fast response time of ca. 10 s and can be used over a period 2 months with good reproducibility (SD=±0.2 mV). The electrode revealed a very good selectivity respect to common alkali, alkaline earth, transition and heavy metal ions and could be used in the pH range of 3.5–6.8. It was used as an indicator electrode in potentiometric titration of lead ions with chromate and oxalate, and in indirect determination of lead in spring water samples.     

Isothermal Degradation of PVC/MBS Blends

The process of thermal degradation of poly(vinyl chloride)/poly(methyl methacrylate-butadiene-styrene) (PVC/MBS) blends was investigated by means of isothermal thermogravimetry in nitrogen. The total mass loss was determined after 120 min. The kinetic parameters of the degradation process were determined by applying two kinetic models: the model which assumes autocatalytic degradation (Prout-Tompkins) and the model of two-dimensional diffusion. It was established that the thermal degradation at lower degrees of conversion (α<0.20) was well described by the former model, but the latter model was applicable at higher degrees of conversion. The thermal stability of blends at a certain temperature of isothermal degradation depends on the blend composition and the shell/core ratio in MBS, and on the adhesion in the boundary layer in PVC/MBS blends. This revised version was published online in July 2006 with corrections to the Cover Date.     

Potentiometric determination of diclofenac in pharmaceutical formulation by membrane electrode based on ion associate with base dye

The characteristics,performance and application of membrane electrode based on ion associate of diclofenac with base dye Safranine T are described.The electrode response to diclofenac has the sensitivity of 47±1.0 mV decade~(-1)over the range of 5×10~(-5)to 5×10~(-2)mol/L at pH 6-12,and the detection limit of 3.2×10~(-5)mol/L.The electrode is easy assembled at a relatively low cost has fast response time(2-4 s)and can be used for a period up to 3.5 months without any considerable divergence in potential.The proposed sensor displayed good selectivity for diclofenac in the presence of different substances.It was used to determine diclofenac in pharmaceuticals by means of the standard addition method.