Organic phase conversion of bulk (wurtzite) ZnO to nanophase (wurtzite and zinc blende) ZnO

We describe the all-organic phase conversion of bulk commercial ZnO in the wurtzite modification to sub-30 nm ZnO that we find to be partially in the zinc blende [, a=4.568(3) Å] modification. The conversion involves refluxing ZnO in 2,4-pentanedione (acetylacetone) at 413 K to form the zinc 2,4-pentanedionate, which is decomposed by heating at 573 K in an appropriate high-temperature solvent such as dibenzylether to form nanophase ZnO. This nanophase, partially zinc blende ZnO can also be obtained in a single step by heating commercial zinc 2,4-pentanedionate in refluxing dibenzylether. Thermodiffractometry suggests that the conversion of zinc blende ZnO to wurtzite ZnO commences near 650 K.     

Effect of Enzyme Modification of Corn Grits on their Properties as an Adsorbent in a Skarstrom Pressure Swing Cycle Dryer

Corn grits have been tested as a desiccant in a pressure swing adsorption (PSA) system to produce dry air. Two sizes of unmodified corn grits were tested in the PSA system: 2.16 and 0.978 mm in diameter, which dried moist air to dew points of –42°C and –69°C, respectively. A modification technology has been developed for the corn grits that gives an increase in the operational adsorptive capacity in a pressure swing adsorption system, so that they remove as much moisture from air as molecular sieves at the same conditions. After modification, 2.16 mm corn grits dry moist air to a –56°C dew point and the 0.978 mm corn grits dry air to a –80°C dew point. The modification process creates surface modifications on the corn grits apparently making more adsorption sites easily available. The modification procedure increases the specific surface area of the grits and possibly decreases the crystallinity, which would make more hydroxyl groups available for adsorption of water. Possible applications of using corn grits in the pressure swing adsorption system include industrial gas dryers, sorptive cooling air conditioners, and recycling equipment for industrial solvents.     

Linked crystallites in the conducting topmost layer of polymer bilayer films controlled by temperature: from micro- to nanocrystallites.

Temperature has great impact on the structure and size of the linked crystallites of the conducting topmost layer formed at the surface of a polycarbonate film via the reaction BEDT-TTF+IBr [BEDT-TTF=bis(ethylenedithio)tetrathiafulvalene]. We show that fine temperature control permits formation of a semiconducting topmost layer of alpha'-(BEDT-TTF)(2)(I(x)Br(1-x))(3) crystallites with either micro- or nanometre size, a result that opens a route to miniaturized conducting plastic materials.     

新型陶瓷材料的光激励发光性质研究

针对以往电子俘获光存储材料存在的问题，利用高温固相反应发制备了一种Eu^2 掺杂的氟氧化物玻璃陶瓷，研究表明在该材料中具有光激励发光(PSL)特性，并可用于电子俘获光存储。XRD分析表明该材料含有大量的BaF2微晶。根据其与BaF2相似的发光特性，推断玻璃陶瓷的PSL有可能来源于微晶中Eu^2 的5d-4f发射。但是决定光激励发光过程中的电子(空穴)陷阱的存在方式、电子迁移途径都有待进一步探讨的问题。与传统的BaFCl：Eu相比，这种材料的光激励发光衰减速度较慢。     

溶胶-凝胶法合成纳米铬酸锶镧的工艺研究

以硝酸镧、硝酸铬、硝酸锶为原料，乙二醇为分散剂，柠檬酸为胶溶剂，用溶胶-凝胶法合成纳米级的铬酸锶镧粉体。利用TG，DSC，XRD分析研究了粉料的晶化过程。利用HREM分析了煅烧温度、含锶量对粉料粒径的影响。研究表明，获得纳米晶的最佳烧结温度在800℃。随着锶掺杂量的增加，粉料的粒径逐渐变小。     

纳米晶复合Nd2Fe14B/α-Fe合金制备与磁性能的研究

采用熔体快淬及晶化处理工艺制备Nd11Fe71Co8V1.5Cr1B7.5纳米晶合金。经21m·s-1快淬及640℃ 4min晶化处理后,制成的粘结磁体的磁性能最佳,为:Br=0.64T,JHc=903.5kA·m-1,(BH)max=71kJ·m-3。添加Cr元素可提高内禀矫顽力,从而提高最大磁能积。     

Sugar-anionic clay composite materials: intercalation of pentoses in layered double hydroxide

The intercalation of non-ionized guest pentoses (ribose and 2-deoxyribose) into the Mg-Al and Zn-Al layered double hydroxides (LDHs) was carried out at 298 K by the calcination-rehydration reaction using the Mg-Al and Zn-Al oxide precursors calcined at 773 K. The resulting solid products reconstructed the LDH structure with incorporating pentoses, and the maximum amount of ribose intercalated by the Mg-Al oxide precursor was approximately 20 times that by the Zn-Al oxide precursor. The ribose/Mg-Al LDH was observed to have the expanded LDH structure with a broad (003) spacing of 0.85 nm. As the thickness of the LDH hydroxide basal layer is 0.48 nm, the interlayer distance of the ribose/Mg-Al LDH is 0.37 nm. This value corresponds to molecular size of ribose in thickness (0.36 nm), supporting that ribose is horizontally oriented in the interlayer space of LDH. The maximum amount of ribose intercalated by the Mg-Al oxide precursor was approximately 5 times that of 2-deoxyribose. Ribose is substituted only by the hydroxyl group at C-2 position for 2-deoxyribose. Therefore, the number of hydroxyl group of sugar is essentially important for the intercalation of sugar molecule into the LDH, suggesting that the intercalation behavior of sugar for the LDH was greatly influenced by hydrogen bond between hydroxyl group of the intercalated pentose and the LDH hydroxide basal layers.     

Nanocomposite materials from latex and cellulose whiskers

Composite materials were processed by casting a mixture of aqueous suspensions of latex and microfibrils. These microfibrils, or whiskers, are extracted from a sea animal and are monocrystals of cellulose, with an aspect ratio around 100 and an average diameter of 20 nm. It has been found that the mechanical properties (shear modulus) are increased by more than two orders of magnitude in the rubbery state of the polymeric matrix, when the whisker content was 6% (w/w). This very large effect is discussed on the basis of different types of mechanical models and it is concluded that these whiskers form a rigid network, probably linked by hydrogen bonds. The formation of this network is assumed to be governed by a percolation mechanism.     

Headspace solid-phase microextraction-gas chromatography-mass spectrometry applied to quality control in multilayer-packaging manufacture

A method based on headspace solid-phase microextraction-gas chromatography-mass spectrometry is proposed for the quality control of multilayer packaging and its manufacturing process. Volatile organic compounds (VOCs) are produced in the manufacturing process of the packaging. They can cause organoleptic problems or modify the properties of the packaging depending on the nature and the amount of the VOCs formed. The quantification using packaging samples with a known VOC concentration for the calibration is proposed in order to reduce the analysis time, and the method is validated using a statistical test. Finally, the method is applied to the determination of odour-responsible compounds in multilayer packaging samples obtained under different extrusion-coating conditions, i.e. type of extruder, type of polymer and extrusion speed.