Development of plasticised PVC sensing films for the determination of BTEX compounds in aqueous samples

A novel plasticised PVC polymer membrane as a sensing film for the determination of BTEX compounds using ATR-FTIR spectroscopy is demonstrated. A range of 10 plasticised PVC phases have been investigated using toluene and tetrachloroethylene as test analytes. Both analyte enrichment rates and infrared absorbance values were considered when choosing a suitable polymer for sensing. An enhancement in analyte absorbance at the characteristic IR absorption bands was noted as the plasticiser concentration in the film was increased. 2% PVC with 75% diisooctyl azelate was found to show promising results for simultaneous determination of the BTEX compounds. All BTEX analytes can be measured in less than 8 min. A study of a multicomponent sample demonstrated that analyte enrichment times were influenced by the presence of even one additional analyte component in the sample.     

Degradation mechanism of poly(lactic-co-glycolic) acid block copolymer cast films in phosphate buffer solution

We have investigated the degradation of poly(lactic-co-glycolic) acid copolymer with a lactic to glycolic ratio of 50:50. Solvent-cast films were incubated at 37 °C in phosphate buffered saline solution and their degradation was followed using potentiometry, light microscopy, gravimetry, size exclusion chromatography, differential scanning calorimetry and infrared spectroscopy. The degradation process was found to have two main steps. The first step was observed from 0 to 7 days of degradation. During the first few days a soft layer formed at the surface of the film. As degradation time increased this soft surface layer was found to swell and wrinkle. The polymer molecular weight in the bulk was found to decrease as soon as the film was placed in the medium while the polymer present in the surface layer was found to degrade at a much slower rate. The second step of degradation was found to occur after 8 days. At this stage of the degradation process the molecular weight of the polymer in the bulk of the films was so low that the materials became liquid resulting in the detachment of the film from the glass slide. At this stage the mass loss and amount of acid released in the media were found to increase significantly.     

Evaluation of new organosolv dissolving pulps. Part II: Structure and NMMO processability of the pulps

The supermolecular structure of dissolving pulps produced from hardwood by the organosolv processes Acetosolv, Formacell, and Milox was characterized by physical methods (TEM, WAXS, SAXS, NMR) and compared with conventional Sulfite and standard commercial dissolving pulps. The suitability of the pulps for the NMMO technology was tested by spinning fibres and blowing films, whose structural and mechanical properties have also been determined. With TEM it was shown that the TCF-bleached organosolv pulps have only the primary (Formacell), the primary and S1 (Milox), or mainly the S1 (Acetosolv) layers exposed to the surface, whereas Sulfite pulping exposes the S2 cell wall layer. Especially for Milox and Acetosolv Eucalyptus wood pulps, a reduced degree of crystallinity was found, both with WAXS and NMR. The SAXS results indicate a lower pore intersection length for the new pulps as compared to conventional pulps. Unbleached organosolv pulps show a lower crystallinity, very low pore intersection lengths, and an average crystallite shape different from their bleached counterparts. The dissolution behaviour in NMMO and the processability of the bleached organosolv pulps was satisfactory so far. Fibres and films could be produced with structural and mechanical properties comparable with conventional Sulfite and standard commercial dissolving pulp products. However, unbleached organosolv pulps did not meet the requirements of the NMMO process.     

Studying surfaces and thin films using Mössbauer spectroscopy

Using a series of bi-layer samples, we show how Conversion Electron Mössbauer Spectroscopy (CEMS) and X-ray Backscatter Mössbauer Spectroscopy (XBS) can be done with the same experimental set up. The penetration depths of the K and L conversion electrons are measured as 51(6) and 330(240) nm, respectively, with relative contributions of 88(9) and 12(9)%. The penetration depth of the Fe-K _α X-ray signal is determined to be 3.6(2) μm. As a demonstration we show data on surface damage effects in electropolished TRIP steels, and by comparing CEMS and XBS Mössbauer patterns we estimate the thickness of a damaged layer (created by sanding) to be 550(50) nm.     

Adsorption of a semiflexible wormlike chain

Adsorption of ideal polymers with stiff backbone onto a flat surface is considered theoretically. Both scaling approach and quantitative theory are developed. We predict a self-similar monomer concentration profile c(x) ∼ x ^-4/3 near the surface (when the distance to the surface x is much smaller than the chain persistence length l /2). The typical conformation of a weakly adsorbed chain can be viewed as a sequence of alternating flat (2-dimensional) trains of wormlike short loops (flat blobs) and coil-like (3-dimensional) loops forming a triple-layer structure: contact layer (x < Δ) of adsorbed fragments virtually laid on the surface, proximal layer (Δ < x < l) of flat blobs, and more dilute distal corona layer (x > l). Here Δ defines the range of monomer/surface attraction, Δ ≪ l. The adsorption transition is continuous. However, its relative width is small (T ^* is the adsorption temperature, ΔT is the relevant temperature interval): ∼ , i.e. a discontinuous transition in the limit Δ/l↦ 0. Received 10 October 2002 and Received in final form 22 November 2002 RID="a" ID="a"Permanent address: Physics Department, Moscow State University, Moscow 119992, Russia. e-mail: semenov@polly.phys.msu.ru     

金纳米空心半球壳膜的可调谐光学性质研究

以单层聚苯乙烯微球阵列为模板,通过控制其表面金膜蒸镀时间,制备了具有不同厚度的空心半球壳结构的金纳米膜.利用扫描电子显微镜和自制光谱仪分别测量了金膜表面形貌和其透射光谱,并分析了金膜形貌与其光学性质间的关系,同时以4-巯基苯胺为探针分子测定了金膜的表面增强喇曼散射效应.结果表明,该金纳米膜的表面等离子体共振波长随膜厚度增大而发生红移,在可见与近红外波段较宽范围内可调谐,并且,当金膜共振波长与入射激发光波长较近时,探针分子可产生出较强的表面增强喇曼信号.同时,对该现象的产生机制也进行了理论解释.     

Polyelectrolytes tethered to a free surface

Several attempts have been already carried out in order to tether charged chains by an end at a free fluctuating surface. We review here most of these attempts and focus on how close the physics of charged brushes can be investigated by such an approach. We first describe results about films of charged-neutral diblock copolymers spread at the surface of water. Results can be mostly rationalized in terms of charged brushes although additional structurations and fluctuations of the interface can be observed. The latter deformations are also observed when adsorbed layers of charged-neutral diblock copolymers are considered. At last, we examine how free suspended films of charged-neutral diblock copolymers can be viewed as two opposing charged brushes, both in terms of thickness and pressure. Received 9 May 2000     

Vibrational Study of Dipotassium Zinc Bis(Dihydrogendiphosphate) Dihydrate,K2ZN(H2P2O7)2·2H2O

Abstract

Infrared and Raman spectra of dipotassium zinc bis(dihydrogendiphosphate) dihydrate, K₂Zn(H₂P₂O₇)₂ .2H₂O have been collected and interpreted using factor group analysis. Noncoincidence of the Raman and infrared spectra bands confirms a centrosymmetric structure for K₂Zn(H₂P₂O₇)₂ .2H₂O previously investigated by X-ray structural study, as well as the joint appearance of ν_as POP and ν_s POP point to a bent POP configuration.     

薄膜沉积过程中TiO_2的金红石相向锐钛矿相转变

用ＲＦ磁控放电方法以纯金属钛做靶材在氩氧混合气体中制备了ＴｉＯ２薄膜,Ｒａｍａｎ光谱测量表明,在２Ｐａ工作气压下制备的ＴｉＯ２薄膜为锐钛矿结构,而在０２Ｐａ工作气压下制备的是金红石结构。工作气压的改变引起了ＴｉＯ２薄膜沉积中的相转变。