Polyvinylpyrrolidone (PVP) assisted single‐step synthesis of kesterite Cu2ZnSnS4 nanoparticles by solvothermal process

Quaternary kesterite‐type Cu₂ZnSnS₄ (CZTS) nanoparticles (NPs) were successfully synthesized by a single‐step solvothermal process. Semiconductor CZTS nanoparticles were obtained from ethylene glycol (EG) and CZTS precursor after solvothermal process at 180 °C for 30 h in polyvinylpyrrolidone (PVP) medium. The synthesized CZTS NPs were further annealed at 450 °C in nitrogen atmosphere and used for further characterizations. The CZTS NPs were characterized using X‐ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM), micro Raman spectroscopy, high resolution transmission electron microscopy (HRTEM) and X‐ray photoelectron spectroscopy (XPS). The optical properties of the CZTS NPs were recorded by UV–vis absorption spectroscopy. The results showed that the synthesized CZTS nanoparticles are kesterite‐type CZTS, with good crystallinity and a stoichiometric composition. Moreover, the prepared nanoparticles have a size ranging from 5–7 nm and a band gap of ～1.5 eV.

     

Effect of silver addition on the formation and deposition of titania nanoparticles produced by liquid flame spray

In this study, liquid flame spray (LFS) was used to produce titania, silver and silver–titania deposits of nanoparticles. Titanium(IV)ethoxide (TEOT) and silver nitrate in ethanol solutions were used as precursors and sprayed into turbulent hydrogen–oxygen flame. Production rates of 1.5–40 mg/min of titania were used with silver additions of 1, 2, 4, and 8 wt% compared to titania. Nanoparticle deposits were collected by thermophoretic sampling at six different axial distances from the flame torch head: 3, 5, 10, 12, 15, and 20 cm, of which the all but the last one occurred inside the flame. The deposit samples were analysed by TEM and SAED analysis. The powder samples of the particles were also collected by electric precipitator to XPS and specific surface area analysis. Particle size and effective density after the flame in the aerosol were analysed with SMPS and ELPI. The results from the previous studies i.e. controlling the particle size by setting the production rates of the particles were seen to apply also for this binary system. Characterisation of the deposits showed that when the substrate is inserted into the flame, in the beginning of the flame the deposit is formed by gas phase deposition whereas further down the flame the particles are first formed in the gas phase and then deposited. The location of the transition from gas phase deposition to gas phase nucleation prior to deposition depends on chemical/physical properties (e.g. thermodynamics and gas phase interactions) of the precursor, precursor concentration in the flame and also flame temperature profile. Therefore, the deposit collection distance from the burner also affected the collected particle size and degree of agglomeration. The two component deposits were produced in two different ways: one-step method mixing both precursors in the same solute, and two-step method spraying each precursor separately. The particle morphology differs between these two cases. In one-step method the primary (d _TEM) and agglomerate particle size (d _SMPS) decreased with the amount of silver addition, verifying the fact that when present, the silver has a clear effect on the titania nanoparticle formation and growth.     

Synthesis and characterization of nanoparticles with an iron oxide magnetic core and a biologically active trialkylsilylated aliphatic alkanolamine shell

Water-soluble double-coated magnetic nanoparticles (NPs) containing cytotoxic decyldimethyl(β$\beta$-dimethylaminoethoxy)silane methiodide (AA) molecule sorbed at biocompatible magnetic particles, which consist of magnetite pre-coated with oleic acid (OA), have been prepared. X-ray line profile broadening analysis was used for crystallite size determination. The method of magnetogranulometry has been used for determination of diameter of iron oxide magnetic core and magnetic properties of NPs prepared. In vitro cytotoxicity on monolayer tumor cell lines HT-1080 (human fibrosarcoma), MG-22A (mouse hepatoma) and normal mouse fibroblasts (NIH 3T3) has been studied. It was revealed that all the water-based colloidal solutions obtained are non-toxic and possess high NO-induction ability.     

Dielectric and electro-optical studies of a nickel-ferrite-nanoparticle- doped ferroelectric liquid crystal mixture

Effect of magnetic nanoparticles (nickel ferrite) doping on the dielectric and electro-optical properties of a ferroelectric liquid crystal mixture has been studied. In a doped ferroelectric liquid crystal mixture, dispersion of a small amount (0.25 wt.%) of nickel ferrite nanoparticles decreases the polarization and improves the response time compared to an undoped mixture. The significant changes in the polarization and response time are explained on the basis of dipole–dipole interaction and anchoring phenomena. Dielectric permittivity also increases with increasing the temperature of the SmC* phase and shows a reduction in dielectric loss in a doped sample. A Goldstone mode is clearly observed at ～200 and ～500 Hz in an undoped and a doped sample, respectively.     

Sonocatalytic removal of naproxen by synthesized zinc oxide nanoparticles on montmorillonite

ZnO/MMT nanocomposite as sonocatalyst was prepared by immobilizing synthesized ZnO on the montmorillonite surface. The characteristics of as-prepared nanocomposite were studied by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM) and X-ray diffraction (XRD) techniques. The synthesized samples were used as a catalyst for sonocatalytic degradation of naproxen. ZnO/MMT catalyst in the presence of ultrasound irradiation was more effective compared to pure ZnO nanoparticles and MMT particles in the sonocatalysis of naproxen. The effect of different operational parameters on the sonocatalytic degradation of naproxen including initial drug concentration, sonocatalyst dosage, solution pH, ultrasonic power and the presence of organic and inorganic scavengers were evaluated. It was found that the presence of the scavengers suppressed the sonocatalytic degradation efficiency. The reusability of the nanocomposite was examined in several consecutive runs, and the degradation efficiency decreased only 2% after 5 repeated runs. The main intermediates of naproxen degradation were determined by gas chromatography–mass spectrometry (GC–Mass).     

An Improved Method for Site‐Specific End Modification of Zeolite L for the Formation of Zeolite L and Gold Nanoparticle Self‐Assembled Structures

The ability to site‐selectively modify micro‐ and nanosized particles has allowed for directed self‐assembly in two and three dimensions. Site‐selective modification of particles can be a complicated task requiring the pre‐organization of particles or enhanced particle fabrication methods. The aluminum silicate, zeolite L has been reported to undergo site‐specific modification at the zeolite channel entrances, post‐fabrication in a solution‐based method. The process by which the channel entrances are site selectively modified is explored here. The preliminary step of charging the zeolite channels with aqueous acid allows for catalysis of covalent bond formation at the channel entrances. Three new end‐specific modification reagents are described based on silanol and silyl ether functional groups. These reagents are purified by column chromatography and characterized by¹H NMR spectroscopy and high resolution mass spectrometry (HRMS); they provide for reliable end modification of zeolites L. Preferential reactivity at the channel entrances is also observed. The utility of the approach is demonstrated by modifying zeolite L with adamantane at the channel entrances. Site‐specific self‐assembly with β‐cyclodextrin coated gold nanoparticles can be triggered with a chemical stimulus. The resulting multivalent host‐guest interactions give gold clustered nanoparticles at the ends of the micrometer‐sized zeolites.     

Synthesis and characterization of LSMO manganite-based biocomposite

In this paper we study the structural, morphological and magnetic properties of La_0.67Sr_0.33MnO₃ (LSMO) manganite nanoparticles (NPs) and its biocomposite, obtained by mixing NPs of hydroxyapatite (HA). From the studies of X-ray diffraction and Fourier transmission of infrared spectroscopy it is evident that in the biocomposite sample both the individual phases are distinguishable from each other. The measurements of direct current (DC) magnetization and hysteresis loops reveal that the basic magnetic behaviour of LSMO–HA is similar to that of LSMO; however, the admixture of HA makes the sample magnetically softer. From the investigation of transmission electron microscopy it is observed that such a biocomposite is composed of the NPs of LSMO surrounded by HA particles, which can be found suitable for biomedical applications.     

Hydrothermal synthesis of manganese oxide and nitrogen doped graphene (NG-MnO2) nanohybrid for visible light degradation of methyl orange dye

MnO₂ nanoparticles and its nanocomposite with nitrogen-doped graphene (NG) have been fabricated via simple hydrothermal synthesis procedure using water as a solvent. X-ray diffraction (XRD) analysis of the as-prepared samples was used to ascertain the phase purity and crystallite size. Field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) were employed to study the surface features and particle size of the synthesised samples. The photocatalytic ability of the methyl orange (MO) dye with bare MnO₂ and its hybrid with nitrogen-doped graphene (NG-MnO₂) wer compared with visible light prompted degradation of the dye in absence of these catalysts. The prepared nanohybrid (NG-MnO₂) showed improved photocatalytic efficacy as compared to the pure MnO₂ nanoparticles. The strong ferromagnetic character of nanohybrid helps in easy separation of catalyst even with a bar magnet.     

Temperature dependent magnetic spin and orbital moments of mass-filtered cobalt clusters on Au(111)

Mass-filtered cobalt clusters with a size of 8 nm have been deposited in-situ under soft-landing conditions onto Au(111). The spin and orbital moments of the Co nanoparticles on a Au (111) single crystal have been investigated as a function of the temperature using the element-specific method of X-ray magnetic circular dichroism in photoabsorption. The results hint at an temperature-dependent spin-reorientation transition which is discussed with respect to different contribution to the magnetic anisotropy. Furthermore, by means of an in-situ oxidation experiment, the influence of an exposure to oxygen on the properties of the cobalt clusters has been investigated.