搅拌釜中制备草酸铈的团聚尺寸模型研究

以硝酸铈和草酸铵反应生成草酸铈沉淀为研究对象，探讨了搅拌釜中输入功率、溶液过饱和度与产物团聚尺寸之间的变化关系并在团聚和破碎动力学的基础上建立了团聚尺寸模型。根据草酸铈沉淀实验中得到的实验结果求得了一定反应体系浓度下的模型K1，K2和K3值，最后通过－↑LtE,max的模型计算值与实验值，ε--↑LtE的模型曲线与实验曲线的比较初步证明了该模型的实际适用性。     

Investigation of Isomerization of 2—Seleno—1,3,2—diazaphospholidine Derivatives

For the first time the isomerization of 1,3,2-diazaphospholidine-2-sclenide dervatives in refluxing benzene in the presence of trace water was observed. The structures of isomerized products were determined by IR, ^1H NMR,^31P NMR, elemental analysis and X-ray crystallography. The mechanism of isomerization was also proposed.     

Synthesen von α,β-ungesättigten 2-(2-Oxo-benzazolin-3-yl)-3-hydroxy-dithio-carbonsäure-alkylestern und entsprechend substituierten Keten-S,S-acetalen sowie deren Kristall- und Molekülstruktur

Summary The new alkyl 2-(2-oxo-benzazoline-3-yl)-3-hydroxy dithiocrotonates and dithiocinnamates4 and the corresponding ketene dithioacetals2 and5 are obtained by dithiocarboxylation of the 3-acceptormethyl substituted benzazoline-2-ones1 or3. Alkylation at room temperature gives compounds4 whereas at higher alkylation temperature2 or5 are formed. The results of X-ray analyses performed for methyl 3-hydroxy-p-chloro-dithiocinnamate4d and of N-[1-(4-chloro-benzoyl)-2,2-bis(methylthio)-vinyl]-benzothiazoline-2-one5e are discussed.

     

1，2－二氢－3H－吲哚－3－酮类化合物的光化学合成

１，２－二氢－３Ｈ－吲哚－３－酮类化合物的光化学合成凌可庆（淮北煤炭师范学院化学系，淮北，２３５０００）关键词吲哚衍生物，单重态氧反应，１，２－二氢－３Ｈ－吲哚－３－酮衍生物，光合成１，２－二氢－３Ｈ－吲哚－３－酮是重要的有机合成中间体，广泛用于多种...     

Fluorinated triazinones from hexafluoroacetone ethoxycarbonylimine

The behavior of hexafluoroacetone ethoxycarbonylimine in cyclocondensation with different binucleophiles of the amidine type, viz., amino derivatives of N- and N,S-heterocycles, was studied. A preparative method for the synthesis of previously unknown annelated 2,2-bis(trifluoromethyl)-1,3,5-triazinones was developed.     

薄层色谱法在香兰素合成中的应用

应用薄层色谱法对愈创木酚、3－甲氧基－4－羟基扁桃酸和香兰素进行了分析，以硅胶GF254作为吸附剂，从几种溶剂系统中选出氯仿：乙酸乙酯：正丙醇：冰乙酸：水＝20：1：1：1：2溶液作为展开剂。建立了 香兰素的薄层扫描定量分析方法，测定波长为500nm，参比波长为570nm，线性范围为0．31－6．2μg。     

Relationship between the molybdenum phases and the conversion of n-butane over Mo/HZSM-5

The conversion of n-C₄H₁₀ was undertaken on MoO₃/HZSM-5 catalyst at 773–973 K and the phases of molybdenum species were detected by XRD. The XRD results show that bulk MoO₃ on HZSM-5 can be readily reduced by n-C₄H₁₀ to MoO₂ at 773 K and MoO₂ can be gradually carburized to molybdenum carbide above 813 K. The molybdenum carbide formed from the carburization of MoO₂ with n-C₄H₁₀ below 893 K is -MoC_1−x with fcc-structure, while hcp-molybdenum carbide formed above 933 K. During the evolution of MoO₃ to MoO₂ (>773 K) or the carburization of MoO₂ to molybdenum carbide (>813 K), deep oxidation, cracking and coke deposition are serious, in particular at higher reaction temperatures, these lead to the poor selectivity to aromatics. Aromatization of n-C₄H₁₀ can proceed catalytically on both Mo₂C/HZSM-5 and MoO₂/HZSM-5, the distribution of the products for the two catalysts is similar below 813 K, but the activity for Mo₂C/HZSM-5 is much higher than that for MoO₂/HZSM-5.     

The regioselectivity of the formation of 2-pyrazolylthiazoles and their precursors from the reaction of 2-hydrazinothiazoles with 4,4,4-trifluoro-1-hetaryl-1,3-butanediones

Reaction of 2-hydrazinothiazoles 1 with 1-thienyl- and 1-furyl-1,3-butanediones 2a,b in methanol in the presence of hydrochloric acid mainly leads to a mixture of pyrazoles 3 and pyrazolines 4 or pyrazoles 3 and 5 in strong acidic conditions. Isomeric hydrazones 6 and pyrazolines 4 were formed and isolated in these reactions in the absence of hydrochloric acid. It has been shown that the regioselectivity in the reaction of diketones 2 with hydrazine 1 is governed by both the concentration of acid and the nature of substituents in the 1,3-diketones 2. Cyclization of hydrazones 6 is shown to occur under milder conditions than dehydration for pyrazolines 4. The new heterocyclic compounds were prepared and fully characterized by NMR spectra and by X-ray analysis for 3c.     

Lanthanum-based perovskites obtained in molten nitrates or nitrites

Lanthanum-based perovskites, LaMO₃ (where M = Mn, Fe, Co, Ni), have been synthesised from lanthanum precursors and corresponding 3d transition metal salts in molten alkali metal nitrates or nitrites. The reactivity of eight precursors in three molten salts of different basicity was analysed. Single phase orthorhombic LaMnO_3.11, and orthorhombic LaFeO₃ have been obtained in molten NaNO₂ at 723 K, for 2 h. LaCoO₃ is also formed in molten nitrite, but an increase of basicity, by adding Na₂O₂, was necessary to obtain LaNiO₃. The reaction systems were investigated by thermal analysis. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and specific surface area measurements (BET method) were used to characterise the synthesised nanopowders.     

K-Ce_(0.5)Zr_(0.5)O_2催化碳颗粒物燃烧性能

用等体积浸渍法制备了不同K负载量的xKNO3-Ce0.5Zr0.5O2系列催化剂,用程序升温氧化反应(TPO)考察催化剂对碳颗粒物(soot)燃烧的催化活性.并采用XRD、BET、FT-IR、XPS等技术对KNO3负载催化剂进行表征.结果表明KNO3负载量对催化剂的比表面、表面化学环境有显著的影响;KNO3能使催化剂对soot的催化燃烧活性有较大提高,且存在最佳负载量,当x=0.5时,催化剂的活性最好,碳颗粒物的起燃温度(T)i和峰顶温度(Tp)分别为290℃和360℃.在反应过程中,KNO3熔融状态的形成和K2CO3的生成,使催化活性明显提高.