Cu(I)-catalyzed (11)C carboxylation of boronic acid esters: a rapid and convenient entry to (11)C-labeled carboxylic acids, esters, and amides

Rapid and direct: the carboxylation of boronic acid esters with (11)CO(2) provides [(11)C]carboxylic acids as a convenient entry into [(11)C]esters and [(11)C]amides. This conversion of boronates is tolerant to diverse functional groups (e.g., halo, nitro, or carbonyl).     

The role of crystalline, mobile amorphous and rigid amorphous fractions in the performance of recycled poly (ethylene terephthalate) (PET)

The action of thermo-mechanical degradation induced by mechanical recycling of poly(ethylene terephthalate) was simulated by successive injection moulding cycles. Degradation reactions provoked chain scissions and a reduction in molar mass mainly driven by the reduction of diethyleneglycol to ethylene glycol units in the flexible domain of the PET backbone, and the formation of -OH terminated species with shorter chain length. The consequent microstructural changes were quantified taking into account a three-fraction model involving crystalline, mobile amorphous (MAF) and rigid amorphous fractions (RAF). A remarkable increase of RAF, to a detriment of MAF was observed, while the percentage of crystalline fraction remained nearly constant. A deeper analysis of the melting behaviour, the segmental dynamics around the glass-rubber relaxation, and the macroscopic mechanical performance, showed the role of each fraction leading to a loss of thermal, viscoelastic and mechanical features, particularly remarkable after the first processing cycle.     

Triphenylamine-based novel PET sensors in selective recognition of dicarboxylic acids

The triphenylamine-based chemosensors 1 and 2 have been designed and synthesized, for the first time, for the selective recognition of dicarboxylic acids. Carboxylic acid binding takes place through charge neutral pyridyl amide receptor sites with concomitant quenching of fluorescence of the triphenylamine moiety. The bindings were examined using ¹H NMR, fluorescence and UV-vis spectroscopic methods. The receptor 1 was found to be selective for glutaric and adipic acids and the macrocycle 2 was specific for 2,2-dimethylmalonic acid.     

Improved syntheses of precursors for PET radioligands [F]XTRA and [F]AZAN

Improved syntheses of 7-methyl-2-exo-[3′-(2-bromopyridin-3-yl)-5′-pyridinyl]-7-azabicyclo[2.2.1]heptanes (3) and 7-methyl-2-exo-[3’-(6-bromopyridin-2-yl)-5′-pyridinyl]-7-azabicyclo[2.2.1]heptanes (4), precursors for PET radioligands [¹⁸F]XTRA (1) and [¹⁸F]AZAN (2), involving a key Stille coupling step followed by deprotection of Boc group and N-methylation are described. The new synthetic procedures provided the title compounds in more than 40% overall yields.     

Mechanism of stress cracking of poly(ethylene terephthalate) beverage bottles: A method for the prevention of stress cracking based on water hardness

A recently described bottle test method was used to evaluate the dependence of stress crack failure of poly(ethylene terephthalate) (PET) carbonated soft drink bottles on water hardness. Although the industry belief is that water hardness is irrelevant to stress cracking, it was found that hardness ions exert a tremendous positive impact by deactivating water alkalinity through precipitation as harmless carbonate minerals. This mitigating effect of hardness means that no complete understanding of stress cracking as a function of alkalinity is possible without also considering water hardness. A useful concept is that of excess alkalinity, which is defined as alkalinity that is not precipitated during solution evaporation. Limiting excess alkalinity by using water with sufficient hardness is an effective means of stress crack prevention in PET soft drink bottles. Evaluation of compositions which are typical of those used for lubricating PET bottles on production conveyors showed that the role of these compositions in stress cracking was that of spectators, that is, they neither cause failure if water does not otherwise cause it, nor stop failure if water otherwise causes it.     

Flame retardancy properties of α-zirconium phosphate based composites

α-Zr phosphate (hereafter referred to as ZrP) based composites were prepared by melt blending in order to improve the flame retardancy properties of polyamide 6 (PA6), polyethylene terephthalate (PET), polypropylene (PP) and ethylene vinyl acetate copolymer (EVA). Different morphologies are distinguishable by electron microscopy: PA6-ZrP seems to be a nanocomposite by Transmission Electron Microscopy (TEM) whereas PET-, PP- and EVA-ZrP blends appear micro-composites by X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) analyses. ZrP acts as flame retardant in PA6 reducing the total heat evolved and consequently the heat release rate during the combustion measured by cone calorimetry. Moreover, ZrP reduces the flammability of PET and EVA acting in synergistic effect with phosphorous based flame retardants. Indeed, it is showed that it is possible to reduce the amount of phosphorous flame retardant adding ZrP to reach UL94 classification V0 for both polymers.     

PET/PEN共混物的相容性与酯交换反应

通过用1H-NMR对聚对苯二甲酸乙二酯(PET)与聚2,6-萘甲酸乙二酯(PEN)、PET/PEN共聚物的共混物酯交换反应的研究,测得了反应速率常数、反应活化能和诱导期.根据酯交换反应程度和不同反应温度下的诱导期探讨了酯交换反应与相容性的关系,认为PET与PEN的相容导致或增强了酯交换反应,即相容性是酯交换的必要条件;同时酯交换的发生又促进了PET与PEN的相容.酯交换和相容是聚酯共混物熔融时相互关联的两个过程.     

聚苯乙烯-b-聚2(5)-乙烯基对(间)苯二甲酸二钠嵌段共聚物的合成及其对PET结晶行为的影响

通过原子转移自由基聚合合成了线形及三臂聚苯乙烯-b-聚2(5)-乙烯基对(间)苯二甲酸二钠嵌段共聚物,通过凝胶渗透色谱、核磁共振和热失重表征证实得到了结构明确、分散度较窄的嵌段共聚物成核剂.采用熔融共混的方法制得聚对苯二甲酸乙二酯(PET)与成核剂共混样品.采用差示扫描量热仪与一维X射线衍射仪研究了PET及添加成核剂后...     

A FOURIER TRANSFORM INFRARED SPECTROSCOPIC STUDY OF THE REACTION BETWEEN POLY (VINYL PYRIDINE)S AND EPOXY COMPOUNDS

Chemical reactions between poly (vinyl pyridine)s and 1, 4-butanediol diglycidyl ether and other epoxy compounds were studied by Fourier transform infrared spectroscopy and other techniques. The epoxy group was found to react with the pyridine side group of poly (4-vinyl pyridine), forming crosslinked networks which contain cyclic amide structures. The reaction was also observed in the interracial region of poly(vinyl pyridine) and γ-glycidoxy propyl trimethoxysilane hydrolyzate (γ-GPS) coatings on PET fiber substrates. Poly(2-vinyi pyridine) does not show the same reaction.     

Synthesis of O-(2-[~(18)F]fluoroethyl)-L-tyrosine and its biological evaluation in B16 melanoma-bearing mice as PET tracer for tumor imaging

O-(2-[18F]fluoroethyl) -L-tyrosine([18F]FET) ,a fluorine-18 labeled analogue of tyrosine,has been syn-thesized and biologically evaluated in tumor-bearing mice. The whole synthesis procedure is com-pleted within 50 min. The radiochemical yield is about 40%(no decay corrected) and radiochemical purity more than 97% after simplified solid phase extraction. [18F]FET shows rapid,high uptake and long retention in the tumor as well as low uptake in the brain. The ratios of tumor-to-muscle(T/M) and tumor-to-blood(T/B) of [18F]FET are similar to those of [18F]FDG,but the ratios of tumor-to-brain(T/Br) are 2-3 times higher than that of [18F]FDG. Autoradiography of [18F]FET demonstrates a remarkable accumulation in melanoma with high contrast. It appears to be a probable competitive candidate for melanoma imaging with PET.