Electrospun recycled PET-based mats: Tuning the properties by addition of cellulose and/or lignin

The aim of this study was to evaluate the influence of cellulose and/or lignin on the properties of mats prepared from dissolution (for 48 h or 72 h, solvent: trifluoroacetic acid) of recycled poly (ethylene terephthalate) (PET). Briefly, the presence of cellulose led to a tendency of higher average fiber diameter and average pore area as well as lower average porosity compared to the neat mat (PET_ref, 242 ± 59 nm, 9.6 ± 1.1 10⁴ nm² and 19.0 ± 1.1%, respectively). The T_g values for electrospun PET combined with cellulose and/or lignin were higher than that of PET_ref (92.5 ± 0.1 °C), and the tensile strength increased with the cellulose and/or lignin loading. In addition, the presence of lignin (72 h of dissolution) led to a mat with an elongation at break of 149 ± 9% compared to 14 ± 2% for PET_ref. The results indicated that the properties of mats based on PET can be tuned by adding cellulose and/or lignin to solutions posteriorly electrospun as well as by varying the dissolution time.     

Determination of Young's modulus of epoxy coated polyethylene micro-cantilever using phase-shift shadow moiré method

Young′s moduli of various epoxy coated polyethylene terephthalate (PET) micro-cantilevers were determined from the deflection results obtained using the phase-shift shadow moiré (PSSM) method. The filler materials for epoxy coatings were aluminum and graphite powders that were mixed with epoxy at various percentages. Young′s moduli were calculated from theory based on the deflection results. The PET micro-cantilever coated with aluminum-epoxy coating showed increasing value of Young′s modulus when the ratios of the aluminum-epoxy were increased. The graphite-epoxy coating on the PET micro-cantilever also showed the same trend. The experimental results also show that Young′s modulus of the graphite-epoxy coating is higher than aluminum-epoxy coating in comparison at the same mixing ratio.     

Estimating Precision in Functional Images

Abstract

Functional imaging of biologic parameters like in vivo tissue metabolism is made possible by Positron Emission Tomography (PET). Many techniques have been suggested for extracting such images from dynamic time-course sequences of reconstructed PET scans. Quantitating the precision of these estimates is important for drawing inferences on the biologic parameters. Analytic variance formulas are not immediate owing to the nonlinear methods used in extraction. The usual resampling approach is infeasible because each image reconstruction in PET is a computationally demanding solution to a high-dimensional linear inverse problem. We suggest an alternative simulation approach that approximates the distribution of reconstructed PET scans and performs a parametric bootstrap in the imaging domain. Results on a simplified model chosen to match the characteristics of PET reconstruction are very encouraging. Mixture analysis is used to estimate functional images; however, the suggested approach is general enough to extend to other techniques or imaging methods.     

Ferroptosis Detection: From Approaches to Applications

Understanding the intricate molecular machinery that governs ferroptosis and leveraging this accumulating knowledge could facilitate disease prevention, diagnosis, treatment, and prognosis. Emerging approaches for the in situ detection of the major regulators and biological events across cellular, tissue, and in living subjects provide a multiscale perspective for studying ferroptosis. Furthermore, advanced applications that integrate ferroptosis detection and the latest technologies hold tremendous promise in ferroptosis research. In this review, we first briefly summarize the mechanisms and key regulators underlying ferroptosis. Ferroptosis detection approaches are then presented to delineate their design, mechanisms of action, and applications. Special interest is placed on advanced ferroptosis applications that integrate multifunctional platforms. Finally, we discuss the prospects and challenges of ferroptosis detection approaches and applications, with the aim of providing a roadmap for the theranostic development of a broad range of ferroptosis-related diseases.     

Behaviors of flow mechanisms and heat transfer of non-Newtonian fluids through a spinneret

This investigation examines non-Newtonian flow mechanisms and heat transfer characteristics for a micro spinneret. The working fluid, Polyethylene terephthalate (PET), is the raw material of micro fiber, and a large-scale experimental test model was designed to visualize the complex viscous flow system in the micro spinneret. To visualize the complex convective flow system, an experimental test model was constructed, using glycerin instead of PET. The related parameters of PET were compared with those of glycerin. The power law correlates the shear strain with PET viscosity at various temperatures. The pressure distribution along the flow direction was measured and the flow pattern was visualized using polyethylene (PE) powder of 20–40 m. Similar configurations were calculated for micro spinneret physical parameters to determine the thermal flow characteristics. The Reynolds number in the test model is not less than 10^–2. In the non-Newtonian PET working fluid of practical micro spinneret, flows with Re = 10⁴ to 10^–2 are in the same low Reynolds number flow regime. Therefore, the working fluid is expected to have the same flow characteristic. A numerical solution covering the range of approximately Re = 10^–4 at PET confirms that the flow characteristics of glycerin are constant for Re = 1.228 × 10^–2. The Peclet number in the test model can be adjusted to a value similar to that in the micro spinneret. The flow visualization was compared with that of the numerical solution, and the friction factor and Nusselt number in the micro spinneret were analyzed. Finally, numerical results and friction factor with various exit angles of micro spinneret in a triangular zone flow system were also summarized.     

Influence of liquid crystalline polymer and recycled PET as minor blending components on rheological behavior,morphology, and thermal properties of thermoplastic blends

In this study, the potential of recycled poly(ethylene terepthalate) (rPET) as a well‐defined reinforcing material for the in situ microfibrillar‐reinforced composite (iMFC) was investigated in comparison with that of liquid crystalline polymer (LCP). Each dispersed phase (LCP or rPET) was melt blended with high density polyethylene (PE) by using extrusion process. The rheological behavior, morphology, and the thermal stability of LCP/PE and rPET/PE blends containing various dispersed phase contents were investigated. All blends and LCP exhibited shear thinning behavior, whereas Newtonian fluid behavior was observed for rPET. The incorporation of LCP or rPET into PE significantly improved the processability. A potential of rPET as a processing lubricant by bringing down the melt viscosity of the blend system was as good as LCP. The elongated LCP domains were clearly observed in as‐extruded strand. Although the viscosity ratio of the rPET/PE system was lower than that of the LCP/PE blend system, most rPET domains appeared as small droplets. An addition of LCP and rPET into the PE matrix improved the thermal resistance significantly in air but not in nitrogen. The obtained results suggested the high potential of rPET as a processing aid and good thermally resistant material similar to LCP. Copyright © 2009 John Wiley & Sons, Ltd.     

Gas barrier properties of titanium oxynitride films deposited on polyethylene terephthalate substrates by reactive magnetron sputtering

Titanium oxynitride (TiN_xO_y) films were deposited on polyethylene terephthalate (PET) substrates by means of a reactive radio frequency (RF) magnetron sputtering system in which the power density and substrate bias were the varied parameters. Experimental results show that the deposited TiN_xO_y films exhibited an amorphous or a columnar structure with fine crystalline dependent on power density. The deposition rate increases significantly in conjunction as the power density increases from 2 W/cm² to 7 W/cm². The maximum deposition rate occurs, as the substrate bias is −40 V at a certain power densities chosen in this study. The film's roughness slightly decreases with increasing substrate bias. The TiN_xO_y films deposited at power densities above 4 W/cm² show a steady Ti:N:O ratio of about 1:1:0.8. The water vapor and oxygen transmission rates of the TiN_xO_y films reach values as low as 0.98 g/m²-day-atm and 0.60 cm³/m²-day-atm which are about 6 and 47 times lower than those of the uncoated PET substrate, respectively. These transmission rates are comparable to those of DLC, carbon-based and Al₂O₃ barrier films. Therefore, TiN_xO_y films are potential candidates to be used as a gas permeation barrier for PET substrate.     

光诱导电子转移反应在有机合成中的应用

对近十年来报道的在有机合成中有重要意义的光诱导电子转移反应做了简要的总结. 包括六个部分: (1)光诱导电子转移(PET)反应的基本原理, (2) PET诱导的自由基离子裂解和去保护基反应, (3) PET诱导的加成和环加成反应, (4) PET诱导的环化反应和串联环化反应, (5)不对称PET反应, (6)微反应器中的PET反应.     

Solvent‐induced crystallization in poly(ethylene terephthalate) during mass transport

Solvent transport in poly(ethylene terephthalate) (PET) and related phase transformation were investigated. The data of mass sorption were analyzed according to Harmon's model for Case I (Fickian), Case II (swelling), and anomalous transport. This transport process in PET is accompanied by the induced crystallization of the original amorphous state. The transformation was examined by wide‐angle X‐ray scattering, small‐angle X‐ray scattering, differential scanning calorimetry, and Fourier transform infrared spectroscopy. During this process, the matrix is under a strain state that causes different kinetic paths of crystallization as compared with that by thermal annealing. This state of strain assists the development of the solvent‐induced crystallization. The model regarding crystallization was proposed in terms of the study of long period L, the crystal thickness l_c, and the thickness of amorphous layer l_a obtained from the one‐dimensional correlation function and interface distribution function. Different kinetic paths were discovered for different crystallization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1444–1453, 2002     

Experimental constants, characterizing the process of a plasma polymer modification

In the following paper, empirical constants are determined by a plasma-chemical model and experimental data of the wetting contact angle. The constants characterize the alteration of the contact angle as a function of the time of the polymer treatment and the kind of the plasma-creating gas. The presented equations of the model connect the contact angle with the empirical constants for arbitrary time intervals of treatment and arbitrary percentage content of the researched gas mixtures and gasses. The chemical rate constants, which describe the process of the plasma modification of the polymer material, are determined.