Ionic liquid foam floatation coupled with ionic liquid dispersive liquid–liquid microextraction for the separation and determination of estrogens in water samples by high‐performance liquid chromatography with fluorescence detection

An ionic liquid foam floatation coupled with ionic liquid dispersive liquid–liquid microextraction method was proposed for the extraction and concentration of 17‐α‐estradiol, 17‐β‐estradiol‐benzoate, and quinestrol in environmental water samples by high‐performance liquid chromatography with fluorescence detection. 1‐Hexyl‐3‐methylimidazolium tetrafluoroborate was applied as foaming agent in the foam flotation process and dispersive solvent in microextraction. The introduction of the ion‐pairing and salting‐out agent NH₄PF₆ was beneficial to the improvement of recoveries for the hydrophobic ionic liquid phase and analytes. Parameters of the proposed method including concentration of 1‐hexyl‐3‐methylimidazolium tetrafluoroborate, flow rate of carrier gas, floatation time, types and concentration of ionic liquids, salt concentration in samples, extraction time, and centrifugation time were evaluated. The recoveries were between 98 and 105% with relative standard deviations lower than 7% for lake water and well water samples. The isolation of the target compounds from the water was found to be efficient, and the enrichment factors ranged from 4445 to 4632. This developing method is free of volatile organic solvents compared with regular extraction. Based on the unique properties of ionic liquids, the application of foam floatation, and dispersive liquid–liquid microextraction was widened.     

Building Blocks for the Construction of Bioorthogonally Reactive Peptides via Solid-Phase Peptide Synthesis

The need for post-synthetic modifications and reactive prosthetic groups has long been a limiting factor in the synthesis and study of peptidic and peptidomimetic imaging agents. In this regard, the application of biologically and chemically orthogonal reactions to the design and development of novel radiotracers has the potential to have far-reaching implications in both the laboratory and the clinic. Herein, we report the synthesis and development of a series of modular and versatile building blocks for inverse electron-demand Diels–Alder copper-free click chemistry: tetrazine-functionalized artificial amino acids. Following the development of a novel peptide coupling protocol for peptide synthesis in the presence of tetrazines, we successfully demonstrated its effectiveness and applicability. This versatile methodology has the potential to have a transformational impact, opening the door for the rapid, facile, and modular synthesis of bioorthogonally reactive peptide probes.     

Influence of Reverse Pressure on the Shear Viscosity of Hydrophilic Poly（ethylene terephthalate） Melt

The effect of reverse pressure.on rheological behavior has been studied. The apparatus is a capillary rheometer with counter pressure chamber being held at a high reverse pressure by means of a cock. The results show that with the increase in temperature, the shear viscosity of hydrophilic PET is reduced. It is different that the effect of temperature on shear viscosity is varied under the condition of all shear rates or all pressures, and the effect is more prominent at 50 MPa or at 216 s-1. At the same time, the pressure coefficients decrease with increasing the shear rate and the temperature and tend to reach a constant value nearly at the temperature of 290 °C.     

A highly selective and sensitive perylenebisimide-based fluorescent PET sensor for Al determination in MeCN

A novel ‘turn-on’ fluorescent probe with perylene tetracarboxylic bisimide (PBI) as the fluorophore and di(2-(salicylideneamino))ethylamine (DSEA) as the metal ion receptor was designed. The capability of the prepared probe to detect metal ions was evaluated by the changes in its emission intensity. The probe demonstrated a considerable emission enhancement (ca. 110-fold) in the presence of Al³⁺ in MeCN with high selectivity and sensitivity. Furthermore, the considerably ‘off–on’ fluorescence response concomitantly led to the apparent color change from colorless to brilliant yellow, which could also be identified by naked eye easily under UV lamp.     

Synthesis and non‐isothermal crystallization kinetics of poly(ethylene terephthalate)‐co‐poly(propylene glycol) copolymers

Poly(ethylene terephthalate)‐co‐poly(propylene glycol) (PET‐co‐PPG) copolymers with PPG ratio ranging from 0 to 0.90 mol% were synthesized by the melt copolycondensation. The intrinsic viscosity, structure, non‐isothermal crystallization behavior, nucleation and spherulitic growth of the copolymers were investigated by Ubbelohde viscometer, Proton Nuclear Magnetic Resonance (¹H‐NMR), differential scanning calorimetry, and polarized optical microscopy, respectively. The non‐isothermal crystallization process of the copolymers was analyzed by Avrami, Ozawa, Mo's, Kissinger, and Dobreva methods, respectively. The results showed that the crystallizability of PET was apparently enhanced with incorporating a small amount of PPG, which first rose and then reduced with increasing amount of PPG in the copolymers at a given cooling rate. The crystallization mechanism was a three‐dimensional growth with both instantaneous and sporadic nucleation. Particularly, PET‐co‐PPG containing 0.60 mol% PPG exhibited the highest crystallizability among all the copolymers. Copyright © 2015 John Wiley & Sons, Ltd.     

A Versatile Approach for the Site‐Specific Modification of Recombinant Antibodies Using a Combination of Enzyme‐Mediated Bioconjugation and Click Chemistry

A unique two‐step modular system for site‐specific antibody modification and conjugation is reported. The first step of this approach uses enzymatic bioconjugation with the transpeptidase Sortase A for incorporation of strained cyclooctyne functional groups. The second step of this modular approach involves the azide–alkyne cycloaddition click reaction. The versatility of the two‐step approach has been exemplified by the selective incorporation of fluorescent dyes and a positron‐emitting copper‐64 radiotracer for fluorescence and positron‐emission tomography imaging of activated platelets, platelet aggregates, and thrombi, respectively. This flexible and versatile approach could be readily adapted to incorporate a large array of tailor‐made functional groups using reliable click chemistry whilst preserving the activity of the antibody or other sensitive biological macromolecules.     

A steady‐state mass balance model of the polycarbonate–CO2 system reveals a self‐regulating cell growth mechanism in the solid‐state microcellular process

A simple mechanism regulating polymer mobility is demonstrated to determine initial and final growth states of solid‐state microcellular foams. This mechanism, governed by the extent of plasticization of the polymer by the dissolved gases, is examined with a mass balance model and results from foam growth experiments. Polycarbonate was exposed to CO₂, which acted as both a plasticizing gas and a physical blowing agent driving foam growth. The polycarbonate specimens were saturated to the equilibrium gas concentration at 25 °C for CO₂ pressures of 1–6 MPa in 1‐MPa increments. Equilibrated specimens were heated in a glycerin bath until thermal equilibrium was reached, and a steady foam structure was attained. Glycerin bath temperatures of 30–150 °C in 10 °C increments were examined. Using knowledge of gas solubility, the equation of state for CO₂, the effective glass‐transition temperature as a function of gas concentration, and a model for mass balance within a solid‐state foam, we demonstrate that foam growth terminates when sufficient gas is driven from the polycarbonate matrix into the foam cells. The foam cell walls freeze at the elevated bath temperature because of gas transport from the polycarbonate matrix and the associated rise in the polymer glass‐transition temperature to that of the heated bath. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 868–880, 2001     

Plasma-chemical model, describing the surface treatment of polymers in RF-discharge

The surface modification of the polymers has been studied in RF-discharge. A plasma-chemical model is presented, describing the alteration of the adhesion work and the wetting contact angle of the treated materials. It is presumed that the adhesion work can be expressed by its volume and surface components. In the first approximation, only the surface adhesion work is changed in the course of the plasma treatment and it is due to creating of two common functional groups. We suggest a basic system of kinetic equations for quantitatively determining these groups. The system is solved analytically. This gives possibilities to obtain the analytical solutions of the adhesion work and the contact angle as a function of the time of treatment.