Lignin as a Partial Polyol Replacement in Polyurethane Flexible Foam

This study was focused on evaluating the suitability of a wide range of lignins, a natural polymer isolated from different plant sources and chemical extractions, in replacing 20 wt.% of petroleum-based polyol in the formulation of PU flexible foams. The main goal was to investigate the effect of unmodified lignin incorporation on the foam’s structural, mechanical, and thermal properties. The hydroxyl contents of the commercial lignins were measured using phosphorus nuclear magnetic resonance (³¹P NMR) spectroscopy, molar mass distributions with gel permeation chromatography (GPC), and thermal properties with differential scanning calorimetry (DSC) techniques. The results showed that incorporating 20 wt.% lignin increased tensile, compression, tear propagation strengths, thermal stability, and the support factor of the developed PU flexible foams. Additionally, statistical analysis of the results showed that foam properties such as density and compression force deflection were positively correlated with lignin’s total hydroxyl content. Studying correlations between lignin properties and the performance of the developed lignin-based PU foams showed that lignins with low hydroxyl content, high flexibility (low T_g), and high solubility in the co-polyol are better candidates for partially substituting petroleum-based polyols in the formulation of flexible PU foams intended for the automotive applications.     

Ni(OH)2修饰的三聚氰胺泡沫用于可压缩超级电容器电极

通过化学镀和电化学镀的方法制备了一种Ni(OH)₂电化学活性材料修饰三聚氰胺泡沫(MF)可压缩骨架的超级电容器电极材料MF/Ni(OH)₂。MF/Ni(OH)₂可压缩电极材料表现出最佳的电容性能,例如循环稳定性(即使在40 mA/cm^-3的电流密度下经过2000次充放电循环后,可压缩电极仍能保持90.63%的初始电容)和可压缩稳定性(即使在压缩率为50%时,仍具有97.88%的电容保持率)。层状可压缩超级电容器由MF/Ni(OH)₂弹性材料作为阳极,镍/碳(Ni/C)为阴极以及实验室中常用的滤纸作隔膜材料组成。这种超级电容器装置在不同的压缩下表现出良好的电化学性能和优异的压缩稳定性。最后,使用可压缩的超级电容器来点亮LED灯,以展示其在柔性电子设备中的应用。这些优化的电化学和机械性能表明MF/Ni(OH)₂可作为可压缩超级电容器的应用中的候选电极。     

An Organotrifluoroborate for Broadly Applicable One‐Step 18F‐Labeling

A new zwitterionic organotrifluoroborate is appended to three radiosynthons that afford undergo facile bioconjugation to several clinically relevant peptides and one enzyme inhibitor. Molecularly complex bioconjugates are ¹⁸F‐labeled in a single aqueous step in rapid time (<15 min) without HPLC purification to afford tracers in good yields (>200 mCi, 20–40 %) at high specific activity (≥3 Ci/μmol) and at >98 % purity. PET imaging shows in vivo stability and tumor uptake.     

Synthesis of novel hierarchical ZSM-5 monoliths and their application in trichloroethylene removal

A self-supporting ZSM-5 monolith with a hierarchical porosity was prepared using polyurethane foam (PUF) as a structural template and a hydrothermal synthesis procedure. The synthesized monolith was characterized and investigated towards the adsorption and catalytic oxidation of trichloroethylene (TCE). Adsorption of TCE was studied gravimetrically and oxidation of TCE was studied using a vapor-phase down-flow reactor. Monolithic ZSM-5 displayed good sorption properties and completely oxidized TCE. Conversion levels of 50% and 90% were achieved at reduced temperatures (by ~50 ℃) when compared with the conversion temperatures obtained from the powder counterparts. Besides the activity of the monolith towards TCE adsorption and oxidation, it was stable and enhanced diffusion, thereby reducing pressure drops to a great extent owing to its hierarchical porous nature.     

泡沫塑料富集–石墨炉原子吸收光谱法测定贝类水产品中痕量铊

采取微波消解的前处理手段消解样品,经泡沫塑料分离富集后,用石墨炉原子吸收光谱法测定贝类水产品中痕量铊。以1.5 mL Fe3+,2 mL H2O2和5%王水介质作为吸附体系将样品中铊分离富集,再以硝酸钯、抗坏血酸作为基体改进剂进行测定。铊的质量浓度在0～50μg/L范围内线性良好,相关系数为0.999 7,方法的检出限可达0.07μg/g。测定结果的相对别准偏差为1.53%～4.01%(n=7),加标回收率为87.1%～98.3%。泡沫塑料富集–石墨炉子吸收光谱法测定贝类水产品中痕量铊是一种准确、安全、便捷的检测方法。     

Fabrication of flame-retardant and smoke-suppressant isocyanate-based polyimide foam modified by silica aerogel thermal insulation and flame protection layers

Because of containing urea groups, flame resistance and smoke releasing behaviors of isocyanate-based polyimide foam (IBPIF) produced using free foaming technology require further improvement. In this work, silica aerogel layers were incorporated into cells of IBPIF through an in situ growth process of silica sol (SS). Compared with silica aerogel particles directly mixed into the foaming slurry, the silica aerogel layers that firmly attached to the pores and surfaces of cells not only provided exceptional thermal insulation and flame protection, but also kept original cellular structure. With increase in ratio of SS mass to IBPIF volume, silica aerogel incorporation dosage was gradually increased. Accompanied by flame resistance was obviously improved and smoke releasing behavior was effectively suppressed. Those were indicated by the improved limiting oxygen index (LOI), decreased heat release rate (HRR), peak of HRR, and specific optical density of smoke (Ds) in trials with pilot flames. Compared with pure IBPIF, when the ratio reached to 5/15 g/cm³, it resulted in LOI increasing from 22.0% to 33.0%, peak of HRR, total smoke production (TSP), and maximum value of Ds decreasing from 174 to 72 kW/m², 1.11 to 0.37 m²/m², 45.90 to 17.45, respectively.     

Preparation and characterization of heat-resistant PET/bio-based polyester blends for hot-filled bottles

To improve the glass transition temperature (T_g) and heat resistance of polyethylene terephthalate (PET) bottle, poly (ethylene glycol 1,4-cyclohexane dimethylene isosorbide terephthalate) (PEICT) with a unique cyclic structure was introduced into PET. The miscibility of the PET/PEICT blends and their feasibility as a heat resistant bottle were investigated. The introduction of PEICT into PET increases the T_g and the PET/PEICT blends exhibit a single T_g, indicating good miscibility between PEICT and PET. Furthermore, the T_g and crystallinity of the PET/PEICT blends can be adjusted by controlling the amount of PEICT added. The PET/PEICT blends were transparent in the visible light range (no significant change in transparency) because the blends were truly miscible as confirmed by Fox equation. As expected, the introduction of PEICT into PET bottle allows for improved heat resistance and shape stability due to the rigid molecular structure and chirality of the two tetrahydrofuran rings in the isosorbide group of PEICT. Based on our results, the as-prepared PET/PEICT blends with controllable high heat resistance can be used as a cost-effective alternative material for various hot-filling conditions in the beverage industry by adjusting the optimal ratio of PEICT to PET for each product (e.g. fruit juice, tea).     

多尺度Ag/CuO复合光热材料的制备及在海水淡化中的应用

采用原位化学反应和热处理相结合的策略,在泡沫铜表面形成丝线状与花瓣状的立体无机物阵列,然后在其表面蒸镀Ag纳米颗粒(NPs),成功制备了基于泡沫铜的Ag/CuO复合光热材料。该复合材料因表面三维立体阵列结构以及Ag NPs而具备较高的太阳光吸收率。故而,Ag/CuO复合光热材料结合三聚氰胺泡沫组成的蒸发器件实现了高效的海水淡化。本研究除了探索光陷阱深度和金属掺杂对吸收体光热转换效率增强之外,还搭建了太阳能驱动界面蒸汽生成测试系统,测试了样品的光热蒸发性能。在1倍太阳(1 kW·m~(-2))辐照下,该器件整体蒸发速率高达1.097 6 kg·m~(-2)·h~(-1),即其蒸发效率可达78.38%。     

Radiative decay channel assessment to understand the sensing mechanism of a fluorescent turn-on Al3+ chemosensor

The turn-on luminescent chemosensor [2-Hydroxy-1-naphthaldehyde-(2-pyridyl) hydrazone] (L), selective to Al³⁺ ions, was studied by means of density functional theory (DFT) and time-dependent-DFT quantum mechanics calculations. The UV-Vis absorption and the radiative channel from the adiabatic S₁ excited state were assessed in order to elucidate the selective sensing mechanism of L to Al³⁺ ions. We found that twisted intramolecular charge transfer (TICT) and photoelectron transfer (PET), which alter the emissive state, are responsible for the luminescence quenching in L. After coordination with Al³⁺, the TICT is blocked, and PET is no longer possible. So, the emission of the coordination complex is activated, and a fluorescence effect enhanced by chelation is observed. For compounds with Zn²⁺ and Cd²⁺, the luminescence quenching is caused by PET, while for Ni²⁺, ligand to metal charge transfer is the prominent mechanism. To go into more detail, the metal-ligand interaction was analyzed via the Morokuma-Ziegler energy decomposition scheme and the natural orbital of chemical valence.     

Synthesis of [18F]F-γ-T-3, a Redox-Silent γ-Tocotrienol (γ-T-3) Vitamin E Analogue for Image-Based In Vivo Studies of Vitamin E Biodistribution and Dynamics

Vitamin E, a natural antioxidant, is of interest to scientists, health care pundits and faddists; its nutritional and biomedical attributes may be validated, anecdotal or fantasy. Vitamin E is a mixture of tocopherols (TPs) and tocotrienols (T-3s), each class having four substitutional isomers (α-, β-, γ-, δ-). Vitamin E analogues attain only low concentrations in most tissues, necessitating exacting invasive techniques for analytical research. Quantitative positron emission tomography (PET) with an F-18-labeled molecular probe would expedite access to Vitamin E’s biodistributions and pharmacokinetics via non-invasive temporal imaging. (R)-6-(3-[¹⁸F]Fluoropropoxy)-2,7,8-trimethyl-2-(4,8,12-trimethyltrideca-3,7,11-trien-1-yl)-chromane ([¹⁸F]F-γ-T-3) was prepared for this purpose. [¹⁸F]F-γ-T-3 was synthesized from γ-T-3 in two steps: (i) 1,3-di-O-tosylpropane was introduced at C6-O to form TsO-γ-T-3, and (ii) reaction of this tosylate with [¹⁸F]fluoride in DMF/K₂₂₂. Non-radioactive F-γ-T-3 was synthesized by reaction of γ-T-3 with 3-fluoropropyl methanesulfonate. [¹⁸F]F-γ-T-3 biodistribution in a murine tumor model was imaged using a small-animal PET scanner. F-γ-T-3 was prepared in 61% chemical yield. [¹⁸F]F-γ-T-3 was synthesized in acceptable radiochemical yield (RCY 12%) with high radiochemical purity (>99% RCP) in 45 min. Preliminary F-18 PET images in mice showed upper abdominal accumulation with evidence of renal clearance, only low concentrations in the thorax (lung/heart) and head, and rapid clearance from blood. [¹⁸F]F-γ-T-3 shows promise as an F-18 PET tracer for detailed in vivo studies of Vitamin E. The labeling procedure provides acceptable RCY, high RCP and pertinence to all eight Vitamin E analogues.