Competitive demethylation and substitution in N,N,N-trimethylanilinium fluorides

Fluorination of aromatic compounds by nucleophilic displacement of trimethylanilinium salts by fluoride is a commonly used reaction for radiotracer synthesis. Though the liberated trimethylamine is thought to be an excellent leaving group for this type of S_NAr reaction, scattered reports show that amine demethylation (reverse Menschutkin reaction) sometimes dominates over substitution, particularly when relatively electron rich fluoroarenes are the desired targets. Here we provide systematic experimental and theoretical studies of trimethylanilinium demethylation and substitution. Results from these studies highlight the limits of this leaving group in fluoroarene synthesis and have important ramifications for the design of nucleophilic fluorinating agents featuring ammonium cations.     

FRS-XRSA表征双轴取向聚对苯二甲酸乙二酯薄膜的取向分布

Ｘ－射线散射理论分析（ＦＲＳ－ＸＲＳＡ）是作者为了研究和表征取向高聚物结晶度与晶粒取向分布（ＯＤＣ）的一种新方案．在表征ＯＤＣ方面应用分峰法（ＣＰＲ）消除了传统极图法（ＰＦＭ）中高重叠峰相互干扰的困难，克服了取向分布函数分析（ＯＤＦＡ）中出现虚织构的困难，并且经一次系统的ＦＲＳ－ＸＲＳ测定，可以得到几乎所有主要（ｈｋｌ）晶面法向的ＯＤＣ．作者应用ＦＲＳ－ＸＲＳＡ对二类双轴取向ＰＥＴ磁带薄膜进行了ＯＤＣ的研究。基于结晶几何学原理（ＣＧＰ），建立了三斜晶系晶粒坐标系与试样坐标系的关系，并用于推演未测定方位角（αｉ，βｉ）（ｈｋｌ）的晶面散射以及未测（ｈ′ｋ′ｌ′）晶面的ＯＤＣ．作者关系建立了双轴取向函数〈ｃｏｓ２φｈｋｌ，ｉ〉，ｉ＝Ｎ、Ｍ、Ｔ的计算公式．按照ＦＲＳ－ＸＲＳＡ获得了反映取向分布的１０个晶面的双轴极图、三个主晶面（１００）、（０１０）、（１０５）的总极图，以及反映平均取向的各种取向函数，如〈ｃｏｓ２φｈｋｌ，ｉ〉、ｆｃｈｋｌ，ｉ等，结果十分令人满意．     

VISCOELASTIC BEHAVIOR OF THE NON-HOOKE DEFORMATION BEFORE YIELDING IN UNIAXIAL DRAWING OF AMORPHOUS POLY(ETHYLENE TEREPHTHALATE)*

Viscoelastic behavior of the non-Hooke deformation of amorphous PET film before yield was investigated in thetemperature region 74--80.5℃ around the glass transition temperature. The film specimen was drawn to yield point followedby unloading to zero stress, then the residual deformation was held constant, while the subsequent evolution of the stress wasrecorded. An induction period was found in the course of stress evolution fol1owed by a stress step-increase. The inductionperiod decreases with increasing drawing temperature with an activation energy of 1.10 MJ/mol·K, which is attributed tothe time needed for the relaxation of rubbery deformation through cooperative internal rotations. At temperatures lower than74℃, there is no stress increase or the induction period becomes too long to be observed. Thus the nature of anelasticity inthe non-Hooke region before yielding is attributed to stress induced rubbery deformation. The experimental results areinterpreted in terms of Perez' rheological model of a series connected Hooke spring and a Voigt element consisting of aparallel connected elastic spring and a dashpot.     

Broad spectrum and mode of action of an antibiotic produced byScytonema sp. TISTR 8208 in a seaweed-type bioreactor

A photobioreactor was constructed using anchored polyurethane foam strips (1 x 1 x 40 cm) fixed onto a stainless-steel ring to prevent flotation, as a biomass support material (BSM). This type of reactor was named a seaweed-type bioreactor. A filamentous cyanobacterium, Scytonema sp. TISTR 8208, which produces a novel cyclic dodecapeptide antibiotic, was immobilized in seaweed-type photobioreactor and cultivated with air containing 5% CO₂ sparged at a gas flow rate of 250 mL/min under illumination at a light intensity of 200 μmol photon m^-2s^-1. The antibiotic produced in the seaweed-type photobioreactor was purified by HPLC and examined regarding its spectrum and mode of action. The antibiotic effectively inhibited the growth of Gram-positive bacteria, pathogenic yeasts, and filamentous fungi, but it had only a weak effect on Gram-negative bacteria. Scanning electron micrograph analysis showed that the most characteristic change was swelling of the cells after exposure to the antibiotic. The antibiotic seems to alter the conformation of the microbial cell membrane, thereby changing its permeability, leading to osmotic shock.     

Poly(ethylene terephthalate) copolymers containing nitroterephthalic units. III. Methanolytic degradation

The methanolytic degradation of poly(ethylene terephthalate) (PET) copolymers containing nitroterephthalic units was investigated. Random poly(ethylene terephthalate‐co‐nitroterephthalate) copolyesters (PETNT) containing 15 and 30 mol % nitrated units were prepared from ethylene glycol and a mixture of dimethyl terephthalate and dimethyl nitroterephthalate. A detailed study of the influence of the nitro group on the methanolytic degradation rate of the nitrated bis(2‐hydroxyethyl) nitroterephthalate (BHENT) model compound in comparison with the nonnitrated bis(2‐hydroxyethyl) terephthalate (BHET) model compound was carried out. The kinetics of the methanolysis of BHENT and BHET were evaluated with high‐performance liquid chromatography and ¹H NMR spectroscopy. BHENT appeared to be much more reactive than BHET. The methanolytic degradation of PET and PETNT copolyesters at 80 °C was followed by changes in the weight and viscosity, gel permeation chromatography, differential scanning calorimetry, scanning electron microscopy, and ¹H and ¹³C NMR spectroscopy. The copolyesters degraded faster than PET, and the degradation increased with the content of nitrated units and occurred preferentially by cleavage of the ester groups placed at the meta position of the nitro group in the nitrated units. For both PET and PETNT copolyesters, an increase in crystallinity accompanied methanolysis. A surface degradation mechanism entailing solubilization of the fragmented polymer and consequent loss of mass was found to operate in the methanolysis of the copolyesters. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2276–2285, 2002     

多壁碳纳米管-炭复合泡沫材料的制备和吸附性能

通过在聚氨酯泡沫模板中沉积多壁碳纳米管，用炭的预制体酚醛树酯将碳纳米管粘接固定在一起，经过高温碳化过程制备了碳纳米管-炭复合泡沫材料。红外光谱结果表明利用浓硫酸和浓硝酸的混合溶液处理可以使复合泡沫表面活化形成羧基和羟基，从而使复合泡沫具备较强的分子吸附能力。扫描电镜和氮吸附实验表明这种复合泡沫同时具备大孔和介孔，大孔能够满足流体自由流动的通畅性，介孔可以满足中分子的吸附需要。对标定物维生素B12的吸附实验证明这种复合泡沫对中分子量的生化分子具有有效的吸附能力。这种宏观尺寸的泡沫材料与传统的颗粒状活性炭相比具有简化工艺，提高吸附效率的应用潜力。     

Time‐resolved in situ tomography for the analysis of evolving metal‐foam granulates

An experimental setup has been developed that allows for capturing up to 25 tomograms s^?1 using the white X‐ray beam at the experimental station EDDI of BESSY II, Berlin, Germany. The key points are the use of a newly developed, precise and fast rotation stage, a very efficient scintillator and a fast CMOS camera. As a first application, the foaming of aluminium alloy granules at 923 K was investigated in situ. Formation and growth of bubbles in the liquid material were observed and found to be influenced by the limited thermal conductivity in the bulk granules. Changes that took place between two tomographic frames separated in time by 39 ms could be detected and analysed quantitatively.