Synthesis and electrochemical properties of spinel LiMn2O4 prepared by the rheological phase method

Pure-phase and well-crystallized spinel LiMn₂O₄ powders were successfully synthesized by a simple rheological phase method. The thermal behavior and structure properties of the powders prepared by the rheological phase method compared with the solid-state reaction were investigated by thermogravimetry, powder X-ray diffraction , scanning electron microscopy and transmission electron microscopy. According to the results of the electrochemical tests, it is obvious that the sample resulting from the rheological phase method shows higher discharge capacity and better cycling stability than one formed in the solid-state reaction. The cyclic voltammogram and columbic efficiency curves also confirm that the product by the rheological phase method has a good cycling performance due to its fine cubic spinel structure and morphology.     

全自动QuEChERS样品制备系统结合高效液相色谱-串联质谱法检测植物源性食品中34种农药残留

建立了全自动QuEChERS样品制备系统结合高效液相色谱-串联质谱（HPLC-MS/MS）同时检测植物源性食品中34种农药残留的分析方法。方法利用全自动QuEChERS样品制备系统涡旋振动和离心功能，将手动QuEChERS方法中样品提取和分散固相萃取相结合；优化了操作参数及前处理步骤，在多反应监测（MRM）模式下检测，基质匹配外标法定量。从方法学验证角度对全自动QuEChERS法与手动QuEChERS法进行了比较。结果表明：该方法中大多数农药在一定范围内呈现良好的线性关系，相关系数（R²）均大于0.99，检出限为0.76~3.60 μg/kg，定量限为2.28~10.80 μg/kg，加标回收率为53.0%~125.2%，相对标准偏差（RSD）<15.9%（n=5）。该方法与手动QuEChERS法的方法验证比对结果显示差异不明显，用于植物源性食品中多农药残留检测可有效降低劳动强度和出错概率。     

Mechanical properties of BPDA-ODA polyimide fibers

An aromatic polyimide was synthesized via a one-step polycondensation reaction between biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-oxydianiline (ODA) in p-chlorophenol. The polyimide (BPDA-ODA) solution dopes were spun into fibers by means of dry-jet wet spinning. The as-spun fibers were drawn and treated in heating tubes for improving the mechanical properties. The thermal treatment on the fibers resulted in a relatively high tensile strength and modulus. Thermal mechanical analysis (TMA) was employed to study the linear coefficient of thermal expansion (CTE). Thermal gravimetry analysis (TGA) spectra showed that the BPDA-ODA fibers possessed an excellent property of thermo-oxidative degradation resistance. The sonic modulus E_s of the polyimide fibers was measured.     

Catalytic activity of silica in ozone formation in electrical discharges

The catalytic action of granular silica packing on ozone formation has been observed under discharge conditions. Using a glass ozonizer with a metal high-voltage electrode, at a frequency of 400 Hz it was possible to obtain much higher ozone concentrations in the presence q( silica than without packing, with the same total energy consumption. The dependence between ozone production and energy efficiency is considered, and conditions of the optimum ozonizer run are discussed. It is shown that in the all-glass ozonizer with a narrow discharge gap, the ozone concentration may be as high as 6.5% (ca. 130g O₃/m³) when silica packing is applied.     

以万古霉素为流动相添加剂的高效液相色谱法手性分析系统的建立

以丹酰化苯甘氨酸、丹酰化苯丙氨酸、丹酰化丝氨酸、丹酯化丙氨酸为模型化合物，通过对色谱柱类型、缓冲液类型、pH和盐浓度、万古霉素用量、甲醇用量、柱温等色谱参数进行考察，建立了以万古霉素为手性流动相添加剂在普通色谱柱上进行手性分析的色谱系统，并在该系统中成功地拆分了酮洛芬对映体。     

源内裂解液相色谱-质谱鉴别人参皂甙砒和拟人参皂甙F11

研究了利用源内碰撞诱导解离（in-source collision—induced dissociation）的高效液相色谱-大气压化学电离质谱（HPLC—APCI／MS）获取人参和西洋参的化学标志物——人参皂甙Rf和拟人参皂甙F11的特征结构信息及鉴别人参和西洋参的方法。在乙腈-水梯度洗脱反相液相色谱及源内碰撞诱导解离条件下，能获得人参皂甙Rf和拟人参皂甙F11的母核离子及去糖基离子的源内碰撞诱导解离谱，从其差别能清楚区分这对同分异构体。本方法对人参皂甙Rf和拟人参皂甙F11的检出限能达到10^-7g柱上样量，简单、快速，单次质谱实验就能鉴别人参和西洋参。     

分析信号处理方法的比较研究

研究了高效液相色谱－火焰原子吸收光谱联用系统分析信号处理方法，比较了各种处理方法的优缺点，用积分与适应平滑法综合处理色谱峰分析信号，不仅能有效地消除噪声，而且能使分析信号得到加强，以测定镍为例，经积分与适应平滑法综合处理后，检出限改善了２．７倍。     

色谱技术在中药指纹图谱研究中的应用

 介绍了气相色谱、高效液相色谱、超临界流体色谱和高速逆流色谱等几种色谱技术在中药指纹图谱研究中的应用现状,以及使用模糊聚类分析和人工神经网络分析指纹图谱对中药进行模式识别和质量鉴定的方法。     

高效液相色谱法测定糙米粉中的维生素

高效液相色谱法测定糙米粉中的维生素吴红京，唐根源，王勇（中国科学院福建物质结构研究所福州３５０００２）（福建药品检验所福州３５０００１）１前言众所周知，糙米粉有很高的营养价值，含有人体必需的多种维生素。用高效液相色谱法（ＨＰＬＣ）和薄层色谱法（ＴＬＣ...     

Clinical quality vs analytical performance: what are the right targets and target values?

For optimal performance of laboratory tests, testing processes should be designed to provide clinically useful quality and QC procedures should be selected to assure that the necessary clinical quality is achieved in routine production. One important issue is how to define clinical quality. Today’s practice guidelines, quality regulations, and quality standards provide some targets for analytical quality, but they fail to adequately address clinical quality. Target values for precision and accuracy are not the same as clinical quality, though analytical performance certainly contributes to the clinical quality of test results. How can we proceed in our quest to improve quality when there are inconsistencies and inadequacies in the specifications found in practice guidelines, regulations, and standards? Today target values are often being set for the wrong targets. A better approach is possible if we focus on test interpretation guidelines to define clinical quality, then derive specifications for the accuracy and precision that are appropriate for the method, as well the QC rules and numbers of control measurements that are necessary to guarantee the desired quality will be achieved in routine operation of the testing process.