基于DNA-甲苯胺蓝生物聚合离子膜的多环有机物电化学传感器的研究

利用DNA与小分子之间的相互作用,以DNA/壳聚糖生物聚合离子膜固定电活性小分子,制备了DNA-甲苯胺蓝/壳聚糖聚合离子复合膜修饰电极,并利用多环有机物与染料分子对DNA特异结合的竞争关系,构筑了多环有机物非试剂添加型DNA电化学生物传感器。以盐酸四环素为模式分子,利用循环伏安法和方波伏安法研究了该修饰电极的电化学特性以及该电极对盐酸四环素的电化学响应,结果表明,DNA和甲苯胺蓝成功地固定在电极表面,电极表面的甲苯胺蓝保持了很好的电化学活性。利用紫外-可见分光光度法研究了电极对盐酸四环素响应的作用机理。该传感器的线性范围为2.5~100μmol·L-1。     

Fabrication and Performance of a Low Operating Pressure Nanofiltration Poly（vinyl chloride） Hollow Fiber Membrane

A low operating pressure nanofiltration membrane is prepared by interfacial polymerization between m-phenylenediamine(MPDA) and trimesoyl chloride(TMC) using PVC hollow fiber membrane as supporting.A series of PVC nanofiltration membranes with different molecular weight cutoff(MWCO) can be obtained by controlling preparation conditions.Chemical and morphological characterization of the membrane surface was carried out by FTIR-ATR and SEM.MWCO was characterized by filtration experiments.The preparation conditions were investigated in detail.At the optimized conditions(40 min air-dried time,aqueous phase containing 0.5% MPDA,0.05% SDS and 0.6% acid absorbent,oil phase containing 0.3% TMC,and 1 min reaction time),under 0.3 MPa,water flux of the gained nanofiltration membrane reaches 17.8 L/m2·h,and the rejection rates of methyl orange and MgSO4 are more than 90% and 60%,respectively.     

A Biomimetic Nanoparticle to “Lure and Kill” Phospholipase A2

Inhibition of phospholipase A2 (PLA2) has long been considered for treating various diseases associated with an elevated PLA2 activity. However, safe and effective PLA2 inhibitors remain unavailable. Herein, we report a biomimetic nanoparticle design that enables a “lure and kill” mechanism designed for PLA2 inhibition (denoted “L&K-NP”). The L&K-NPs are made of polymeric cores wrapped with modified red blood cell membrane with two inserted key components: melittin and oleyloxyethyl phosphorylcholine (OOPC). Melittin acts as a PLA2 attractant that works together with the membrane lipids to “lure” in-coming PLA2 for attack. Meanwhile, OOPC acts as inhibitor that “kills” PLA2 upon enzymatic attack. Both compounds are integrated into the L&K-NP structure, which voids toxicity associated with free molecules. In the study, L&K-NPs effectively inhibit PLA2-induced hemolysis. In mice administered with a lethal dose of venomous PLA2, L&K-NPs also inhibit hemolysis and confer a significant survival benefit. Furthermore, L&K-NPs show no obvious toxicity in mice. and the design provides a platform technology for a safe and effective anti-PLA2 approach.     

铂合金氧还原催化剂:合成、结构和性能

质子交换膜燃料电池是一种将燃料中的化学能直接转化为电能的装置,它具有转化效率高、能量密度高、低温启动、易于操作等优点,因而被认为是最具发展前景的新能源利用方式,在电动汽车、便携电源及分散式电站有着广泛应用.但是,目前质子交换膜燃料电池技术的发展面临着巨大挑战,主要问题包括高成本、低功率密度和低寿命.众所周知,质子交换膜燃料电池中的阴极氧还原反应在酸性条件下是一个复杂的四电子过程,动力学速度缓慢,限制了电池的最终性能.目前大量使用的阴极氧还原催化剂是细小的铂或铂合金纳米颗粒负载在碳载体上,其成本占燃料电池总成本的比例最大.制约燃料电池商业化发展的另一个重要问题是电池寿命低,其中氧还原催化剂的稳定性是决定电池寿命的主要因素.在这样的研究背景下,如何降低催化剂中铂的用量、提高催化剂活性和稳定性显得尤为重要,这也是近年来国内外学者研究的热点.在铂基合金催化剂中,通常采用过渡金属元素作为掺杂元素,由于原子半径不匹配(几何效应)以及电子结构不同(电子效应),合金催化剂表现出优于纯铂催化剂的催化性能.近几年,对于铂基合金催化剂的研究已取得重大进展,以合金组成和结构研究为基础,通过精确控制原子结构、调控表面电子状态以及制备工艺,获得了各种特殊形貌的催化剂,大大提高了催化活性.本文深入综述了近年来铂基合金氧还原催化剂制备、形貌和性能,特别关注了催化剂形貌和催化活性之间的关系.值得注意的是,具有有序原子排列的铂合金催化剂不仅在半电池中表现出优异活性,在实际质子交换膜燃料电池中也显示了很好的活性和稳定性.另一方面,碳载体的形貌及微观结构也对提高催化活性和稳定性起到决定性作用,通过化学手段加强金属纳米颗粒与碳载体之间的相互作用也是提高催化剂稳定性的重要途径.尽管铂基氧还原催化剂在近几年取得了重要进展,但在实际商业化过程中还存在诸多挑战,本文在综述进展的基础上,对铂基催化剂的发展提出了展望.首先,对于氧还原反应机理仍需要深入研究,采用更加精确的理论模型模拟氧还原动力学过程,以获得影响催化活性的关键因素.其次,提高催化剂在膜电极中的催化活性和利用率.目前,氧还原催化剂在半电池测试中性能优异,但是实际燃料电池操作条件下其性能远不能达到要求,这与膜电极、催化剂层及扩散层结构相关.因此,基于不同铂基催化剂的特性,合理设计膜电极组件的结构是将催化剂进行实际应用的基础.最后,催化剂的稳定性仍需进一步提高,尽管目前大部分催化剂在实验室半电池研究中表现了很好的稳定性,但在实际燃料电池中的稳定性研究还不足,而且对催化剂在膜电极中性能衰退机理的研究也非常有限.因此,对于铂基氧还原催化剂的研发仍需要国内外科研工作者不懈的努力.     

Improving Vesicular Integrity and Antioxidant Activity of Novel Mixed Soy Lecithin-Based Liposomes Containing Squalene and Their Stability against UV Light

In order to improve the membrane lipophilicity and the affinity towards the environment of lipid bilayers, squalene (SQ) could be conjugated to phospholipids in the formation of liposomes. The effect of membrane composition and concentrations on the degradation of liposomes prepared via the extrusion method was investigated. Liposomes were prepared using a mixture of SQ, cholesterol (CH) and Tween80 (TW80). Based on the optimal conditions, liposome batches were prepared in the absence and presence of SQ. Their physicochemical and stability behavior were evaluated as a function of liposome constituent. From the optimization study, the liposomal formulation containing 5% (w/w) mixed soy lecithin (ML), 0.5% (w/w) SQ, 0.3% (w/w) CH and 0.75% (w/w) TW80 had optimal physicochemical properties and displayed a unilamellar structure. Liposome prepared using the optimal formulation had a low particle size (158.31 ± 2.96 nm) and acceptable %increase in the particle size (15.09% ± 3.76%) and %trolox equivalent antioxidant capacity (%TEAC) loss (35.69% ± 0.72%) against UV light treatment (280–320 nm) for 6 h. The interesting outcome of this research was the association of naturally occurring substance SQ for size reduction without the extra input of energy or mechanical procedures, and improvement of vesicle stability and antioxidant activity of ML-based liposome. This study also demonstrated that the presence of SQ in the membrane might increase the acyl chain dynamics and decrease the viscosity of the dispersion, thereby limiting long-term stability of the liposome.     

Mussel‐inspired method to decorate commercial nanofiltration membrane for heavy metal ions removal

Nanofiltration (NF) membranes have been widely used for the treatment of electroplating, aerospace, textile, pharmaceutical, and other chemical industries. In this work, halloysite nanotubes (HNTs) were directly anchored on the surface of commercial nanofiltration (NF) membrane by dopamine modification following advantageous bio‐inspired methods. SEM and AFM images were used to characterize the HNTs decorated membrane surface in terms of surface morphology and roughness. Water contact angle (WCA) was employed in evidencing the incorporation of HNTs and dopamine in terms of hydrophilicity or hydrophobicity. Augmentation of HNTs was found to obviously enhance the hydrophilicity and surface roughness resulting in improved water permeability of membrane. More importantly, the rejection ratios of membrane also increased during the removal of heavy metal ions from wastewater. The permeability and Cu²⁺ rejection ratio of modified NF membrane were as high as 13.9 L·m^?2·h^?1·bar^?1 and 74.3%, respectively. Incorporation of HNTs was also found to enhance the anti‐fouling property and stability of membrane as evident from long‐term performance tests. The relative concentration of HNTs and dopamine on membrane surface was optimized by investigating the trade‐off between water permeability and rejection ratio.     

Liquid-Liquid Extraction of Indium(III) from the HCl Medium by Ionic Liquid A327H+Cl− and Its Use in a Supported Liquid Membrane System

Ionic liquid A327H⁺Cl⁻ was generated by reaction of tertiary amine A327 and HCl, and the liquid-liquid extraction of indium(III) from the HCl medium by this ionic liquid dissolved in Solvesso 100 was investigated. The extraction reaction is exothermic. The numerical analysis of indium distribution data suggests the formation of A327H⁺InCl₄⁻ in the organic phase. The results derived from indium(III) extraction have been implemented in a supported liquid membrane system. The influence of the stirring speed (600–1200 min⁻¹), carrier concentration (2.5–20% v/v) in the membrane phase, and indium concentration (0.01–0.2 g/L) in the feed phase on metal transport have been investigated.     

Antibiotics Separation with MXene Membranes Based on Regularly Stacked High‐Aspect‐Ratio Nanosheets

The uncontrolled release of antibiotics and pharmaceuticals into the environment is a worldwide increasing problem. Thus, highly efficient treatment technologies for wastewater are urgently needed. In this work, seven kinds of typical antibiotics (including water and alcohol soluble ones) are successfully separated from the corresponding aqueous and ethanolic solutions using highly regular laminated membranes. Our membranes are assembled with 2–4 μm titanium carbide nanosheets. The solvent permeance through such titanium carbide membrane is one order of magnitude higher than that through most polymeric nanofiltration membranes with similar antibiotics rejection. This high flux is due to the regular two‐dimensional (2D) structure resulting from the large aspect ratio of titanium carbide nanosheets. Moreover, the electrostatic interaction between the surface terminations and the antibiotics also affects the rejection and enhances the antifouling property. Such 2D titanium carbide membranes further broaden the application scope of laminated materials for separation and purification of high value added drugs in academia and industry.     

Preparation and characterization of a homobifunctional silicone rubber membrane grafted with acrylic acid via plasma-induced graft copolymerization

Polyacrylic acid (PAA) was grafted onto the surface of silicone rubber membrane (SR) by plasma-induced graft copolymerization (PIP). Ar-plasma was used to activate the surface of SR. Also, a determination was made of the influences of plasma treatment power, pressure, time, grafted copolymerization reaction time, and monomer concentration on polymerization yield. The surface properties of SR were measured by ATR-FTIR, ESCA, and SIMS. In those analyses, the elemental composition and different carbon bindings on the surface of SR were examined by ESCA with the amount of O1s/C1s being approximately 0.7 at 60 s by Ar-plasma treatment (60 W, 200 mtorr). The peroxide group introduced on SR was measured via 1,1-diphenyl-2-picryhydrazyl (DPPH). The optimum amount of peroxide groups was 6.85 × 10⁻⁸ mol/cm² at 60 s of Ar-plasma treatment. The peroxide group (33D peak) was introduced onto the surface of SR by negative spectra of SIMS analysis after SR treatment by Ar-plasma. An increase was obtained in grafted polymerization yield with a region of 5 to 50% (v/v) of acrylic acid aqueous solution. Both sites of polyacrylic acid were detected after staining by toluidine blue O. That is, a homobifunctional membrane was developed via this surface modification method. © 1996 John Wiley & Sons, Inc.     

Chemical assays of end-groups displayed on the surface of poly(ethylene terephthalate) (PET) films and membranes by radiolabeling

Poly(ethylene terephthalate) (PET) films and track-etched microporous membranes naturally display, on their surfaces, reactive chain-ends, i.e. carboxyl and hydroxyl functions. These were assayed by suitable activation (reaction with carbodiimide and tosyl chloride, respectively), followed by coupling with ³H-lysine and liquid scintillation counting of the sample-associated radioactivity. Values ranging between 5 and 30 pmol/cm² (open surface) of labeled end-groups were obtained, depending on the physico-chemical nature of the samples. Basic hydrolysis enriched the PET films with both types of endings (15–25 pmol/cm²). Reduction of films with the NaBH₄-catechol complex in tetrahydrofuran enriched their surfaces with hydroxyl groups. However, this procedure was not readily applicable to the surface modification of membranes; we observed an erosion effect that was confirmed by scanning electron microscope analyses. In contrast with the reduction process, the oxidation with KMnO₄ in 1.2N H₂SO₄ could be easily applied to the modification of either films or membranes; their surfaces were significantly enriched with carboxyl groups (15–50 pmol/cm²). This surface modification strategy has been used for the covalent coupling of adhesive proteins on PET membranes developed as supports for cell cultivation.