烷基苯磺酸盐型表面活性剂的HPLC及HPCE分离分析进展*

作为一种常见的表面活性剂,烷基苯碘酸盐（ABS）被广泛用于许多领域。本文结合作者最近的研究结果,对烷基苯磺酸盐表面活性剂的HPLC及HPCE分离分析现状及其应用前景进行了综述。     

A parametric investigation of the friction performance of PC‐ABS parts processed by FDM additive manufacturing process

The friction performance is an important factor of parts processed by fused deposition modeling (FDM) for various engineering applications. It is one type of failure made of surface contact. The proper use of FDM process parameters can bring a significant reduction in friction and the amount of wear, thereby leading to a reduction in the material waste. To date, very little studies have been performed in this area. This paper investigates the effect of FDM manufacturing parameters on the friction performance of polycarbonate‐acrylonitrile butadiene styrene prototypes processed by FDM using definitive screening design and partial least squares method. The observation of surface morphology was obtained by the scanning electron microscopy to examine the effect of process parameters on the microstructure. The experimental results have shown that layer thickness, air gap, raster angle, and build orientation are the most influential factors affecting the friction performance of FDM manufactured parts. The proposed approach presented in this study provides an impetus to develop analytical modeling and functional relationships between FDM manufacturing parameters and friction performance. Copyright © 2017 John Wiley & Sons, Ltd.     

PP/PC共混材料的研究概况

从加工方式对制备简单机械共混PP/PC共混物性能的影响,增容体系中增容剂的种类、增容效果和不同填充物对共混体系的增强效果三方面综述了近年来国内外对PP/PC共混材料的研究概况,指出了其研究方向和发展前景。     

NMR频率综合器的微机控制

为实现ＰＴＳ系列频率综合器的微机控制，设计了一种简单的控制电路。在微机的控制下，通过该电路与微机的并行通讯口，用Ｃ语言编写的控制程序可以很方便的控制频率综合器的输出频率。控制程序采用菜单操作，电路所需的＋５Ｖ电源由微机提供，整个控制系统简单实用，值得推广。     

Kinetics and mechanism of grafting of undecylenic acid onto acrylonitrile–butadiene–styrene terpolymer

The graft copolymerization of undecylenic acid onto acrylonitrile–butadiene–styrene terpolymer (ABS) was initiated with benzoyl peroxide (BPO) in a 1,2‐dichloroethane solution. IR spectra confirmed that undecylenic acid was successfully grafted onto the ABS backbone. The influence of the concentrations of undecylenic acid, BPO, and ABS on the graft copolymerization was studied. A reaction mechanism was proposed: the grafting most likely took place through the addition of poly(undecylenic acid) radicals to the double bond of the butadiene region of ABS. A monomer cage effect on the graft reaction was observed to depend on the 1.5 power of the monomer concentration from the experimental results of the initial rate of graft copolymerization. The initial rate of graft copolymerization was written as R_p = 1.77 × 10⁻³[P][I₂][M]^2.5/([P]+2.75[M]^2.5)². © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 486–494, 2001     

A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.     

ABS blends with phenoxy: morphology,thermal, mechanical and rheological properties

Blends of ABS (acrylonitrile–butadiene–styrene) with phenoxy(poly(hydroxyether bisphenol A)) were prepared using a Branender single screw extruder. Scanning and transmission electron micrographs (SEM, TEM) showed a typical two-phase morphology; particle-in-matrix (90/10) (ABS/phenoxy by weight), 70/30, 10/90), island/sea (30/70) and co-continuous (50/50) morphologies. The glass transition temperature (T_g) of SAN was almost unchanged in the blends, while the T_g of phenoxy increased by about 5 °C in the blends. The synergistic effect of tensile modulus and strength was noted in ABS-rich blends, where a drastic drop of ductility was seen, and the results were interpreted in terms of rubber particle migration form SAN to phenoxy phase, which was visualized by TEM. Melt viscosity showed yield in ABS-rich blends, and generally followed the log additivity.     

Cytoprotective effect of selenium polysaccharide from Pleurotus ostreatus against H2O2-induced oxidative stress and apoptosis in PC12 cells

One main fraction of Selenium-enriched Pleurotus ostreatus (P. ostreatus) polysaccharide (Se-POP-1) was extracted and purified by DEAE-52 and sephadex G-100. Se-POP-1 was an approximate homogenous polysaccharide with an average molecular weight of 1.62 × 10⁴ Da, and mainly composed of glucose, mannose and galactose, with molar ratio of 5.30:1.55:2.14. The absorption peaks at 941 cm^?1 and 1048 cm^?1 in FT-IR analysis were ascribed as C-O-Se and Se=O bonds. Pr-treatment of Se-POP-1 (400 μg/mL) increased the cell survival of H₂O₂-stimulated PC12 cells and inhibited intrinsic apoptosis and oxidative stress in H₂O₂-stimulated PC12 cells via limiting DNA degradation and decreasing the reactive oxygen species (ROS) generation. In addition, up-regulation of anti-apoptotic protein Bcl-2, down- regulation of pro-apoptotic protein Bax, cleaved caspase 3, and cytochrome c were also observed. Se-POP-1 presented an obvious effect to alleviate oxidative damage and apoptosis in PC12 cells induced by H₂O₂. Therefore, Se-POP-1 possessed potent antioxidant and biological activities with the ability to prevent oxidation via scavenging ROS and free radicals in cells. It could be developed as organic selenium dietary supplement and functional food.     

Preparation of Antioxidant Protein Hydrolysates from Pleurotus geesteranus and Their Protective Effects on H2O2 Oxidative Damaged PC12 Cells

Pleurotus geesteranus is a promising source of bioactive compounds. However, knowledge of the antioxidant behaviors of P. geesteranus protein hydrolysates (PGPHs) is limited. In this study, PGPHs were prepared with papain, alcalase, flavourzyme, pepsin, and pancreatin, respectively. The antioxidant properties and cytoprotective effects against oxidative stress of PGPHs were investigated using different chemical assays and H₂O₂ damaged PC12 cells, respectively. The results showed that PGPHs exhibited superior antioxidant activity. Especially, hydrolysate generated by alcalase displayed the strongest 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity (91.62%), 2,2-azino-bis (3-ethylbenzothia zoline-6-sulfonic acid) (ABTS) radical scavenging activity (90.53%), ferric reducing antioxidant power, and metal ion-chelating activity (82.16%). Analysis of amino acid composition revealed that this hydrolysate was rich in hydrophobic, negatively charged, and aromatic amino acids, contributing to its superior antioxidant properties. Additionally, alcalase hydrolysate showed cytoprotective effects on H₂O₂-induced oxidative stress in PC12 cells via diminishing intracellular reactive oxygen species (ROS) accumulation by stimulating antioxidant enzyme activities. Taken together, alcalase hydrolysate of P. geesteranus protein can be used as beneficial ingredients with antioxidant properties and protective effects against ROS-mediated oxidative stress.     

Synthesis,structural characterization and in vitro cytotoxic activity of novel polymeric triorganotin(IV) complexes of urocanic acid

Two novel triorganotin carboxylate complexes of the biologically active urocanic acid have been synthesized and characterized. Elemental analysis, melting point, spectroscopic techniques – IR, ¹H, ¹³C and ¹¹⁹Sn NMR – mass spectrometry and X‐ray diffraction studies have been used for structural characterization. Crystal structures of the tin(IV) derivatives show that urocanic acid acts as a bridging bidentate ligand through its imidazole nitrogen atom and its carboxylic group, producing a polymeric one‐dimensional chain. The molecular structures of the complexes, catena‐poly‐tri(n‐butyl)tin(IV) 3‐(3H‐imidazol‐4‐yl)prop‐2‐enoate (1) and catena‐poly‐triphenyltin(IV) 3‐(3H‐imidazol‐4‐yl)prop‐2‐enoate (2), present a distorted trigonal–bipyramidal configuration. This is further confirmed by ¹¹⁹Sn NMR in the solid state. The tin(IV) derivatives form double‐stranded ribbons via N―H^…O―H bonds. Nevertheless, the compounds are essentially monomeric in solution, with a tetrahedral configuration as observed by ¹¹⁹Sn NMR in solution. The cytotoxic activity of the titled compounds has been tested against six human cell lines and the corresponding IC₅₀ values are reported. Both tin(IV) compounds have a high to very high in vitro cytotoxic activity against the tumor cell lines K562, HCT‐15 and MCF‐7. Compound 1 is 86 times more active than cisplatin in the HTC‐15 cell line. Copyright © 2012 John Wiley & Sons, Ltd.