基于仿生膜的功能化单纳米通道在分析化学中的应用

灵感来源于蛋白质离子通道的仿生功能化单纳米通道,已逐渐成为一种成熟的单分子检测技术和离子整流器。功能化纳米通道包括两种:基因改造的蛋白质纳米通道和固体加工的纳米通道。常用的固体纳米通道有三种:在纳米氮化硅或石墨烯上用聚焦离子束(FIB)或电子束(FEB)轰击得到的纳米通道,化学腐蚀聚合物薄膜中的重金属离子轨迹得到的锥形纳米通道和拉制毛细管或激光刻蚀得到的玻璃纳米孔。相对于蛋白质纳米通道,固态的人工纳米通道具有更优越的机械稳定性,并可用于各种功能基团的修饰。经过近十年的发展,包括蛋白质纳米通道在内的各种仿生的纳米通道已广泛用于对小分子、蛋白质和聚合物等其他一些对象的定性和定量检测。本综述详细介绍了近年来国内外该领域的发展,并对未来的发展方向作了简要的展望。     

A novel application of immobilization on membranes for the separation and spectrofluorimetric quantification of amiloride and furosemide in pharmaceutical samples

A new, simple and highly sensitive method for spectrofluorimetric determination of amiloride (AMI) and furosemide (FUR) in pharmaceuticals is presented. The proposed method is based on the separation of AMI from FUR by solid-phase extraction using a nylon membrane, followed by spectrofluorimetric determination of both drugs, on the solid surface and the filtered aqueous solution, respectively. AMI shows low native fluorescence, but its separation-preconcentration by immobilization (solid-phase extraction) on nylon membrane surface provides a considerable enhancement in fluorescence intensity. The fluorescence determination is carried out at λ_ex = 237, λ_em = 415 nm for FUR; and λ_ex = 365, λ_em = 406 nm for AMI. The calibration graphs are linear in the range 3.20 × 10⁻⁴ to 0.8 μg mL⁻¹and 1.33 × 10⁻³ to 4.0 μg mL⁻¹, for AMI and FUR, respectively, with a detection limit of 9.62 × 10⁻⁵ and 4.01 × 10⁻⁴ μg mL⁻¹ (S/N = 3). The commonly found excipients in commercial pharmaceutical formulations do not interfere. The developed method is successfully applied to the determination of both drugs in pharmaceutical formulations.     

Hollow fiber supported liquid membrane extraction for ultrasensitive determination of trace lead by portable tungsten coil electrothermal atomic absorption spectrometry

Hollow fiber supported liquid membrane extraction (HF-SLME) was used to separate and enrich trace lead from a large volume of 250 mL water sample to a final tiny volume of 30 μL of 1-octanol, 5 μL of which was inject into a tungsten coil electrothermal atomic absorption spectrometer (W-coil ET-AAS) for determination of lead. Some important parameters that influenced the extraction and determination were investigated in detail, such as the concentration of ammonium pyrrolidine dithiocarbamate (APDC), pH of sample solution, stirring rate, extraction time, pyrolysis current, atomization current, carrier gas flow rate, as well as interferences. Under the optimized conditions, a practical enrichment factor of 499 and a limit of detection (3σ) of 0.2 ng mL^{− 1} were obtained. The calibration curve was linear in the range of 0.5–10 ng mL^{− 1}. The relative standard deviation (RSD) was 5.6% for five measurements of a 4 ng mL^{− 1} lead standard solution. The accuracy of this method was examined by the analysis of certified reference water samples (GBW(E)080398 and GSBZ(E) 50009-88) for lead. Finally, the proposed method was applied to the determination of lead in local tap water, pond water and river water, with recoveries in the range of 96–109% for spiked samples.     

Monitoring of malolactic fermentation in wine using an electrochemical bienzymatic biosensor for l-lactate with long term stability

l-lactic acid is monitored during malolactic fermentation process of wine and its evolution is strongly related with the quality of the final product. The analysis of l-lactic acid is carried out off-line in a laboratory. Therefore, there is a clear demand for analytical tools that enabled real-time monitoring of this process in field and biosensors have positioned as a feasible alternative in this regard. The development of an amperometric biosensor for l-lactate determination showing long-term stability is reported in this work. The biosensor architecture includes a thin-film gold electrochemical transducer selectively modified with an enzymatic membrane, based on a three-dimensional matrix of polypyrrole (PPy) entrapping lactate oxidase (LOX) and horseradish peroxidase (HRP) enzymes. The experimental conditions of the biosensor fabrication regarding the pyrrole polymerization and the enzymes entrapment are optimized. The biosensor response to l-lactate is linear in a concentration range of 1 × 10⁻⁶–1 × 10⁻⁴ M, with a detection limit of 5.2 × 10⁻⁷ M and a sensitivity of – (13500 ± 600) μA M⁻¹ cm⁻². The biosensor shows an excellent working stability, retaining more than 90% of its original sensitivity after 40 days. This is the determining factor that allowed for the application of this biosensor to monitor the malolactic fermentation of three red wines, showing a good agreement with the standard colorimetric method.     

Synthesis,characterization of naphthalene‐based polyimides,and their use as immobilized enzyme membrane

A new monomer, 1,5‐bis(p‐dimethylaminophenylimino)naphthalene, was prepared through Schiff‐base condensation reaction of 1,5‐diaminonaphthalene and 4‐(dimethylamino)benzaldehyde in the presence of ethanol. A series of aromatic polyimides bearing naphthalene and ? CH?N? groups were synthesized from the diamine with five kinds of commercial dianhydrides via a conventional one‐stage process. The resulting naphthalene based polyimides (NBPs) showed good solubilities in N‐methyl‐2‐pyrrolidone and m‐cresol. NBPs had glass‐transition temperatures at 139–174°C and 10% weightloss temperatures above 430 °C in nitrogen atmospheres. Excellent properties of NBPs are attributed to the incorporation of the naphthalene and ? CH?N? group in 1,5‐bis(p‐dimethylaminophenylimino)naphthalene. Moreover, chemically prepared polyimides were used for immobilization of glucose oxidase (GOx). The amperometric responses of the NBPs‐GOx‐Pt electrodes toward glucose were examined at a potential of 0.7 V in PBS solution by means of time‐base (TB) technique. Results show that NBPs bearing ? O? group membrane (PI‐3) has many advantages in the immobilization of glucose oxidase because of its strong adherence to electrode surface and chemical stability and selectivity. Copyright © 2010 John Wiley & Sons, Ltd.     

Improving the hydrophilic and antifouling properties of poly(vinyl chloride) membranes by atom transfer radical polymerization grafting of poly(ionic liquid) brushes

In this study, poly(1‐butyl‐3‐vinylimidazolium bromide) (PBVIm‐Br) was grafted onto the poly(vinyl chloride) (PVC) membrane surface via a 2‐step atom transfer radical polymerization (ATRP) reaction. Poly(2‐hydroxyethylmethacrylate) (PHEMA) was grafted onto the membrane surface by aqueous ATRP reaction; then, BVIm‐Br was introduced onto the surface of the PHEMA‐modified PVC membrane through traditional ATRP reaction. The analysis of surface chemistry confirmed the successful grafting of PHEMA and PBVIm‐Br on PVC membrane surface, and the grafting density (GD) of PBVIm‐Br gradually increased as the grafting time was prolonged. The modified membrane exhibited a positive charge and significantly enhanced surface hydrophilicity. The static water contact angle of the membrane surface decreased from 92.3° to 51.6° as the GD of the PBVIm‐Br brushes increased. Filtration experiments indicated that the water flux of the modified membrane increased with increasing GD, and their recovered fluxes were more than twice than the original. In addition, the total fouling ratio of the membranes decreased from 89% in M0 to 67% in M5, and most of the fouling was reversible as the GD of PBVIm‐Br brushes increased. These results indicated that the positive charged poly(ionic liquid) brushes featuring hydrophilic properties would have potential applications in membrane separation.     

Optical pH Sensor Based On Chemical Modification of Polymer Film

A new low-cost pH sensor developed by immobilizing a direct indicator dye to porous and transparent acetylcellulose film. This sensor was fabricated by binding α-Naphthyl Red and Alizarine Yellow GG to a cellulose acetate film that had previously been subjected to an exhaustive base hydrolysis. The membranes have good durability (>12 months) and a short response time (<5 s). The method is easy to perform and uses acetylcellulose as a carrier. The reagents used for the activity of the cellulose support are inexpensive, nontoxic, and widely available. The Alizarine Yellow GG sensor can be used for direct determination of pH in alkaline media without any alkaline error.     

Ethanol production in a membrane bioreactor

Pilot plant trials were conducted in a corn wet mill with a 7000-L membrane recycle bioreactor (MRB) that integrated ceramic microfiltration membranes in a semi-closed loop configuration with a stirred-tank reactor. Residence times of 7.5–10 h with ethanol outputs of 10–11.5% (v/v) were obtained when the cell concentration was 60–100 g/L drywt of yeast, equivalent to about 10⁹−10¹⁰ cells/mL. The performance of the membrane was dependent on the startup mode and pressure management techniques. A steady flux of 70 L/(m²·h) could be maintained for several days before cleaning was necessary. The benefits of the MRB include better productivity; a clear productstream containing no particulates or yeast cells, which should improve subsequent stripping and distillation operations; and substantially reduced stillage handling. The capital cost of the MRB is $21–$34/(m³·yr) ($0.08–$0.13/[gal·yr]) of ethanol capacity. Operating cost, including depreciation, energy, membrane replacement, maintenance, labor, and cleaning, is $4.5–9/m³ ($0.017–$0.034/gal) of ethanol.     

Improved Resolution of Hydrophobic Penicillin-binding Proteins and Their Covalently Linked Complexes on a Modified C18 Reversed Phase Column

ABSTRACT

Hydrophobic proteins have proven to be difficult to separate chromatographically. The use of a C18 reversed phase column with embedded polar groups showed improved separation and recovery of the hydrophobic, membrane associated, penicillin-binding proteins of Bacillus subtilis and their covalently linked complexes. The covalently linked complexes were generated by a time course reaction of the non-covalently associated complexes in the intact cell with the paired group specific reagent, cyanogen (C₂N₂).