以阴离子交换纤维素膜作基质室温燐光法测定痕量2,6-二氨基嘌呤的研究

本文对2,6-二氨基嘌呤(DAP)在不同的基质上和不同的重原子微扰剂存在下的室温燐光(RTP)强度进行比较,结果表明,NaI-NaAc是有效的重原子体系。适宜的固体基质为阴离子交换纤维素(二乙氨基乙基纤维素)膜(DEAE)和慢速定量滤纸。前者对酸度的变化具有较好的缓冲能力,本文提出了以DEAE为固体基质,测定痕量DAP的RTP法。     

高分子微泡的研究——Ⅰ.二烯丙基二(十二烷基)季铵盐的合成与聚合

本文合成了二烯丙基二(十二烷基)溴化铵(DADD),用超声波分散其水溶液而形成微泡。用γ射线、偶氮二异丁睛(AIBN)、过硫酸铵(APS)引发使微泡发生聚合,井对所得的微泡进行表征。实验结果证明:用γ射线引发能使微泡双分子膜发生全部聚合、而用AIBN,APS引发则只能发生部分聚合,聚合后,微泡的形状(态),渗透性行为、相转变温度等都未发生变化,但其稳定性却提高了,用断裂电镜证实了本文所合成的微泡是单室的双分子膜微泡。     

Immobilization of Glucose Oxidase on Cellulose／Cellulose Acetate Membrane and its Detection by Scanning Electrochemical Microscope （SECM）

Cellulose/cellulose acetate membranes were prepared and functionalized by introducingamino group on it, and then immobilized the glucose oxidase (Gox) on the functionalizd membrane.SECM was applied for the detection of enzyme activity immobilized on the membrane.Immobilized biomolecules on such membranes was combined with analysis apparatus and can beused in bioassays.     

分子印迹技术在样品前处理中的应用

分子印迹聚合物具有选择性高、稳定性好及制备简单的特点,可用于生物、医药、环境样品等复杂基体中痕量分析物的高选择性分离与富集,因此在样品前处理中的应用特别引人关注.本文介绍了分子印迹技术的基本原理,综述了分子印迹技术在样品前处理中应用的研究进展.     

Utilization of a spiropyran derivative in a polymeric film optode for selective fluorescent sensing of zinc ion

Spiropyrans are the most studied families of func- tional materials due to their reversible structural con- version in response to external optical, chemical, and thermal stimulation[1]. Irradiation with ultraviolet light causes formation of an extended π-conjugation open form (merocyanine form) by heterolytic cleavage of the C (spiro)-O bond, which generates an intense ab- sorption in the visible region. Under the irradiating of visible light, the opened form will come back to the closed spi…     

Selective transport of cesium ion in polymeric CTA membrane containing calixcrown ethers

A series of calixcrown ethers for which the cavity size of the crown ring is varied from crown-6 to crown-7 to crown-8 were examined for the transport abilities toward alkali metal ions. These ligands were incorporated into supported liquid membranes (SLMs) and into polymer inclusion membranes (PIMs) composed of cellulose triacetate (CTA) as a support and 2-nitrophenyl octyl ether (NPOE) and tris(2-butoxyethyl) phosphate (TBEP) as a plasticizer. In both membrane systems, calixcrown-6 showed the best selectivity toward a cesium ion over other alkali metal ions. The polymeric CTA membrane showed more rapid transport rate as well as higher durability than did the SLMs.     

Thermocontrolling ion permeation through binary component membrane composed of crown ether liquid crystal/PVC

In view of the nature of orderness in structure and the mesomorphism in property of liquid crystal, the function of which is further exploited by integrating it with the feature of crown ether. The monoarmed crown ether liquid crystals are successfully applied to the imitation of biomembrane transport. Binary component membrane composed of crown ether liquid crystal and PVC was first developed. Such a novel model of biomimetic membrane is capable of imitating ingeniously the thermocontrolling transport of biomembrane, thus the essential function of liquid crystal in membane transport is more fully exploited. It was suggested, consequently, that the molecules of the crown ether liquid crystal could assemble themselves to form ionic channels, as they exist in mesophase.Of still more significance is that the thermocontrolling transport of ions through the membrane is found to be operative selectively and the permeation of ion is under the direct influence of the thermal turmoil of the crown ether liquid cr     

Affinity enrichment of plasma membrane for proteomics analysis

Proteomics analysis of plasma membranes from cells exposed to different extracellular environments is potentially a powerful approach for the identification of membrane-associated proteins responding to these environments. Preparation of high concentration plasma membrane fractions with low contamination from cellular organelles is essential for such studies. Here, we describe an affinity enrichment method, which combines cell surface biotinylation with affinity enrichment by immobilized streptavidin beads, for the isolation of plasma membranes. This method results in a 400-fold enrichment of plasma membrane relative to endoplasmic reticulum, a major contaminant in standard plasma membrane preparations, and dramatically reduces contamination from other cellular organelles. The biotinylation reaction did not interfere with ligand-dependent activation of receptor tyrosine kinases or G-protein coupled receptors, suggesting cell-surface signal transduction machinery remains functional. Membrane fractions prepared by this method should provide excellent starting materials for membrane proteomics analysis such as studies of dynamic trafficking and regulation of signaling molecules or identification of disease-specific membrane markers.     

Immobilization of glucose oxidase with the blend of regenerated silk fibroin and poly(vinyl alcohol) and its application to a 1,1′- dimethylferrocene-mediating glucose sensor

The structure and properties of the blend of regenerated silk fibroin (RSF) and poly(vinyl alcohol) (PVA) were investigated. The two polymers in the blend are in the state of phase segregation. Infrared (IR) spectra indicate that the RSF in the blend maintains its intrinsic properties, thus, ethanol treatment can transfer silk I structure of RSF to silk II structure. The water absorption property and mechanical property of the blend are improved in comparison with those of RSF. The blend maintains the major merit of RSF, that is, it can immobilize glucose oxidase on the basis of the conformational transition from silk I structure to silk II structure. The properties of the immobilized enzyme are examined. Moreover, the second generation of glucose sensor based on the immobilized enzyme is fabricated and it has a variety of advantages including easy maintenance of enzyme, simplicity of construction, fast response time and high stability.     

Preparation and characterization of silica—polyimide composite membranes coated on porous tubes for CO2 separation

Silica-polyimide microcomposite membranes were prepared on γ-alumina-coated α-alumina support tubes, and their gas permeation properties were evaluated with He, N₂ and CO₂. Smoothing of the substrate surface and hybridization of silica and polyamic acid were both effective to form defect-free thin composite membranes. The CO₂ permeance of a membrane with a silica content of 68 wt% was one order of magnitude higher than that of a polyimide membrane having the same thickness. The permselectivity of CO₂ to N₂ was 30 at 30°C and 13 at 100°C. Contributions of the silica and polyimide phases to permeance of the composite membrane were analyzed with a two-phase permeation model. The effective thickness of the rate-controlling polyimide phase was less than one-tenth of the total thickness of the silica-polyimide membrane.