Thermochemical study of aliphatic and phenyl-substituted geminal diacetates

The standard enthalpies of combustion _c H ^o of aliphatic diacetates1 and aromatic diacetates2 were measured calorimetrically. The enthalpies of vaporization _vap H ^o or sublimation _sub H ^o of1 and2 were obtained from the temperature function of the vapor pressure measured in a flow system. From _f H ^o(g) of1 and2 new values of group increments for the estimation of standard enthalpies of formation of these classes of compounds were derived. The geminal interaction energy between the geminal acyloxy groups shows no anomeric stabilization.Geminal Substituent Effects, Part 12, for part 11 see Ref. 7.     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

CeO2—LnO1.5固溶体的表征及其甲烷催化燃烧性能

向CeO2中引入Ln3 离子后形成的CeO2－LnO1.5（Ln=La，Nd，Sm，Gd）固溶体（n（Ce）：n（Ln）=1：1）是一种无贵金属的新型高效甲烷燃烧催化剂．比表面、XRD、Raman、TEM等分析证实，这类固溶体具有部分畸变的萤石结构，Ln3 进入晶格后诱发的结构变化使得团溶体的表面和本体能同时参与氧化还原反应．实验表明，该固态溶液体系是甲烷催化燃烧的良好催化剂．     

Fast determination of evaporation enthalpies of solvents and binary mixtures using a microsilicon chip device with integrated thin film transducers

A silicon chip device with two types of integrated platinum thin film resistors was applied for microcaloric measurements. It was shown that the device is capable of fast characterization of liquid evaporation behaviour and allows the determination of evaporation enthalpies for pure liquids and mixtures. The applicability was demonstrated for a wide range of solvents from nonpolar aliphatic solvents over polar organics to protic solvents (e.g. iso-octane, toluene, acetone, ethanol, methanol and water). The sample volumes were in the range of about 2-5 μL. The determination of transient times, in case of constant power mode, or the power integral over time was used for the fast estimation of binary liquid mixtures. Thermo-resistive measurements of 5 μL droplets of solvent mixtures like methanol/iso-propanol, ethanol/water, iso-octane/iso-propanol and iso-octane/1,4-dioxane showed significant changes in temperature characteristics and evaporation enthalpies in dependence on composition. The applied heating power was about 1 W, which corresponds to measurement times between a few seconds and a minute.     

高频燃烧红外吸收光谱法测定钨钛合金中碳含量

建立高频燃烧红外吸收光谱法测定钨钛合金中碳含量的分析方法。在1980 W分析功率下,称取0.3 g样品,以2.0 g钨锡及0.5 g纯铁混合助熔,用高频红外分析仪测定碳。碳的含量在0.013%~0.050%范围内与红外吸收峰面积线性相关,相关系数为0.9993。碳的测定下限为3.6μg/g,方法检出限为1.08μg/g。该法测定结果的相对标准偏差为2.97%~4.11%(n=8),碳的加标回收率为96.2%~103.1%。该方法能够满足合金中碳含量的分析要求。     

Catalytic combustion of chlorobenzene over V2O5/TiO2 catalysts prepared by the precipitation-deposition method

Catalytic combustion of chlorobenzene over supported vanadium oxides has been investigated. TiO₂ was prepared by the sol-gel method from titanium isopropoxide. The supported vanadium oxide catalysts have been prepared by precipitation-deposition and impregnation method and characterized by XRD, FT-Raman and TPR. In the VO_x/TiO₂catalysts prepared using the impregnation method, when vanadium loading reaches 3 wt.%, the activity shows a maximum. However, in the VO_x/TiO₂catalysts prepared by precipitation-deposition, when vanadium loading reaches 7 wt.%, the activity shows a maximum. This result suggests that the precipitation-deposition can yield a higher metal loading on the support and a high dispersion compared to the impregnation method. This revised version was published online in August 2006 with corrections to the Cover Date.     

Enthalpies of formation of methoxybenzoic acids and their dependence on structure

The energy of combustion of 2,5-dimethoxybenzoic acid has been determined using a static bomb calorimeter. The vapor pressures of the compound have been measured over a 18 K temperature interval by the Knudsen effusion technique. Heat capacity measurements betweenT=270 K andT=338 K were carried out by DSC. From these experimental results the standard molar enthalpies of combustion, sublimation, and formation in the crystalline and gaseous state at the temperature 298.15 K have been derived. With this compound, the series of mono- and dimethoxy-benzoic acids have been completed. Their_f H _m ^o values were expressed by an additive relationship, taking into account the number of methoxy groups and the number of all 1,2 interactions: an accuracy of 3.3 kJ·mol^–1 was achieved. In an alternative approach the substituent effect of the methoxy groups was evaluated within the framework of isodesmic reactions. The effect of disubstitution was referred to mono derivatives and the excess energy—the so-called buttressing effect—was evaluated (2–24 kJ· mol^–1 for individual bis derivatives). These values were explained in terms of the conformation of the methoxy group around the C_ar-O bond.     

Studying dispersoid systems

Summary Measurements of energy transformation in mitochondria are done on a capillary differential titration calorimeter CTD2156. It is important to mention that a sediment is quickly formed by the mitochondria suspension without mixing by means of a vibrating needle. During the measurements, the vibrating needle is located inside the working volume of the chamber. The design of the calorimeter is substantiated theoretically. It provides a new mode of a reagent input in the measuring volume of the calorimetric chambers. It expands the spectrum of tasks that can be solved using this instrument. In the capillary calorimeter the calorimetric chambers unit is simple and small in size. These advantages of capillary chambers provide an opportunity to unite 20 capillary calorimetric chambers in one calorimetric block. It allows designing a multi-channel titration calorimeter. There are obvious advantages of such a calorimeter over other instruments in screening researches and in researches of objects maintaining stability only for a short time.     

SOOT combustion. co and k catalysts supported on different supports

The catalytic combustion of particulate material was studied on cobalt catalysts promoted with potassium using different supports for its preparation. Silica, aluminium oxides and hydroxides, zirconium oxide and hydroxide were used as supports. The catalytic activity for combustion depends on the type of support used, the higher activity corresponding to the supported catalyst on zirconium oxide. TPR studies indicate that the interaction metal/support allows to explain the higher activity of the CoK/SiO₂ catalyst with respect to the CoK/Al₂O₃ but the high activity found in CoK/ZrO₂is not explained by this interaction. In all cases the Co and K improved the performance of the catalysts.     

PREPARATION OF CUO/γ-Al2O3 CATALYSTS FOR CATALYTIC COMBUSTION VOCS VIA PLASMA

CuO/γ-Al2O3 catalysts were prepared by plasma treatment and conventional impregnation methods. The catalytic combustion of two kinds of volatile organic compounds (VOCs), toluene and benzene, were carried out over these CuO/γ-Al2O3 catalysts. The surface properties of these catalysts were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The experimental results showed that in catalytic combustion the activity of the CuO/γ-Al2O3 catalyst prepared via plasma was much higher than that of the CuO/γ-Al2O3 catalyst prepared by conventional impregnation method. XRD results showed that an enhanced dispersion had been achieved with the plasma treatment. SEM results indicated that the size became much smaller and the surface became more uniform with the plasma treatment.