Preparation and characterization of silicalite-1 membranes prepared by secondary growth of seeds with different crystal sizes

MFI-type zeolite particles of 0.1–1 μm in diameter were prepared by adjusting tetra-n-propylammonium hydroxide (TPAOH) and water contents in synthesis mixtures. Using those particles as seeds, MFI-type zeolite membranes were prepared on the surface of a porous mullite tube by secondary growth. The membranes were formed as polycrystalline zeolite layers on and inside the porous support, and the membranes were composed of the [h 0 h]-oriented crystallites. The membrane consisting of a-oriented crystallites could be also prepared. However, the a-oriented zeolite layers were not active on the permeation properties of butanes. Rather the size and loaded amount of the seed particles influenced on the permeation properties through the membranes. As a result, the n-C₄H₁₀/i-C₄H₁₀ permselectivity could be increased to 220 by adjusting the size and the loaded amount of particles. These results suggest that the number of loaded particles affects on the permeation properties through the membranes.     

Pt/TiO_2催化剂上的氢—氧作用 Ⅰ.氢、氧的吸咐—脱附行为以及相互促进作用

本文采用程序升温脱附(TPD)技术研究了光沉积方法制备的Pt/TiO_2催化剂经过氧化、还原后氧、氢的脱附行为.光沉积过程中,Pt/TiO_2表面上可以生成大量的吸咐氢,在TPD中脱附;同时Pt/TiO_2表面上化学吸附的水在TPD过程中也可以分解释氢.氧化处理的Pt/TiO_2在TPD过程中于550～750K温区出现氧脱附峰,随着氧化温度升高,脱附峰位向高温移动,经实验证明,这种可脱附活泼氧物种的生成是由样品前身中留存氢引起的.还原处理的Pt/TiO_2在TPD过程中分别在300～600和大于600K出现两个氢脱附峰,认为是由于表面羟基和钛—氢(Ti~(4+)—H~-)物种的分解释氢引起的Pt/TiO_2上活泼氧物种的存在,增加了样品在室温条件下的吸氢量;在中温(473～573K)这种活泼氧物种则和氢发生反应,减少了TPD过程中的脱氢量;Pt/TiO_2在大于673K温度还原,可以消除活泼氧物种的影响.     

氧弹燃烧灰化法测定有机物中磷

用氧弹燃烧法灰化有机物进行元素测定，操作简便，快速，无污染，该方法用于有机物中磷的分析，结果可靠。     

Copper—A “Modern” Bioelement

Copper is a bioessential element in biology with truly unique chemical characteristics in its two relevant oxidation states +I and +II. Significant progress has been made in recent years in the elucidation of the frequently surprising biochemistry of this trace element. Those advances were especially furthered through mutual stimulation involving results from biochemistry, molecular biology, and medicine on one hand and the synthesis as well as the structural and spectroscopic characterization of low molecular weight model complexes on the other. The most notable features of protein-bound active copper are its almost exclusive function in the metabolism of O₂ or N/O compounds (NO, N₂O) and its frequent association with oxidizing organic and inorganic radicals such as tyrosyl, semiquinones, superoxide, or nitrosyl. This unique biological role of copper can be rationalized given its chemical and assumed evolutionary background.     

甲烷氧化偶联催化剂La2O3／SrCO3—BaCO3的催化活性与表征

在甲烷氧化偶联制Ｃ２烃的研究中，人们发现碱土金属与稀土金属组成的复合氧化物催化剂具有高的催化活性［１，２］．稀土化合物作为有希望的工业催化剂之一，已受到广泛的关注．一般认为，它们含有的氧空位对活化甲烷的有效氧物种有利．Ｄｅｂｅｙ等在１％Ｓｒ／Ｌａ２Ｏ...     

Reverse permeation of sodium ions driven by pH difference across a liquid membrane: time dependencies of membrane resistance and membrane potential in a reverse permeation system

The diffusional flux of sodium ions across a liquid membrane was observed as a reverse permeation phenomenon: sodium ions were transported across the membrane against their own concentration difference. A supported liquid membrane having stearic acid as an ionic carrier was used. The internal aqueous phase contained NaCl and HCl and the external aqueous phase contained NaOH of the same initial concentration as NaCl in the internal aqueous phase. The reverse permeation occurred with a long time delay. During the delay, sodium ions flowed from the acidic to alkaline solution. The diffusion coefficient of sodium ion estimated from the flux equation taking into account the Donnan equilibrium at the interface was found to be much greater than that in the membrane solvent, 1-octanol. In the same membrane system as for the flux measurement, the membrane conductance and the membrane potential were measured as a function of time. The time dependence of the membrane potential in the presteady state showed a biphasic behavior. The initial rapid phase could be attributed to the change in the phase boundary potential and the subsequent slow step to the change in the diffusion potential within the membrane. Before the steady membrane potential had been reached, the reverse permeation of sodium ions against their own concentration difference was not observed. During the slow relaxation process of the membrane potential, the membrane resistance decreased to approach the steady state. Moreover, the oscillation of membrane potential abruptly started at a time in the slow step of the potential change and continued during the steady state. It was suggested that, at the presteady state, the increase in the amount of water in the membrane would drive a drastic change in the state of the liquid membrane in the filter pore, e.g. an inverted micellar structure making.     

Comparison between the pervaporation and vapor permeation performances of polycarbonate membranes

The pervaporation and vapor permeation performance of symmetrical and asymmetrical polycarbonate membranes, prepared via a dry-phase inversion and wet-phase inversion methods, respectively, were studied by measuring the permeation rate and separation factor. It was found that the polymer concentration effect on the pervaporation performance for the symmetrical polycarbonate membrane was lower than that for the asymmetrical polycarbonate membrane. Compared with pervaporation, vapor permeation has a significantly increased separation factor with a decreased permeation rate for the symmetrical polycarbonate membrane. Water molecules preferentially dissolve into the symmetrical polycarbonate membrane and diffuse easily through the membrane.     

Transport properties of alkanes through ceramic thin zeolite MFI membranes

Polycrystalline randomly oriented defect free zeolite layers on porous α-Al₂O₃ supports are prepared with a thickness of less than 5 μm by in situ crystallisation of silicalite-1. The flux of alkanes is a function of the sorption and intracrystalline diffusion. In mixtures of strongly and weakly adsorbing gases and a high loadings of the strongly adsorbing molecule in the zeolite poze, the flux of the weakly adsorbing molecule is suppressed by the sorption and the mobility of the strongly adsorbing molecule resulting in pore-blocking effects. The separation of these mixtures is mainly based on the sorption and completely different from the permselectivity. At low loadings of the strongly adsorbing molecules the separation is based on the sorption and the diffusion and is the same as the permselectivity. Separation factors for the isomers of butane (n-butane/isobutane) and hexane (hexane/2,2-dimethylbutane) are respectively high (10) and very high (> 2000) at 200°C. These high separation factors are a strong evidence that the membrane shows selectivity by size-exclusion and that transport in pores larger than the zeolite MFI pores (possible defects, etc) can be neglected.     

聚芳醚砜薄膜的气体透过行为

研究了一系列聚芳醚砜的Ｈ２、ＣＯ２、Ｏ２、Ｎ２和ＣＨ４气体透过性能，讨论了其气体透过的温度依赖性。与双酚Ａ聚砜（ＰＳＦ）相比，几种新型聚芳醚砜的气体透过系数和气体选择系数同时有所提高。通过聚合物的分子链段活动性和自由体积数据系列变化，讨论了气体透过速率与分子结构的关系。     

Separation of Dyes from Aqueous Solutions by Paper Adsorption

Separation of the dyes methyl violet, methylene blue, and congo red from aqueous solutions by paper capillary permeation adsorption method was studied using paper. Nearly 100% of the investigated dyes could be separated under the optimum conditions. The effect of pH on the separation efficiency was studied in particular. At pH 5–9, 1.3–11, and 7–11, the maximum separation was achieved for methyl violet, methylene blue and congo red, respectively. The effects of dye concentration and some foreign ions on the separatability were examined. Moreover, the selective separation of some dyes was attempted by elution with chemical reagents.