Salpianthus macrodontus Extracts,a Novel Source of Phenolic Compounds with Antibacterial Activity against Potentially Pathogenic Bacteria Isolated from White Shrimp

This study aimed to evaluate the antibacterial activity in vitro of Salpianthus macrodontus and Azadirachta indica extracts against potentially pathogenic bacteria for Pacific white shrimp. Furthermore, the extracts with higher inhibitory activity were analyzed to identify compounds responsible for bacterial inhibition and evaluate their effect on motility and biofilm formation. S. macrodontus and A. indica extracts were prepared using methanol, acetone, and hexane by ultrasound. The minimum inhibitory concentration (MIC) of the extracts was determined against Vibrio parahaemolyticus, V. harveyi, Photobacterium damselae and P. leiognathi. The polyphenol profile of those extracts showing the highest bacterial inhibition were determined. Besides, the bacterial swimming and swarming motility and biofilm formation were determined. The highest inhibitory activity against the four pathogens was found with the acetonic extract of S. macrodontus leaf (MIC of 50 mg/mL for Vibrio spp. and 25 mg/mL for Photobacterium spp.) and the methanol extract of S. macrodontus flower (MIC of 50 mg/mL for all pathogens tested). Both extracts affected the swarming and swimming motility and the biofilm formation of the tested bacteria. The main phenolic compounds related to Vibrio bacteria inhibition were naringin, vanillic acid, and rosmarinic acid, whilst hesperidin, kaempferol pentosyl-rutinoside, and rhamnetin were related to Photobacterium bacteria inhibition.     

基于溶液温度差谱分析的ATR-FTIR原位测量方法

作为一种原位、快速、无损坏的中红外光谱分析技术,ATR-FTIR已在很多工程领域得到越来越多的应用,尤其是针对结晶过程溶液浓度的原位实时测量。水是一种常用的结晶溶剂,在中红外波段具有强吸收峰,并且在不同温度下具有光谱吸收差异性,因而不能忽略溶剂水和温度对溶液浓度的中红外光谱测量带来的影响。以朗伯-比尔定律为基础,提出采用溶液光谱减去相应温度下的溶剂光谱的方法,从而能准确地测量溶液浓度。以L-谷氨酸溶液结晶过程为例,对L-谷氨酸水溶液的原始光谱数据、溶液光谱扣除常温(25℃)溶剂水的光谱数据以及溶液光谱对应温度扣除溶剂水的光谱数据分别进行建模。结果表明,提出的对应温度差谱法能有效消除溶剂水峰对溶质光谱测量的干扰,明显地降低了溶液浓度光谱标定模型的预测误差。该方法对提高原位ATR-FTIR光谱检测精度的实际应用具有一定的参考价值。     

Development of a prototype high-current low-energy ion implanter

A high current-low energy implant system for the processing of semiconductor devices at medium-high dopant levels is described. Criteria for selection and design of ion beam components such as ion beam optics, vacuum requirements and reliability are discussed. Variations in wafer uniformities for within wafer, wafer-to-wafer and run-to-run are presented.     

Fluid-Fluid Phase Separation by Molecular Dynamics

Abstract

Miscibility of several binary fluid systems, placed in an external gravitational field, has been studied by Molecular Dynamics calculation. The results show inmiscibility and phase separation to appear as a consequence of differences in the Lennard-Jones energy parameter of molecular interaction. Two situations are primarily considered: The case of a big difference in the energy parameters of pure components and the case of a weak interaction between unlike molecules.     

Transference Numbers and Activity Coefficients of Some Alkali Metal Halide Solutions in Ethylene Glycol,Using Concentration Cells

Abstract

The reliability of the concentration cell method for determining cation transference numbers has been tested using solutions of LiCl, NaCl, KCl, NaBr and LiBr in ethylene glycol at 25°C. Concentrations in the range 0.0005 to 0.5 mol dm^?3 were used. Our transference numbers have been compared with those deduced from previous data on moving boundary and conductivity experiments. Good agreement between both sets of values has been found in most of the solutions, but significant discrepancies appear in the cases of NaBr and LiCl. The mean activity coefficients have been calculated from the EMF data and the transference numbers.     

The Effect of an Active Diluent on the Properties of Epoxy Resin and Unidirectional Carbon-Fiber-Reinforced Plastics

The influence of an active diluent on the properties of an epoxy matrix and carbon-fiber-reinforced plastics (CFRP) is investigated. The physicomechanical properties of an ED-20 epoxy resin modified with diglycidyl ether of diethylene glycol (DEG-1), the adhesion strength at the epoxy matrix–steel wire interface, and the mechanical properties of unidirectional CFRP are determined. The concentration of DEG-1 was varied from 0 to 50 wt.%. The properties of the matrix, the interface, and the composites are compared. It is stated that the matrix strength affects the strength of unidirectional CFRP in bending and not their strength in tension, compression, and shear. The latter fact seems somewhat unexpected. The interlaminar fracture toughness of the composites investigated correlates with the ultimate elongation of the binder. A comparison between the concentration dependences of adhesion strength and the strength of CFRP shows that the matrices utilized provide such a high interfacial strength that the strength of CFRP no longer depends on the adhesion of its constituents.     

预裂爆破设计参数的理论分析

本文在分析不偶合装药爆破物理过程和动态冲击压力的基础上,研究了预裂孔的破坏型态;利用相应的破坏准则,推导了预裂孔临界和允许体积装药密度的理论计算式,并在总结已有的预裂成缝理论和实验成果的基础上,用裂断力学理论对成缝机理作了进一步探讨。考虑了岩体初始应力的影响,对裂缝扩展进行了定量描述,提出了预裂爆破炮孔间距的计算表达式。     

Efficient three-step entanglement concentration for an arbitrary four-photon cluster state

We propose an entanglement concentration protocol to concentrate an arbitrary partially-entangled four-photon cluster state.As a pioneering three-step entanglement concentration scheme,our protocol only needs a single-photon resource to assist the concentration in each step,which makes this protocol more economical.With the help of the linear optical elements and weak cross-Kerr nonlinearity,one can obtain a maximally-entangled cluster state via local operations and classical communication.Moreover,the protocol can be iterated to obtain a higher success probability and is feasible under current experimental conditions.     

Optimisation of the ultrasound-assisted extraction of betalains and polyphenols from Amaranthus hypochondriacus var. Nutrisol

The present study optimised the ultrasound-assisted extraction (UAE) of bioactive compounds from Amaranthus hypochondriacus var. Nutrisol. Influence of temperature (25.86–54.14 °C) and ultrasonic power densities (UPD) (76.01–273.99 mW/mL) on total betalains (BT), betacyanins (BC), betaxanthins (BX), total polyphenols (TP), antioxidant activity (AA), colour parameters (L*, a*, and b*), amaranthine (A), and isoamaranthine (IA) were evaluated using response surface methodology. Moreover, betalain extraction kinetics and mass transfer coefficients (K_La) were determined for each experimental condition. BT, BC, BX, TP, AA, b*, K_La, and A were significantly affected (p < 0.05) by temperature extraction and UPD, whereas L*, a*, and IA were only affected (p < 0.05) by temperature. All response models were significantly validated with regression coefficients (R²) ranging from 87.46 to 99.29%. BT, A, IA, and K_La in UAE were 1.38, 1.65, 1.50, and 29.93 times higher than determined using conventional extraction, respectively. Optimal UAE conditions were obtained at 41.80 °C and 188.84 mW/mL using the desired function methodology. Under these conditions, the experimental values for BC, BX, BT, TP, AA, L*, a*, b*, K_La, A, and IA were closely related to the predicted values, indicating the suitability of the developed quadratic models. This study proposes a simple and efficient UAE method to obtain betalains and polyphenols with high antioxidant activity, which can be used in several applications within the food industry.     

Scholte波与含泥沙两相流介质属性关系的分析及仿真验证

基于四种超声悬浮液模型Urick, Urick-Ament, HT, Mcclements分析了Scholte波在两相流体与多孔介质固体界面处的传播特性. 结合各模型的复波数表达式建立含泥沙流体-多孔介质固体界面波特征方程, 分析了Scholte波速与两相流体积含量、粒径等介质属性的关系. 通过仿真实验获得界面波信号, 运用时延估计获得Scholte波速与泥沙含量、粒径的关系, 发现所得的波速与Urick-Ament和HT理论有相对好的一致性. 关键词： Scholte波 两相流体 多孔介质 泥沙含量