C4烃在FAU、BEA、LTL型分子筛中吸附的蒙特卡罗研究

应用蒙特卡罗(MC)模拟方法研究了1,3-丁二烯、1-丁烯、正丁烷三种C4烃在FAU、BEA、LTL三种分子筛中的吸附行为. 模拟分别得到了298 K时这些C4烃的纯组分在分子筛中的吸附等温线、吸附质分布和吸附热. 结果表明, 在饱和吸附状态下这些C4烃在FAU分子筛中的吸附量最大, 在BEA分子筛中的吸附量居中, 在LTL分子筛中的吸附量最少. 对于同一种分子筛来说, 正丁烷在其中的等量吸附热最大, 1-丁烯居中, 1,3-丁二烯最小. 对于同一种C4烃来说, 它在LTL分子筛中的吸附热与在BEA分子筛中的吸附热相近, 并且高于在FAU分子筛中的吸附热. 还模拟了543 K、2.0 MPa时这些C4烃的三元混合组分在分子筛中的吸附, 发现正丁烷的吸附量占的比例最大, 1-丁烯居中, 1,3-丁二烯最少.     

Quantifying temperature and flow rate effects on the performance of a fixed-bed chromatographic reactor

Chromatographic reactors are based on coupling chemical reactions with chromatographic separation in fixed-beds. Temperature and flow rate are important parameters for the performance of such reactors. Temperature affects mainly adsorption, chemical equilibria, mass transfer and reaction kinetics, whereas flow rate influences residence time and dispersion. In order to evaluate the mentioned effects, the hydrolysis reactions of methyl formate (MF) and methyl acetate (MA) were chosen as case studies. These reactions were performed experimentally in a lab-scale fixed-bed chromatographic reactor packed with a strong acidic ion exchange resin. The chosen reactions can be considered to represent a relative fast (MF) and a relative slow (MA) reaction. The processes which take place inside the reactor were described and simulated using an isothermal equilibrium dispersive model. The essential model parameters were determined experimentally at different temperatures and flow rates. The performance of the chromatographic reactor was evaluated at several discrete constant temperature levels by quantifying product purity, productivity and yield. The work provides insight regarding the influence of temperature and flow rate on values of the model parameters and the performance criteria.     

Interaction forces between adsorbed polymer layers

The interaction forces between adsorbed polymer layers were investigated. Two types of graft copolymers that were adsorbed on hydrophobic surfaces have been investigated: (i) a graft copolymer consisting of polymethylmethacrylate/polymethacrylic acid back bone (the B chain) on which several poly(ethylene oxide) chains are grafted (to be referred to as PMMA/PEO_n); and (ii) a graft copolymer consisting of inulin (linear polyfructose with degree of polymerization > 23) (the A chain) on which several C₁₂ chains are grafted (INUTEC SP1). In the first case adsorbed layers of the graft copolymer were obtained on mica sheets and the interaction forces were measured using the surface force apparatus. In the second case the interaction forces were measured using Atomic Force Microscopy (AFM). For this purpose a hydrophobically modified glass sphere was attached to the tip of the cantilever of the AFM and the glass plate was also made hydrophobic. Both the sphere and the glass plate contained an adsorbed layer of INUTEC SP1.In the surface forces apparatus one essentially measures the energy E(D)–distance D curves for the graft copolymer of PMMA/PEO_n between mica surfaces bearing the graft copolymer and this could be converted to interaction energy between flat surfaces. Using the de Gennes scaling theory, it is possible to calculate the interaction energy between the polymer layers. The same graft copolymer was used in latex dispersions and the high frequency modulus G′_∝ was measured as a function of the volume fraction ? of the dispersion. This high frequency modulus could be related to the potential of mean force. In this way one could compare the results obtained from rheology and those obtained from direct measurement of interaction forces.In the AFM method, the interaction forces are measured in the contact area between two surfaces, i.e. a spherical glass particle and a glass plate. Both glass spheres and plates were hydrophobized using dichlorodimethylsilane. Results were obtained for adsorbed layers of INUTEC SP1 in water and in the presence of various concentrations of Na₂SO₄ (0.3, 0.8, 1.0 and 1.5 mol dm^{− 3}). All results showed a rapid increase of force with a decrease of separation distance and the forces were still repulsive up to the highest Na₂SO₄ concentration. This explains the high stability of dispersions when using INUTEC SP1 as stabilizer.     

离子液体添加剂[BMIM]HSO4对锌电积过程析氧反应动力学的影响

研究了1-丁基-3-甲基咪唑硫酸氢盐([BMIM]HSO₄)离子液体对锌电积过程析氧反应的影响. 研究工作借助于动电位极化, 电化学阻抗谱, 扫描电镜和X射线衍射等测试技术. 动电位极化曲线及对应的动力学参数分析表明, [BMIM]HSO₄对阳极析氧反应具有催化作用,可提高析氧反应速率常数. 电化学阻抗谱数据表明,[BMIM]HSO₄能显著降低阳极析氧电荷传递电阻,在所研究的1.85-2.10 V电位范围内添加5 mg·L^-1 [BMIM]HSO₄, 电阻值至少降低50%. 此外, 添加剂对阳极表面二次反应具有抑制作用, 其在阳极表面的吸附,阻碍了阴离子的阳极活化位点吸附过程. 电化学测试结果与长时间(120 h)阳极极化后所得阳极表面形貌和结晶取向分析结果相一致. [BMIM]HSO₄的添加能有效抑制中间产物β-PbO₂的形成,促进铅银电极表面大块且疏松多孔α-PbO₂的生成,加速阳极析氧的进行.     

Surface adsorption behaviour of milk whey protein and pectin mixtures under conditions of air-water interface saturation

Milk whey proteins (MWP) and pectins (Ps) are biopolymer ingredients commonly used in the manufacture of colloidal food products. Therefore, knowledge of the interfacial characteristics of these biopolymers and their mixtures is very important for the design of food dispersion formulations (foams and/or emulsions). In this paper, we examine the adsorption and surface dilatational behaviour of MWP/Ps systems under conditions in which biopolymers can saturate the air-water interface on their own. Experiments were performed at constant temperature (20 °C), pH 7 and ionic strength 0.05 M. Two MWP samples, β-lactoglobulin (β-LG) and whey protein concentrate (WPC), and two Ps samples, low-methoxyl pectin (LMP) and high-methoxyl pectin (HMP) were evaluated. The contribution of biopolymers (MWP and Ps) to the interfacial properties of mixed systems was evaluated on the basis of their individual surface molecular characteristics. Biopolymer bulk concentration capable of saturating the air-water interface was estimated from surface pressure isotherms. Under conditions of interfacial saturation, dynamic adsorption behaviour (surface pressure and dilatational rheological characteristics) of MWP/Ps systems was discussed from a kinetic point of view, in terms of molecular diffusion, penetration and configurational rearrangement at the air-water interface. The main adsorption mechanism in MWP/LMP mixtures might be the MWP interfacial segregation due to the thermodynamic incompatibility between MWP and LMP (synergistic mechanism); while the interfacial adsorption in MWP/HMP mixtures could be characterized by a competitive mechanism between MWP and HMP at the air-water interface (antagonistic mechanism). The magnitude of these phenomena could be closely related to differences in molecular composition and/or aggregation state of MWP (β-LG and WPC).     

HPD-100树脂吸附小檗碱的热力学及动力学研究

研究了小檗碱在HPD-100树脂上的吸附热力学和动力学行为。考察了小檗碱在HPD-100树脂上的吸附等温曲线和吸附动力学曲线,确定了吸附过程的热力学及动力学参数。结果表明,HPD-100树脂对小檗碱的等温吸附可采用Langmuir方程描述、吸附为自发进行的放热型物理吸附过程;Dunwald–Wagnen内扩散方程能较好地拟合吸附动力学数据,吸附过程以颗粒内扩散为主要控制步骤,该吸附过程的表观活化能为29.11kJ/mol。本文为HPD-100树脂分离富集小檗碱类生物碱的实际应用提供基础数据及指导。     

Applicability of polymer theories to the thermodynamics of proteins at the air/water interface: example of β-lactoglobulin

Knowledge of the equation of state of adsorbed or deposited layers of proteins at the air/water interface is of fundamental interest in the understanding of the surface activity of these molecules. Using scaling laws of current polymer theories, it has been shown that the equation of state of the interfacial layer in the semi-dilute regime should relate the surface pressure to the surface concentration through a power law. The exponent of this power law should reflect the quality of the solvent and the conformation of the adsorbed polypeptide chain. In the case of β-lactoglobulin layers, in the range of surface concentrations that should correspond to the semi-dilute regime, the relationship between surface pressure and surface concentration is expressed as a power law. The exponent of this power law is strongly influenced by the nature of the aqueous substrate and by the net charge of the protein molecule. The use of scaling laws gives a coherent view of the expansion of the polypeptide chain in the interfacial layer and of the relationship between surface concentration and surface pressure in the semi-dilute regime. This result favours a strong similarity between β-lactoglobulin and a polymer chain in the interfacial layer. It is concluded that current theories of polymer adsorption could be applied to interfacial protein layers.     

Adsorption of oligooxypropylenated amines at the aqueous solution—air interface: Homologous series of piperidine and morpholine derivatives

The surface tension isotherms for pure oligooxypropylenated piperidine and morpholine at the aqueous solution—air interface were determined and interpreted. The surface excess concentration, Γ, the surface area per molecule, A, and the standard free energy of adsorption, ΔG°, were calculated according to a new empirical adsorption equation. The standard free energy contribution for the oxypropylene group (PO) in morpholine derivatives,ΔG° (PO) = −3.34 kJ mol⁻¹, is substantially lower than that for the PO group located in the piperidine derivatives, i.e. ΔG° (PO)= −3.12 kJ mol⁻¹.     

梳型聚合物在固液界面吸附形态的Monte Carlo模拟

采用Monte Carlo模拟方法对PAA/PEO梳型聚合物在固液界面吸附形态进行了模拟,得到了聚合物在液相中聚集形态以及在固液界面上吸附形态的瞬时构型,同时获得了聚合物的吸附层厚度、均方回转半径和吸附在固液界面的各种链段数等微观信息. 结果证实：随着聚合物的接枝数Np增大,聚合物在液相中的扩散系数逐渐降低、相对粘度逐渐增大;当Np≥6时,羧基阴离子基团置于吸附层最外围,吸附层厚度近似等于PEO侧链长度,聚合物在固体表面形成空间排斥为主、静电排斥为辅的吸附状态;吸附聚合物分子密度过低或过高均不能起到良好的空间屏蔽或阻隔效应;吸附在固体粒子表面聚合物应该具有适宜的吸附-脱附自平衡能力.     

便携式微波等离子体离子化检测器气相色谱仪用于气体分析的研究

本文使用自制的便携式微波诱导等离子体离子化检测器气相色谱仪对可燃气体中N_2、O_2、H_2和CH_4的测定方法进行了研究。以氩气为载气和工作气体,考察了改进后的微波诱导等离子体离子化检洲器(MIPID)的工作参数对测定的影响。对煤气和乙炔中的O_2、N_2、H_2和CH_4进行了测定,分析结果与热导池检测器(TCD)的气相色谱法一致。讨论了高电离电位(>11.7ev)气体组分在MIPID中响应特性。