First principles calculations of oxygen reduction reaction at fuel cell cathodes

The efficiency of solid oxide fuel cells (SOFC) depends critically on materials, in particular for the cathode where the oxygen reduction reaction (ORR) occurs. Typically, mixed conducting perovskite ABO₃-type materials are used for this purpose. The dominating surface terminations are (001) AO and BO₂, with the relative fractions depending on materials composition and ambient conditions.Here, results of recent large-scale first principles (ab initio) calculations for the two alternative polar (La,Sr)O and MnO₂ (001) terminations of (La,Sr)MnO₃ cathode materials are discussed. The surface oxygen vacancy concentration for the (La,Sr)O termination is more than 5 orders of magnitude smaller compared to MnO₂, which leads to drastically decreased estimated ORR rates. Thus, it is predicted for prototypical SOFC cathode materials that the BO₂ termination largely determines the ORR kinetics, although with Sr surface segregation (long-term degradation) its fraction of the total surface area decreases, which slows down cathode kinetics.     

PEFC catalyst layers: Effect of support microstructure on both distributions of Pt and ionomer and cell performance and durability

In order to improve the performance and durability of polymer electrolyte fuel cells (PEFCs), various improvements in the microstructures of cathode catalyst layers (CLs) were initiated in the early 1990s. More recent advances in CL materials are highlighted, including carbon supports for improved accessibility of Pt nanoparticles (NPs), adsorption of ionomer on the Pt surface, high-oxygen-permeability ionomers, corrosion resistance of mesoporous and microporous carbons, and conductive ceramic supports with a fused-aggregate network structure. These approaches are summarized as stepwise improvements. The influences of the support structure on the distribution of Pt NPs and ionomer are reviewed, as well as their effects on performance and durability. These approaches for carbon supports are extended to conductive ceramic supports and the unique advantages are discussed.     

Highly efficient,economic, and recyclable glutathione decorated magnetically separable nanocomposite for uranium(VI) adsorption from aqueous solution

A green and environment-friendly magnetically separable nanocomposite, glutathione@magnetite was fabricated sonochemically through the functionalization of Fe₃O₄ by glutathione which was well characterized using Fourier-transform infrared spectroscopy, ultravoilet-visible spectroscopy, scanning electron microscope, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, thermogravimetric analysis, vibrating sample magnetometer, Brunauer-Emmett-Teller, and high-resolution transmission electron microscope. The parameters affecting adsorption including pH, temperature, contact time, initial adsorbate concentration, and adsorbent amount were optimized by batch experiments. The magnetic glutathione@magnetite was applied for the removal of uranium(VI) in water with maximum adsorption capacity found to be 333.33 mg/g in 120 min at a neutral pH at 25 °C showing high efficiency for U(VI) ions. Furthermore, adsorption results obtained from UV-vis spectroscopy were validated by inductively coupled plasma optical emission spectroscopy. The thermodynamic parameters, viz Gibbs free energy (ΔGº), standard enthalpy change (ΔHº), and standard entropy change (ΔSº) of the process were calculated using the Langmuir constants. The pseudo-second-order kinetics model is seen to be applicable for describing the uptake process using a kinetics test. Moreover, desorption studies reveals that glutathione@magnetite can be used repeatedly, and removal efficiency shows only a small decrease after six cycles. Thus, glutathione@magnetite acts as a potential adsorbent for the removal of U(VI) from the water with great adsorption performance.     

铂合金氧还原催化剂:合成、结构和性能

质子交换膜燃料电池是一种将燃料中的化学能直接转化为电能的装置,它具有转化效率高、能量密度高、低温启动、易于操作等优点,因而被认为是最具发展前景的新能源利用方式,在电动汽车、便携电源及分散式电站有着广泛应用.但是,目前质子交换膜燃料电池技术的发展面临着巨大挑战,主要问题包括高成本、低功率密度和低寿命.众所周知,质子交换膜燃料电池中的阴极氧还原反应在酸性条件下是一个复杂的四电子过程,动力学速度缓慢,限制了电池的最终性能.目前大量使用的阴极氧还原催化剂是细小的铂或铂合金纳米颗粒负载在碳载体上,其成本占燃料电池总成本的比例最大.制约燃料电池商业化发展的另一个重要问题是电池寿命低,其中氧还原催化剂的稳定性是决定电池寿命的主要因素.在这样的研究背景下,如何降低催化剂中铂的用量、提高催化剂活性和稳定性显得尤为重要,这也是近年来国内外学者研究的热点.在铂基合金催化剂中,通常采用过渡金属元素作为掺杂元素,由于原子半径不匹配(几何效应)以及电子结构不同(电子效应),合金催化剂表现出优于纯铂催化剂的催化性能.近几年,对于铂基合金催化剂的研究已取得重大进展,以合金组成和结构研究为基础,通过精确控制原子结构、调控表面电子状态以及制备工艺,获得了各种特殊形貌的催化剂,大大提高了催化活性.本文深入综述了近年来铂基合金氧还原催化剂制备、形貌和性能,特别关注了催化剂形貌和催化活性之间的关系.值得注意的是,具有有序原子排列的铂合金催化剂不仅在半电池中表现出优异活性,在实际质子交换膜燃料电池中也显示了很好的活性和稳定性.另一方面,碳载体的形貌及微观结构也对提高催化活性和稳定性起到决定性作用,通过化学手段加强金属纳米颗粒与碳载体之间的相互作用也是提高催化剂稳定性的重要途径.尽管铂基氧还原催化剂在近几年取得了重要进展,但在实际商业化过程中还存在诸多挑战,本文在综述进展的基础上,对铂基催化剂的发展提出了展望.首先,对于氧还原反应机理仍需要深入研究,采用更加精确的理论模型模拟氧还原动力学过程,以获得影响催化活性的关键因素.其次,提高催化剂在膜电极中的催化活性和利用率.目前,氧还原催化剂在半电池测试中性能优异,但是实际燃料电池操作条件下其性能远不能达到要求,这与膜电极、催化剂层及扩散层结构相关.因此,基于不同铂基催化剂的特性,合理设计膜电极组件的结构是将催化剂进行实际应用的基础.最后,催化剂的稳定性仍需进一步提高,尽管目前大部分催化剂在实验室半电池研究中表现了很好的稳定性,但在实际燃料电池中的稳定性研究还不足,而且对催化剂在膜电极中性能衰退机理的研究也非常有限.因此,对于铂基氧还原催化剂的研发仍需要国内外科研工作者不懈的努力.     

基于氮掺杂碳载铁复合物的锌空电池氧阴极催化剂

迫在眉睫的环境和能源问题推动人类探索可行、可靠和可再生的能源技术.锌-空气电池和氢氧燃料电池等器件显示出高能量转换效率,但是仍有许多难题有待克服,例如阴极侧上缓慢的氧还原反应(ORR),以及高昂的成本极大地限制了铂基催化剂在商业上的广泛应用.因此,开发高性能的廉价ORR催化剂具有重要意义.过渡金属碳氮化合物(M-N-C, M=Co, Fe等)成为最有希望替代铂基催化剂的一类材料, M-N-C催化剂可以通过直接热解含有过渡金属、氮和碳物种的前驱体合成.然而热解时金属原子易团聚,多孔结构不能被有效地控制,导致相对较差的催化活性.目前, MOF衍生的催化剂在能源转化和储存技术中得到了广泛的关注,其具有丰富的氮含量、高比表面积和可调的孔道结构等特点.本文报道了一种简便可靠可控的合成铁氮共掺杂碳十二面体纳米结构催化剂的方法,并作为阴极电催化剂用于锌空气电池中,测试结果证实,合成的铁氮共掺杂的纳米碳具有与铂基材料相当的活性和更加优异的稳定性.表面吸附了的邻菲罗啉铁的ZIF-8在碳化过程中,氮基团能够结合铁形成Fe Nx结构单元,因此可得到铁氮共掺杂的电催化剂.粉末X射线衍射,扫描电镜证实ZIF-8的成功合成.经过热解得到的催化剂中Fe Nx或Fe Cx衍射峰较弱,表明样品中铁含量较低,存在部分无定型铁.通过拉曼光谱分析发现,引入的邻菲罗啉在热解过程中诱导了缺陷的形成,所以Fe-NCDNA-0的ID/IG比值明显高于NC.同时ID/IG随着铁含量的增加而减少,这是因为铁可以诱导石墨化,诱导效应随着铁含量的增加而增加.分析氮气吸附-脱附等温线得出,引入邻菲罗啉之后,比表面积增加;而铁的引入因其占据了微孔结构,导致比表面积下降.同时电镜证实Fe-NCDNA-2具有较大的形貌扭曲,使得该材料具有较大的比表面积.系统的电化学研究表明,氮掺杂有利于增强ORR活性,在引入铁之后形成高效的活性中心会进一步提高催化性能.因此, Fe-NCDNA-2在碱性条件下表现出优异的ORR性能.线性扫描伏安法曲线表明,铁氮共掺杂的材料表现出与Pt/C相似的性能,其中Fe-NCDNA-2的半波电位(E1/2)为0.863 V,比商业Pt/C的电位更正(E1/2=0.841 V).同时, Fe-NCDNA-2具有更加优异的稳定性,测试30000 s后的电流保持率为80%(Pt/C:64%).在中性介质中,合成的材料也展示了较高的ORR活性.Fe-NCDNA-2的E1/2=0.715 V,催化30000 s后电流保持率77%,均优于商业Pt/C催化剂.组装的锌空气电池进一步验证其作为氧还原催化剂实际应用的可行性.相比于以Pt/C为催化剂做空气阴极的电池,以Fe-NCDNA-2组装的电池表现出更高的开路电压,更高的功率密度(184 m Wcm^-2),以及更加优异的充放电循环稳定性.该工作也有利于启发研究人员探索类似的氮掺杂过渡金属碳材料在各种催化上的应用.