Structural and Dielectric Properties of Polythiophene/Chrom(III) Acetylacetonate Composites

The dielectric and morphological properties of polythiophene (PT) filled with various mass fractions of chrom(III) acetylacetonate (Cr(acac)₃), synthesized via chemical oxidative polymerization, are described. Significant shifts of the absorption peak of the C-S bond in the Fourier transform infrared (FT-IR) spectra indicated that the metal cations mostly interacted with sulfur atoms. Thermal analyses performed by differential scanning calorimetry (DSC) indicated that the cold crystallization temperature (T_cc) of PT decreased with increasing doping level. Microstructural differences were observed between PT and its composites in scanning electron microscopy (SEM) images. Dielectric measurements showed that the conductivity of the PT significantly increased with increasing doping level, from ?10^?7 S/m to ?10^?4 S/m at 10 kHz and 300 K.     

Simultaneous observation of low temperature 4f-4f and 3d-3d emission spectra in a series of Cr(III)(ox)Ln(III) assembly

We report here the low temperature emission spectra in the heterometal dinuclear 3d-4f assembled molecular system [(acac)₂Cr^III(μ-ox)Ln^III(HBpz₃)₂] (Cr(ox)Ln:acac⁻=acetylacetonate, ox²⁻=oxalate, HBpz₃⁻=hydrotris(pyrazol-1-yl)borate; Ln=La, Nd, Ho, Er , Tm and Yb) in comparison with those of Na[Cr(acac)₂(ox)] and [(HBpz₃)₂Ln(μ-ox)Ln(HBpz₃)₂](Ln=Nd and Er). From 10 to 150 K the Cr(ox)Ln complexes show a broad emission band around 800 nm from the ²E state of Cr(III) moiety. At room temperature no ²E-⁴A₂ emission was observed in the Cr(ox)Ln except for the La and Lu complexes. On warming from 10 to 300 K rapid quenching of the ²E-⁴A₂ emission of Cr(III) is suggested to result from the energy transfer from Cr to Ln in the Cr(ox)Ln. The excitation spectra and the life-time were also measured with monitoring the 4f-4f emission peaks of the Cr(ox)Yb complex.     

Synthesis and luminescence properties of lanthanide(III) chelates with polyacid derivatives of thienyl-substituted terpyridine analogues

Two new polyacid derivative ligands of thienyl-substituted terpyridine analogues, N,N,N¹,N¹-[4′-(2?-thienyl)-2,2′:6′,2″-terpyridine-6,6″-diyl]bis(methylenenitrilo) tetrakis(acetic acid) (TTTA) and N,N,N¹,N¹-[2,6-bis(3′-aminomethyl-1′-pyrazolyl)-4-(2″-thienyl)pyridine] tetrakis(acetic acid) (BTTA), were synthesized, and the luminescence properties of their Eu³⁺ and Tb³⁺ chelates were investigated. The Eu³⁺chelates of the two ligands are strongly luminescent having luminescence quantum yields of 0.150 (TTTA-Eu³⁺) and 0.114 (BTTA-Eu³⁺), and lifetimes of 1.284 ms (TTTA-Eu³⁺) and 1.352 ms (BTTA-Eu³⁺), whereas their Tb³⁺ chelates are weakly luminescent. The TTTA-Eu³⁺ chelate was used for streptavidin (SA) labeling, and the labeled SA was used for time-resolved fluoroimmunoassay of insulin in human sera. The method gives the detection limits of 33 pg ml⁻¹.     

Effects of Ⅴ/Ⅲ ratio on species diffusion anisotropy inthe MOCVD growth of non-polar a-plane GaN films

Non-polar a-plane (110) GaN films have been grown on r-plane (102) sapphire substrates by metal organic chemical vapour deposition. The influences of Ⅴ/Ⅲ ratio on the species diffusion anisotropy of a-plane GaN films were investigated by scanning electron microscopy, cathodoluminescence and high-resolution x-ray diffraction measurements. The anisotropy of a-plane GaN films may result from the different migration length of adatoms along two in-plane directions. Ⅴ/Ⅲ ratio has an effect on the growth rates of different facets and crystal quality. The stripe feature morphology was obviously observed in the film with a high V/III ratio because of the slow growth rate along the [100] direction. When the Ⅴ/Ⅲ ratio increased from 1000 to 6000, the in-plane crystal quality anisotropy was decreased due to the weakened predominance in migration length of gallium adatoms.     

Fluorescence resonance energy transfer between cerium ion(III) and levofloxacin in micellar solution and its analytical application to the determination of levofloxacin

Fluorescence resonance energy transfer between cerium ion(III) and levofloxacin is studied in a micellar solution of cetyltrimethyl ammonium bromide. A non-fluorescent 1:2 complex was formed between excited cerium ion(III) and ground state levofloxacin. The fluorescence of cerium ion(III) is quenched by levofloxacin with the quenching in accordance with the Stern–Volmer relation. The analytical relationship was established between the ratio of the fluorescence of levofloxacin present and absent cerium ion (III) and the concentration of levofloxacin, which helped to estimate the content of levofloxacin directly.     

Flow Injection Kinetic Spectrophotometric Determination of Cerium Based on the Decolorization Reaction Between Arsenazo III and Cerium (IV)

ABSTRACT

Trace amounts of cerium were analyzed by flow injection kinetic spectrophotometry, based on the decolorization reaction between arsenazo III and Ce(IV) in sulfuric acid medium at room temperature. The absorbance difference (ΔA) of decolorization was linear with the concentration of Ce(IV). The flow injection technique was used to precisely control the timing. Under the optimum conditions, the determination of Ce(IV) in the range 0.0–8.0 µg mL^?1 with a correlation coefficient (r) of 0.9982, the regression equation was ΔA = 0.0014 + 0.0406c (µg mL^?1). The detection limit (3σ) of 0.2 µg mL^?1 was achieved at a sampling frequency of 60 h^?1. The proposed method was applied to the analyses of Ce in soil successfully.     

Preconcentration and Separation of Gold(III) from Ore Samples by Solid-Phase Extraction Prior to Its Catalytic Fluorescent Determination

ABSTRACT

A new catalytic kinetic fluorescent quenching method for the determination of trace gold(III) was investigated. The method was based on the catalytic effect of gold on oxidation of 3-(3′-methylphenyl)-5- (2′-arsenoxylphenylazo) rhodanine by hydrogen peroxide in potassium hydrogen phthalate–hydrochloric acid (pH = 3.4). Under the optimum conditions, the great decrease of fluorescence intensity has a linear relationship against the concentration of gold in the range of 0 to 12.0 µg·L^?1 with a detection limit of 6.0 × 10^?10g·L^?1. The coexistent metal ions can be separated, and gold can be enriched by TBP resin of solid-phase extraction, which greatly improves the selectivity and sensitivity of the system. The method can be used to determine trace amounts of gold in ore samples successfully with satisfactory results.     

Photoinduced phase transition accompanied with the changes in magnetic properties

Recently, many studies have been started in search for materials which show a photoinduced phase transition (PIPT). In this work, we review two systems as typical examples of PIPT accompanied with changes in magnetic characteristics; (1) organo-metal complex [Fe(2-pic)₃]Cl₂ EtOH (2-pic = 2-amino-methyl-pyridine) and (2) III-V based magnetic semiconductors (In_1-x , Mn _x )As. In the former case, we show several nonlinear characteristics in dynamical process of photoinduced spin state transition from low-spin to high-spin states. In the latter one, photocarrier-induced ferromagnetic order has been observed by both magnetic and transport measurements.     

Nonlinear refractive index measurement of tris(acetylacetonato) manganese(III) solution

We present the results from investigations of the nonlinear refractive index and nonlinear absorption coefficient of tris(acetylacetonato)manganese(III) solution, using Z-scan technique with a low-power continuous-wave laser at 514 nm. We demonstrate that the light-induced nonlinear refractive index variation leads to strong self-focusing and self-defocusing. A pump and probe technique was used to investigate the cause of nonlinearity. Furthermore, the nonlinear absorption effect was utilized to demonstrate all optical switching.