The Rayleigh law in silicon doped hafnium oxide ferroelectric thin films

A wealth of studies have confirmed that the low‐field hysteresis behaviour of ferroelectric bulk ceramics and thin films can be described using Rayleigh relations, and irreversible domain wall motion across the array of pining defects has been commonly accepted as the underlying micro‐mechanism. Recently, HfO₂ thin films incorporated with various dopants were reported to show pronounced ferroelectricity, however, their microscopic domain structure remains unclear till now. In this work, the effects of the applied electric field amplitude, frequency and temperature on the sub‐coercive polarization reversal properties were investigated for 10 nm thick Si‐doped HfO₂ thin films. The applicability of the Rayleigh law to ultra‐thin ferroelectric films was first confirmed, indicating the existence of a multi‐domain structure. Since the grain size is about 20–30 nm, a direct observation of domain walls within the grains is rather challenging and this indirect method is a feasible approach to resolve the domain structure. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

The role of copper(II) and zinc(II) in the degradation of human and murine IAPP by insulin‐degrading enzyme

Amylin or islet amyloid polypeptide (IAPP) is a 37‐residue peptide hormone secreted from the pancreatic islets into the blood circulation and is cleared by peptidases in the kidney. IAPP aggregates are strongly associated with β‐cell degeneration in type 2 diabetes, as demonstrated by the fact that more than 95% of patients exhibit IAPP amyloid upon autopsy. Recently, it has been reported that metal ions such as copper(II) and zinc(II) are implicated in the aggregation of IAPP as well as able to modulate the proteolytic activity of IAPP degrading enzymes. For this reason, in this work, the role of the latter metal ions in the degradation of IAPP by insulin‐degrading enzyme (IDE) has been investigated by a chromatographic and mass spectrometric combined method. The latter experimental approach allowed not only to assess the overall metal ion inhibition of the human and murine IAPP degradation by IDE but also to have information on copper‐ and zinc‐induced changes in IAPP aggregation. In addition, IDE cleavage site preferences in the presence of metal ions are rationalized as metal ion‐induced changes in substrate accessibility. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparation of dendritic‐like CdS by hydrothermal method and its photocatalytic performance

In this article, dendritic‐like CdS has been prepared by a hydrothermal method using thiourea as the sulfur source, and the effects of experimental conditions on the morphologies of CdS have been investigated. The performances of CdS have been analyzed by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and the fluorescence and photodegradation properties of CdS have also been investigated. The XRD result indicates that the dendritic‐like CdS are of hexagonal phase and they are highly crystallized. Also, the FESEM results show that the ratio of raw material affects the yield of CdS, the reaction time affects the morphology of CdS. The best morphology of CdS is dendritic structures and the length is about 6 μm. The fluorescence spectrum shows three peaks at 470 nm, 513 nm and 547 nm, which indicates that the dendritic‐like CdS mainly emits green and blue fluorescence. Moreover, the dendritic‐like CdS exhibits good photocatalytic activity and its photodegradation rate to methylene blue can reach 92%. The growth mechanism for the formation of CdS with dendritic structure is also described.     

Optical properties of flower‐like CdS prepared by a hydrothermal method with SDBS as surfactant

In this article, flower‐like CdS structures have been prepared by a hydrothermal method with SDBS as surfactant. The influences of different experimental conditions on the morphologies, UV‐Vis and fluorescence properties of CdS have been investigated. The performances of CdS have been analyzed by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), ultraviolet‐visible (UV–Vis) and room‐temperature photoluminescence (PL). The XRD result indicates that the flower‐like CdS structures are of hexagonal phase. The FESEM results indicate that the main role of SDBS is to make the CdS crystals assemble together to form the flower‐like structures. The UV–Vis results show CdS has a strong absorption in the ultraviolet region and visible‐light region. The PL results show CdS has two emission peaks, respectively at 461 nm and 553 nm. The growth mechanism for the formation of flower‐like CdS structures is also described.     

Selective etching of ZnTe in HF:H2O2:H2O solution: Interpretation of extended defect‐related etch figures

HF:H₂O₂:H₂O solution (40%wt.HF: 30wt.%H₂O₂: H₂O, 3:2:1 by volume) was used to reveal extended defects (line, face and volume defects) in bulk ZnTe crystals grown from Te solution. The etch patterns were analyzed based on their size, shape and distribution. The etch figures, both in the shape of pits and hillocks with high resolution, show forms controlled by the symmetries of the respective faces were produced. Two different sizes of pits were observed, the larger‐size pits correspond to dislocations penetrating the surface, however, the smaller‐size texture pits are produced on the defect‐free region, which serve as standard pits on respect faces. The face defects, such as grain boundaries, sub‐grain boundaries, dislocation walls, twins and stacking faults, can be all displayed clearly. Another essential feature of the etchant is that, it can effectively dissolve Te‐rich phase (Te inclusion/precipitates), which makes it promising to reveal the shape of this volume defect.     

Effect of pH value on the growth morphology of KH2PO4 crystal grown in defined crystallographic direction

KH₂PO₄ single crystals were grown in aqueous solution at different pH values by using “point seeds” with a defined crystallographic direction at 59 degree to the Z axis. Atomic Force Microscope (AFM) was applied to observe the surface morphology of (100) face. It was found that at the same supersaturation, the larger steps appeared at the lower pH value before appearance of 2D nucleus. We found that 2D nucleus was occurred at σ ≤ 0.04 when pH value is <2.8. The occurrence of 2D nucleus was caused by the decreasing step‐edge free energy with the decreasing of pH value in the growth solution. In this paper, we observed the morphologies of (100) faces of KDP crystals which grew in solutions with different pH values. 2D nucleuses appeared on the terrace of growth steps when pH value down to 2.8 and 3.2 at supersaturation of 0.04, while pH value down to 2.4, only 2D nucleation control the growth. Therefore, the pH value can change the growth mechanism of KDP crystals.     

Crystal growth of cyclodextrin‐based metal‐organic framework with inclusion of ferulic acid

The crystallization of γ‐cyclodextrin‐based metal‐organic framework (CD‐MOF) with inclusion of ferulic acid (FA) was carried out through vapor diffusion of methanol to the aqueous solution of γ‐cyclodextrin (γ‐CD), KOH and FA. Although the crystallization of pure CD was limited in highly basic solution of KOH (pH>13.0), the CD‐MOF with inclusion of FA (FA/CD‐MOF) was able to be formed at pH 6.8 after the neutralization of KOH by FA. The inclusion behavior of FA in CD‐MOF was studied by using differential scanning calorimetry. The data indicate the formation of the stable association between FA and γ‐CD in FA/CD‐MOF.     

Single‐crystalline gold microplates grown on substrates by solution‐phase synthesis

Chemically synthesized single‐crystalline gold microplates have been attracting increasing interest because of their potential as high‐quality gold films for nanotechnology. We present the growth of tens of nanometers thick and tens of micrometers large single‐crystalline gold plates directly on solid substrates by solution‐phase synthesis. Compared to microplates deposited on substrates from dispersion phase, substrate‐grown plates exhibit significantly higher quality by avoiding severe small‐particle contamination and aggregation. Substrate‐grown gold plates also open new perspectives to study the growth mechanism via step‐growth and observation cycles of a large number of individual plates. Growth models are proposed to interpret the evolution of thickness, area and shape of the plates. It is found that the plate surface remains smooth after regrowth, implying the applicability of regrowth for producing giant plates as well as unique single‐crystalline nano‐structures.     

Azobenzene‐Functionalized Metal–Organic Polyhedra for the Optically Responsive Capture and Release of Guest Molecules

Stimuli‐responsive metal–organic polyhedra (srMOPs) functionalized with azobenzene showed UV‐irradiation‐induced isomerization from the insoluble trans‐srMOP to the soluble cis‐srMOP, whereas irradiation with blue light reversed this process. Guest molecules were trapped and released upon cis‐to‐trans and trans‐to‐cis isomerization of the srMOPs, respectively. This study provides a new direction in the ever‐diversifying field of MOPs, while laying the groundwork for a new class of optically responsive materials.     

Organozinc Pivalate Reagents: Segregation,Solubility, Stabilization,and Structural Insights

The pivalates RZnOPiv?Mg(OPiv)X?n LiCl (OPiv=pivalate; R=aryl; X=Cl, Br, I) stand out amongst salt‐supported organometallic reagents, because apart from their effectiveness in Negishi cross‐coupling reactions, they show more resistance to attack by moist air than conventional organometallic compounds. Herein a combination of synthesis, coupling applications, X‐ray crystallographic studies, NMR (including DOSY) studies, and ESI mass spectrometric studies provide details of these pivalate reagents in their own right. A p‐tolyl case system shows that in [D₈]THF solution these reagents exist as separated Me(p‐C₆H₄)ZnCl and Mg(OPiv)₂ species. Air exposure tests and X‐ray crystallographic studies indicate that Mg(OPiv)₂ enhances the air stability of aryl zinc species by sequestering H₂O contaminants. Coupling reactions of Me(p‐C₆H₄)ZnX (where X=different salts) with 4‐bromoanisole highlight the importance of the presence of Mg(OPiv)₂. Insight into the role of LiCl in these multicomponent mixtures is provided by the molecular structure of [(THF)₂Li₂(Cl)₂(OPiv)₂Zn].