辉光等离子体辅助化学气相沉积低温合成金刚石薄膜的研究

采用辉光放电等离子体增强化学气相沉积 (GP CVD)技术在低温条件下合成了高品质的亚微米金刚石薄膜 ,并通过对合成过程的实时发射光谱诊断确定了 [CH4 H2 ]系统参与金刚石合成反应的主要荷能粒子。对合成过程的研究表明 :采用这种技术能使电子增强热丝化学气相沉积 (EACVD)合成高品质金刚石薄膜的温度从 85 0℃降至 (340± 5 )℃ ;薄膜低温合成中的主要荷能粒子为CH3 、CH ,CH+ 、H 等 ,其中过饱和原子氢保证了高品质金刚石薄膜的合成 ;根据光诊断和探针测量的结果推断近表面辉光放电可在基片表面形成电偶极层 ,该偶极层是进行超常态反应的必要环境 ,并在低温合成中起重要作用     

金刚石膜厚度尺寸对热残余应力的影响

 采用有限元方法对钼基体上不同厚度（20~1 000 μm）金刚石膜的热残余应力进行了全面的模拟与分析,得出了它们在膜内分布的等值线图,研究了金刚石膜厚度尺寸对整个膜内的最大主拉应力和界面处每个应力分量最大值的影响。结果表明：在整个膜内,最大主拉应力的位置出现在膜的表面、界面或侧面,其值随膜厚度的增加而增大;在界面处,最大轴向应力随膜厚度的增加而增大,而最大径向压应力、最大周向压应力和最大剪应力则随膜厚度的增加而减小,其中最大剪应力减幅较小;膜厚度越大时,以上各量随厚度增（减）的速度越慢。其结论对于在金刚石膜的制备中合理地选择厚度、有效地进行应力控制有一定的参考价值。     

Synthesis and characterization of p-type boron-doped IIb diamond large single crystals

High-quality p-type boron-doped IIb diamond large single crystals are successfully synthesized by the temperature gradient method in a china-type cubic anvil high-pressure apparatus at about 5.5 GPa and 1600 K.The morphologies and surface textures of the synthetic diamond crystals with different boron additive quantities are characterized by using an optical microscope and a scanning electron microscope respectively.The impurities of nitrogen and boron in diamonds are detected by micro Fourier transform infrared technique.The electrical properties including resistivities,Hall coefficients,Hall mobilities and carrier densities of the synthesized samples are measured by a four-point probe and the Hall effect method.The results show that large p-type boron-doped diamond single crystals with few nitrogen impurities have been synthesized.With the increase of quantity of additive boron,some high-index crystal faces such as {113} gradually disappear,and some stripes and triangle pits occur on the crystal surface.This work is helpful for the further research and application of boron-doped semiconductor diamond.     

同质与异质外延掺杂CVD金刚石薄膜的结构与性能

采用化学气相沉积(CVD)技术,以高温高压(HTHP)合成的(100)金刚石和p型(100)Si为衬底制备了硫掺杂和硼-硫共掺杂金刚石薄膜,利用原子力显微镜(AFM)、扫描隧道显微镜(STM)及隧道电流谱(CITS)等手段分析同质和异质外延CVD掺杂金刚石薄膜的结构和性能.结果表明:异Si衬底上CVD金刚石的形核密度低,薄膜表面比较粗糙,粗糙度达到18.5nm;同质HTHP金刚石衬底上CVD金刚石薄膜晶粒尺寸约为10—50nm,表面平整,表面粗糙度为1.8nm.拉曼测试和电阻测量的结果显示,在HTHP金刚 关键词： 金刚石 掺杂 外延     

Preparation and tribological properties of DLC/Ti filmby pulsed laser arc deposition

This paper reports that DLC (diamond like carbon)/Ti and DLC films were prepared by using pulsed laser arc deposition. R-ray diffraction, Auger electron spectroscopy, Raman spectroscopy, atomic force microscopy, nanoindenter, spectroscopic ellipsometer, surface profiler and micro-tribometer were employed to study the structure and tribological properties of DLC/Ti and DLC films. The results show that DLC/Ti film, with $I(D)/I(G)$ 0.28 and corresponding to 76{\%} sp$^{3}$ content calculated by Raman spectroscopy, uniform chemical composition along depth direction, 98 at{\%} content of carbon, hardness 8.2 GPa and Young's modulus 110.5 GPa, compressive stress 6.579 GPa, thickness 46~nm, coefficient of friction 0.08, and critical load 95mN, exhibits excellent mechanical and tribological properties.     

基于人造金刚石晶体的拉曼激光器研究进展

受激拉曼散射是一种重要的非线性光学频率变换技术,在拓展激光波段方面有十分广泛的应用前景。因此,寻找具有优良光学性质的拉曼介质,提高拉曼激光器性能,具有重要的研究价值。相比于传统的固体拉曼晶体,人造金刚石晶体具有拉曼增益系数大、拉曼频移大、导热率高和透过性好等显著优点,基于人造金刚石晶体的拉曼激光器能够获得更高的输出功率和转换效率。本文简要介绍了化学气相沉积法(CVD)制备的金刚石晶体的光学性质和热学特性,总结了基于人造金刚石晶体的拉曼激光器在紫外波段、可见光波段及红外波段的研究现状,并对其发展进行了展望。     

Effects of a carbon convection field on large diamond growth under high-pressure high-temperature conditions

Large diamond crystals were successfully synthesized by a FeNi-C system using the temperature gradient method under high-pressure high-temperature conditions. The assembly of the growth cell was improved and the growth process of diamond was investigated. Effects of the symmetry of the carbon convection field around the growing diamond crystal were investigated systematically by adjusting the position of the seed crystal in the melted catalyst/solvent. The results indicate that the morphologies and metal inclusion distributions of the synthetic diamond crystals vary obviously in both symmetric and non-symmetric carbon convection fields with temperature. Moreover, the finite element method was applied to analyze the carbon convection mode of the melted catalyst/solvent around the diamond crystal. This work is helpful for understanding the growth mechanism of diamond.     

自旋为1/2的XY模型亚铁磁棱型链的物性和有序-无序竞争

利用不变本征算符法, 计算低温下自旋为1/2的XY模型一维亚铁磁棱型链系统的元激发谱, 讨论在此系统中不同的特殊情形下的元激发能量, 从而给出体系的三个临界磁场强度的解析解H_C1, H_C2, H_peak. 分析不同外磁场下 体系的磁化强度随温度的变化规律, 发现三个临界磁场强度的解析解H_C1, H_C2, H_peak是正确的, 并从三个元激发对磁化强度的贡献进行了说明. 低温下磁化强度随外磁场的变化呈现1/3磁化平台. 体系的磁化率随温度或者外磁场的变化都出现了双峰现象. 这说明双峰源于二聚体分子内电子自旋平行排列的铁磁交换作 用能和二聚体与单基体分子间电子自旋反平行排列的反铁磁交换作用能, 热无序能, 外磁场强度相关的自旋磁矩势能之间的竞争.     

金刚石对顶砧原位电导率测量系统

 在金刚石对顶砧中进行原位高温高压电阻测量时,由于受到绝热层的限制,从而达不到理想的温度条件。采用普通的粉末绝热材料,会给电极的引入造成很大困难,而且不规则的电阻丝使电阻测量很难精确量化。利用溅射镀膜方法,在对顶砧的砧面上镀氧化铝膜作绝热层,溅射的金属钼膜作电极材料,成功地完成了高温高压条件下原位电阻的测量。利用此装置,测量了铁镁硅酸盐(Mg_0.875,Fe_0.125)₂SiO₄在高温高压环境下（31~35 GPa,1 500~3 400 K）的电导率,得到了样品的导电粒子激活能,发现其激活能随着压强的升高而增大,与低压低温（小于15 GPa,低于1 200 K）条件相比,其激活体积和激活能都明显减小。     

用甲醇－氢混合气源在不锈钢上生长金刚石薄膜的研究

利用甲醇－氢（ＣＨ３ＯＨ－Ｈ２）混合气体为气源，３０ｎｍ厚的无定形硅为过渡层，借助于微波等离子体化学气相沉积（ＭＷＣＶＤ）成功地将金刚石薄膜生长在不锈钢上，其最低生长温度可至４２０℃，并且甲醇－氢混合气体比传统的甲烷－氢（ＣＨ４－Ｈ２）更具优势，测试表明这种金刚石薄膜有希望作为耐磨层在工业上应用