Influence of isomerism of difluorobenzophenone on the synthesis and properties of poly(arylene ether ketones)

The influence of isomerism of difluorobenzophenone on the efficiency of polycondensation and the properties of homo- and copoly(arylene ether ketones) was studied. The latter were prepared by the reaction of 2,4"- and 4,4"-difluorobenzophenone with potassium diphenolates of bisphenol À and phenolphthalein in N,N-dimethylacetamide. A high content of an admixture of the 2,4"-isomer in 4,4"-difluorobenzophenone decreases the molecular weight of related poly(arylene ether ketones) and has no substantial effect on their glass transition temperature.     

An electrochemical interpretation of the mechanism of the chemical decarboxylation of 6-carboxyperhydropyrimidin-4-ones

The present work analyzes the anodic oxidation of the tetrabutylammonium salt of 1-benzoyl-2(S)-tert-butyl-6(S)-carboxyperhydropyrimidin-4-one, which is a useful starting material in the synthesis of enantiopure α-substituted β-amino acids. It was demonstrated that in CH₂Cl₂ solvent, the anodic oxidation reaction results in fast and complete decarboxylation, followed by proton elimination thereby leading to the same product of chemical (diacetoxyiodobenzene) oxidative decarboxylation. The electrochemical mechanism involves two electron transfer steps, but appears as a monoelectronic process owing to the release of one proton from the key acyliminium carbocation intermediate. The relative stability of this intermediate and the suppression of any solvolysis reaction in CH₂Cl₂ allow for the detection of the acyliminium intermediate by means of cyclic voltammetry experiments. By contrast, in the presence of a nucleophilic solvent such as acetonitrile, the acyliminium intermediate is trapped in a typical Ritter reaction.     

Oxidative and Photochemical Stability of Ionomers for Fuel‐Cell Membranes

To predict hydroxyl‐radical‐initiated degradation of new proton‐conducting polymer membranes based on sulfonated polyetherketones (PEK) and polysulfones (PSU), three nonfluorinated aromatics are chosen as model compounds for EPR experiments, aiming at the identification of products of HO^.‐radical reactions with these monomers. Photolysis of H₂O₂ was chosen as the source of HO^. radicals. To distinguish HO^.‐radical attack from direct photolysis of the monomers, experiments were carried out in the presence and absence of H₂O₂. A detailed investigation of the pH dependence was performed for 4,4′‐sulfonylbis[phenol] ( SBP ), bisphenol A (= 4,4′‐isopropylidenebis[phenol]; BPA ), and [1,1′‐biphenyl]‐4,4′‐diol ( BPD ). At pH ≥ pK_A of HO^. and H₂O₂, reactions between the model compounds and O₂^.? or ¹O₂ are the most probable ways to the phenoxy and ‘semiquinone’ radicals observed in this pH range in our EPR spectra. A large number of new radicals give evidence of multiple hydroxylation of the aromatic rings. Investigations at low pH are particularly relevant for understanding degradation in polymer‐electrolyte fuel cells (PEFCs). However, the chemistry depends strongly on pH, a fact that is highly significant in view of possible pH inhomogeneities in fuel cells at high currents. It is shown that also direct photolysis of the monomers leads to ‘semiquinone’‐type radicals. For SBP and BPA , this involves cleavage of a C? C bond.     

Application of stress induces ascorbate peroxidases of S. polyrhiza for green-synthesis Cu nanoparticles

The objective of this study was to assess the effects of stress on physiology/biochemical component of S. polyrhiza and its impact on CuNPs synthesis and bioethanol production. NaCl with RV5 provokes oxidative stress in S. polyrhiza and significantly increase MAD, Proline, H₂O₂, ROS, SOD and APX activity compare to control condition. Starch accumulation in S. polyrhiza was found 354% higher and correspond 4.4 times higher ethanol yield under stress condition compare to control. CuNPs were synthesized with an average size of 23–26 nm by purified fraction of APX having 37 KDa MW, 1.44 IU specific activity. Synthesized CuNPs were stable up to 15 consecutive cycles and potency against wide range of reactive dyes. The maximum remedial efficiency of synthesized CuNPs for COD and BOD was 55263.3 ± 3298.5 mg/m³min. and 30560.3 ± 1987.5 mg/m³min. respectively for RV5 wastewater. 0.072 mg/g of bioethanol was produced from the wet pulp remaining after nanoparticles synthesis. High efficiency of CuNPs and significant production of Ethanol, indicate that the feasibility for circular model for continuous industrial wastewater treatment.     

Manganese(III) acetate based oxidative cyclizations of 3-oxopropanenitriles with conjugated alkenes and synthesis of 4,5-dihydrofuran-3-carbonitriles containing heterocycles

4,5-Dihydrofuran-3-carbonitriles 3a-i were obtained through oxidative cyclizations of 3-oxo-3-phenylpropanenitrile 1a, 3-oxo-3-thien-2-ylpropanenitrile 1b, 3-(2-furyl)-3-oxopropanenitirle 1c, 3-(1-benzofuran-2-yl)-3-oxopropanenitrile 1d, and 4,4-dimethyl-3-oxopropanenitrile 1e mediated manganese(III) acetate with 1,1-diphenyl-1-butene 2a and 1,2-diphenyl-1-pentene 2b. The treatments of these 3-oxopropanenitriles with 2-thienyl substituted alkenes such as 2-[(E)-2-phenylvinyl]thiophene 2c, 2-[(E)-1-methyl-2-phenylvinyl]thiophene 2d, and 2-(1-phenylvinyl)thiophene 2e formed 5-(2-thienyl)-4,5-dihydrofuran-3-carbonitriles 3j-r in good yields (45-93%). As a result, 2-thienyl substituted alkenes formed products in higher yields than phenyl substituted derivatives.     

Electroactive polyimide with oligoaniline in the main chain via oxidative coupling polymerization

By oxidative coupling polymerization of the imidic macromonomer of oligoaniline and p-phenylenediamine we have prepared an electroactive polyimide, exhibiting exciting molecular structure, electrochemical properties and excellent thermal stability. The polymerization characteristics and structure of the electroactive polyimide were systematically studied by Fourier-transform infrared (FTIR) spectra and X-ray powder diffraction (XRD). Electrochemical activity of the polyimide was tested in 1.0 M H₂SO₄ aqueous solution and it shows two redox peaks, which is the same as that of polyaniline. Moreover, the thermal properties of the polyimide were evaluated by thermogravimetric analysis (TGA). Its electrical conductivity is about 8.87 × 10⁻⁶ S cm⁻¹ at room temperature upon preliminarily protonic-doped experiment.     

A new synthetic method for the 2H-[1,2,3]thiadiazolo[5,4-b]indoles

The systematic study of oxidative cyclization of 3-hydrazono-1,3-dihydroindole-2-thiones has been carried out and a series of new 2H-[1,2,3]thiadiazolo[5,4-b]indoles has been prepared. The elaborated reaction represents an efficient method for the synthesis of fused 1,2,3-thiadiazoles.     

Oxidative cyclization of 3-oxopropanenitriles with α,β-unsaturated amides by manganese(III) acetate. Regio- and stereoselective synthesis of 4-cyano-2,3-dihydrofuran-3-carboxamides

4-Cyano-2,3-dihydrofuran-3-carboxamides were obtained from the oxidative cyclization of 3-oxopropanenitriles with unsaturated amides using manganese(III) acetate. Treatment of 3-oxopropanenitriles with (2E)-3-(5-methyl-2-furyl)acrylamide and (2E)-3-(2-thienyl)acrylamide gave 2-(5-methyl-2-furyl) and 2-(2-thienyl) substituted 4-cyano-2,3-dihydrofuran-3-carboxamides in moderate yields, respectively. However, (2E)-3-(2-furyl)acrylamide and (2E)-3-phenylacrylamide did not produce any product under the same conditions. On the other hand, reaction of a dienamide such as (2E,4E)-5-phenylpenta-2,4-dienamide with 3-oxopropanenitriles gave diastereomeric mixtures of 2-(2-vinylphenyl)-4-cyano-2,3-dihydrofuran-3-carboxamides. Mechanisms are proposed for the formation of all of these compounds.     

New poly (amide-imide) syntheses. IX. Preparation and properties of poly(amide-imide)s derived from 2,7-bis (4-aminophenoxy) naphthalene and various bis (trimellitimide)s

Eleven bis(phenoxy) naphthalene-containing poly(amide-imide)s IIIa–k were synthesized by the direct polycondensation of 2,7-bis (4-aminophenoxy) naphthalene (DAPON) with various aromatic bis (trimellitimide)s IIa–k in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Poly (amide-imide)s IIIa–k having inherent viscosities of 0.70–1.12 dL/g were obtained in quantitative yields. The polymers containing p-phenylene or bis(phenoxy) benzene units exhibited crystalline x-ray diffraction patterns. Most of the polymers were readily soluble in various solvents such as NMP, N, N-dimethylacetamide, dimethyl sulfoxide, m-cresol, o-chlorophenol, and pyridine, and gave transparent, and flexible films cast from DMAc solutions. Cast films showed obvious yield points in the stress-strain curves and had strength at break up to 87 MPa, elongation to break up to 11%, and initial modulus up to 2.10 GPa. These poly(amide-imide)s had glass transition temperatures in the range of 255–321°C, and the 10% weight loss temperatures were recorded in the range of 529–586°C in nitrogen. The properties of poly(amideimide)s IIIa–k were compared with those of the corresponding isomeric poly (amide-imide)s III′ prepared from 2,7-bis(4-trimellitimidophenoxy) naphthalene and aromatic diamines. © 1994 John Wiley & Sons, Inc.     

Synthesis and properties of novel aromatic polyamides derived from 1,5-bis(4-aminophenoxy)naphthalene and aromatic dicarboxylic acids

A new bis(phenoxy)naphthalene-containing diamine, 1,5-bis(4-aminophenoxy)naphthalene, was synthesized in two steps from the condensation of 1,5-dihydroxy-naphthalene with p-chloronitrobenzene in the presence of potassium carbonate, giving 1,5-bis(4-nitrophenoxy)naphthalene, followed by hydrazine hydrate/Pd? C reduction. A series of polyamides and copolyamides were synthesized by the direct polycondensation of the diamine with various aromatic dicarboxylic acids or with mixed dicarboxylic acids in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. The polymers having inherent viscosity of 0.81–1.25 dL/g were obtained in quantitative yield. Most of the polymers were generally soluble in aprotic solvent such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, etc. The polymers derived from rigid dicarboxylic acids such as terephthalic acid, naphthalene dicarboxylic acid, and 4,4′-biphenyldicarboxylic acid exhibited crystalline patterns. Glass transition temperatures of polymers were in the range of 230–360°C, and 10% weight loss temperatures in nitrogen and air were above 492 and 470°C, respectively. © 1993 John Wiley & Sons, Inc.