Structural,optical and microwave dielectric properties of Ba1−xSrxWO4 ceramics prepared by solid state reaction route

In this paper, Barium Strontium Tungstate (Ba_1−xSr_x)WO₄ crystals with (x = 0; 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9 and 1.0) were prepared by standard wet milling ceramic preparation method. These crystals were structurally characterized by X-ray diffraction (XRD), Fourier transform Raman (FT-Raman) and Fourier transform infrared (FT-IR) spectroscopic techniques. The shape, growth and average crystal size distribution of these crystals were investigated by a scanning electron microscope (SEM). Their optical properties were investigated by ultraviolet visible (UV–vis) absorption and photoluminescence (PL) measurements. XRD patterns, Rietveld refinements data, FT-Raman and FT-IR spectroscopies indicate that all the crystals present a scheelite-type tetragonal structure without deleterious phases. FT-Raman spectra exhibited 6 Raman active modes in range from 100 to 1000 cm⁻¹, while the FT-IR spectra presented 2 infrared active modes in range from 500 to 1000 cm⁻¹. SEM micrographs showed well sintered BaWO₄ grains, while the substitution of Sr induced modifications in the shape and reduction in the grain size. UV–vis absorption measurements evidenced an increase in the values of the optical band gap (from 4.36 to 4.53 eV) with the increase of Sr into BaWO₄ lattice. Dielectric constant, temperature coefficient of resonant frequency (τ_f), quality factors were measured with Hakki–Coleman technique. The value of τ_f found −43.68 ppm/°C for BaWO₄ which increased to −21.40 ppm/°C for the SrWO₄.     

Structural and optical characterization of CdS nanoparticles prepared by chemical precipitation method

In the present study we have synthesized CdS semiconducting quantum dots by the chemical precipitation method using Thioglycerol as the capping agent. X-ray powder diffraction (XRD) and transmission electron microscopy (TEM) are employed to characterize the size, morphology and crystalline structure of the as-prepared material. The synthesized QPs have a mixture of cubical and hexagonal crystal symmetry with 12 nm average diameter. Ultraviolet-visible (UV-vis) absorption spectroscopy is used to calculate the band gap of the material and blue shift in absorption edge. Confinement of the optical phonon modes in the QPs is studied by Raman spectroscopy, while FTIR for identification of chemical bonds in the nanomaterial. Multiple cadmium and sulphur defects were observed by employing the photoluminescence (PL) method.     

Improvement of hydrophilic properties of electrospun polyamide-imide fibrous mats by atmospheric-pressure plasma treatment

Polyamide-imide (PAI) fibrous mats were fabricated through electrospinning and further treated with atmospheric-pressure plasma. The surface characteristics of the PAI fibrous mats were examined to determine the effect of plasma treatment on the hydrophilic properties. FT-IR, X-ray photoelectron spectroscopy, and contact-angle analysis indicated that the hydrophilicity of the PAI fibrous mats increased upon the introduction of hydrophilic groups by plasma treatment. The concentration of functional groups, including oxygen, and the surface roughness of the PAI fibrous mats increased with increasing treatment time. The optimum plasma treatment time for surface modification of the PAI fibrous mats under atmospheric pressure was 120 s.     

EPR,ENDOR and optical spectroscopy of Yb3+ ion in KZnF3 single crystals

The paramagnetic center of tetragonal symmetry formed by the Yb³⁺ ion in the KZnF₃ crystal has been studied using methods of EPR, ENDOR and optical spectroscopy. The location of the impurity ion and the structural model of the complex differing from the model of the Yb³⁺ center in KMgF₃ have been established. The empirical scheme of the energy levels of the Yb³⁺ ion has been found. The parameters of its interaction with the crystal electrostatic field and the hyperfine interaction with ligands of the nearest environment have been determined. The parameters of the crystal field were used for the analysis of the distortions of the crystal lattice in the vicinity of Yb³⁺. The parameters of the transferred hyperfine interaction have been calculated for the distances between Yb³⁺ and F⁻ ions of the nearest environment obtained taking into account the found distortions. They are in good agreement with the experimental values.     

Exploring Microstructures and Interphase Properties of Surface- Grafted Diblock Copolymers in a Homopolymer Melt by Self-Consistent Field Theory Simulations

Polymeric self-consistent field theory is used to investigate microstructures and interphase properties of diblock copolymers grafted onto solid surfaces in a homopolymer melt. The calculations show that the grafted diblock copolymers can self-assemble into hemispherical microstructures at low grafting densities of the diblock copolymers. The morphology transforms into hemicylinder-like and sandwich-like lamellar microstructures with an increase in the chain-grafting density. The effective thickness of the grafted block layer and the interphase width between the homopolymer melt and the grafted copolymers strongly depend on the physicochemical parameters of the system, such as the composition of the grafted copolymer, the chemical incompatibility between the different components, the length ratio of grafted copolymer to homopolymer, and the grafting density of the diblock copolymers. In addition, the above computational results of microphase-separated structures and interphase properties are qualitatively compared with our previous experimental observations. The comparison indicates that our theoretical results not only reproduce the general feature of the experimental observations, but also elucidate the internal structural information and complement the findings in the region of high grafting densities of diblock copolymers.     

Enhanced depolarization temperature in 0.90NBT–0.05KBT–0.05BT ceramics induced by BT nanowires

The depolarization temperature (T_d) of piezoelectric materials is an important figure of merit for their application at elevated temperatures. This study focuses on the effect of BaTiO₃ (BT) nanowires on T_d and piezoelectric properties of morphotropic-phase-boundary 0.90NBT–0.05KBT–0.05BT ceramics. The results reveal that BaTiO₃ nanowires can pin the domain wall, leading to the increase of coercive field (E_c) from 21.06 kV/cm to 34.99 kV/cm. The T_d value of 0.90NBT–0.05KBT–0.05BT ceramics can be enhanced approximately 20 °C when using BT nanowires instead of BT solution as the raw material. Meanwhile, at the same polarization conditions, the piezoelectric constant of the ceramic added BT nanowires (172 pC/N) is decreased but still remains a larger value compared with those of other lead-free ceramics. The results imply that the addition of BT nanowires into NBT–KBT is a very effective route to improve T_d.     

Addendum to “Switching effect and the metal–insulator transition in electric field” by A.L. Pergament et al. [J. Phys. Chem. Solids 71 (2010) 874]

In the paper mentioned above we reported on the switching mechanism in vanadium dioxide which was shown to be based on the electronically-induced Mott insulator-to-metal transition occurring in conditions of the non-equilibrium carrier density excess in the applied electric field, and the proposed model involved the dependence of the carrier density n on electric field (the Poole–Frenkel effect), as well as the dependence of the critical electric field on n. The data on the n(T) dependence were obtained on the assumption of a temperature-independent carrier mobility μ, and the problem of n reduction at lower temperatures was not fully understood. In this Letter we revisit this problem in the light of some recent data on the μ(T) dependence for VO₂. It is shown that the adjusted values of n, taking into account this μ(T), correspond to the Mott critical density within an order of magnitude.     

Mobility as controlled by the transverse component of phonon wave vector in quantum layers at low temperatures

Without resorting to either the Kawaji’s simplified model of interaction with only two-dimensional phonons or to the equipartition approximation for the phonon distribution, the characteristics of the momentum relaxation time of the conduction electrons in a quantized surface layer for interaction with intravalley acoustic phonons have been analysed under the condition of low temperature. The scattering and the mobility characteristics thus obtained for an n-channel (1 0 0)-oriented Si inversion layer are apparently quite different from what follows in the traditional framework.     

An Investigation of the Effect of Semi-Acetal Formation on the Properties of Dialdehyde Starch and its Thermoplastic Blend with Glycerol

Dialdehyde sweet potato starch (DASS) with various aldehyde contents was prepared and the properties analyzed in terms of solubility, intrinsic viscosity, scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The results demonstrated that when the aldehyede content of DASS was increased from 20% to 95%, the solubility, molecular weight, crystallizability, and thermal stability decreased. Thermoplastic DASS (TPDASS) was prepared by adding glycerol as a plasticizer; the thermal, rheological, hydrophobic, and tensile properties of TPDASS were investigated. The results indicated that, for the same glycerol content, with the increase of aldehyde content, the moisture adsorption decreased, while the shear viscosity, glass transition temperature, and tensile properties of TPDASS increased significantly. The effects were attributed to the introduction of aldehyde groups reducing the hydrogen bonds and decreasing the hydrophility of the starch. Moreover, the aldehyde and hydroxyl groups of DASS favored a semi-acetal formation with higher aldehyde content and cross-linking of DASS occurred with the increase of aldehyde content. In summary, compared to starch, the thermoplastic properties and hydrophobicity of DASS was improved. In the presence of water (10 wt%), the tensile strength of TPDASS with 95% aldehyde content (TPDASS95) moderately decreased, from 16.7 MPa to 14.0 MPa, when the glycerol content increased from 10% to 30%. The TPDASS with improved properties will find their applications in preparing biodegradable plastics.     

Antibacterial and Miscibility Properties of Chitosan/Collagen Blends

The miscibility, bioactivity, and antibacterial properties of chitosan/collagen specimens were systematically studied. The specimens were prepared by blending collagen and chitosan with varying deacetylation degrees in solutions; the collagen molecules had been extracted from pigskins using the acid swelling-pepsin digestion method. To understand the miscibility properties of collagen and chitosan molecules, the intrinsic viscosity and differential scanning calorimetry analysis of collagen, chitosan, and collagen/chitosan specimens were performed. The instrinsic viscosity measurements suggested that chitosan and collagen molecules with varying deacetylation degrees were miscible at molecular level for all compositions and degrees of deacetylation of chitosan/collagen mixture solutions prepared in this study. Fourier transform infrared analyses suggested that the percentage of preserved triple helix structures present in collagen molecules in collagen/chitosan specimens decreased with increasing chitosan contents, since the ratios of peak absorbance at 1239 cm^?1 of amide III and 1455 cm^?1 of C?H bending of collagen/chitosan specimens decreased significantly with increase in their chitosan contents. Abnormally high denaturation temperatures (T_d) were observed as the chitosan contents of collagen/chitosan specimens reached 40 wt%, at which T_d of collagen molecules was even higher than that of the corresponding pure chitosan molecules with varying deacetylation degrees. The antibacterial activity of collagen/chitosan blends increased consistently with increasing deacetylation degrees and concentrations of chitosan molecules in collagen/chitosan solutions. Possible explanations for these interesting thermal denaturation, antibacterial, and miscibility properties of chitosan/collagen specimens are reported.