Effects of polystyrene-encapsulated magnesium hydroxide on rheological and flame-retarding properties of HIPS composites

In this study, polystyrene (PS)-encapsulated magnesium hydroxide (Mg(OH)₂) was successfully prepared by in situ polymerization of styrene on the surface of Mg(OH)₂ in a high-speed mixer. A large amount of PS chemically bonded on Mg(OH)₂ surface was confirmed by means of FT-IR, TGA and SEM. A series of composites of high impact polystyrene (HIPS) were prepared by melt blending in a co-rotating twin-screw extruder. The effects of PS-encapsulated filler on the properties of HIPS composites were studied by SEM, rheology and combustion tests (horizontal burning tests and cone calorimetry). The dispersion and adhesion patterns of PS-encapsulated Mg(OH)₂ in HIPS matrix were investigated through FT-IR and SEM. The experimental results demonstrated that comparing to the composites containing untreated filler, the rheological and flame retardant properties of those containing PS-encapsulated filler were found to be significantly improved. This improvement is mostly attributed to a better dispersion of the encapsulated filler and a strong adhesion between the filler and matrix.     

氧化锰团簇粒子在有序多孔氧化锆孔道中的组装及其特殊性能研究

利用醇溶液浸渍法及后续的热处理工艺成功实现了氧化锰团簇粒子在有序多孔氧化锆孔道中的组装，借助XRD，TEM，UV-vis，EPR以及O~2-TPD等分析手段进行样品结构表征及性能分析。研究表明，氧化锰团簇粒子能比较均匀地分散于规则的孔道中；团簇粒子的生长随着热处理温度的提高受到孔道大小的限制；孔道中的氧化锰团簇粒子能显示出与较大尺寸氧化锰粒子完全不同的强顺磁信号，并且还具有优异的表面氧吸附特性。     

Thermodynamic properties of lithium chloride ammonia complexes for application inahigh-lifthigh temperature chemical heat pump

Ammonia absorption by and desorption from lithium chloride at different pressures has been studied using high-pressure differential scanning calorimetry, for application in a high-lift high temperature chemical heat pump. The measurements were performed under isobaric as well as under isothermal circumstances. Clausius–Clapeyron plots were constructed and used to calculate the thermodynamic parameters and to determine the stability regions of the different complexes. Controversies in literature as to the real existing phases are resolved.     

Tetrakis(thiadiazolo)porphyrazines. 3. Acid-base Properties and Stability of Tetrakis-3,4-(1,2,5-thiadiazolo)porphyrazine in Sulfuric Acid Solutions

AM1 calculations gave the proton affinities of different types of donor sites in tetrakis-3,4-(1,2,5-thiadiazolo)porphyrazine, H₂{[SN₂)₄PA}, and protonation of the meso-nitrogen atoms was found to be favored. A spectrometric study showed that the basicity of the meso-nitrogen atoms of the porphyrazine macrocycle is strongly diminished and these atoms in CF₃CO₂H are involved in an incomplete acid-base interaction (ABI) to give acid solvates, while a complete ABI (protonation) is found only in the presence of sulfuric acid. The basicity constants of the meso-nitrogen atoms were determined spectrophotometrically in CF₃CO₂H-H₂SO₄. The kinetics of decomposition of the macrocyclic chromophore in concentrated sulfuric acid was studied and a possible mechanism for this process was proposed.__________Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 278–287, February, 2005.     

Effect of cerium, holmium and samarium ions on the thermal and structural properties of the HZSM-12 zeolite

The study of the incorporation of rare earth elements as additives in Y zeolites is a very interesting field of research, mainly by its potential application as additives in catalytic cracking process. In this work was studied the thermal and structural properties of cerium, holmium and samarium supported on HZSM-12 zeolite. The obtained materials were characterized by X-ray diffraction (XRD), infrared spectroscopy (FTIR), nitrogen adsorption, thermogravimetry (TG/DTG), differential scanning calorimetry (DSC) and differential thermal analysis (DTA). TG/DSC/DTA analyses showed that the dehydration temperatures of RE/HZSM-12 zeolites (RE=Ce, Ho, Sm) increase in relation to pure HZSM-12. The acid properties were investigated by pyridine thermo desorption via TG. The results showed two events of mass loss attributed to elimination of pyridine adsorbed on the weak+medium acid sites and on the strong acid sites.     

New integrated measurement protocol using capillary electrophoresis instrumentation for the determination of viscosity, conductivity and absorbance of ionic liquid-molecular solvent mixtures

The low vapor pressure and the versatility of the physico-chemical properties of ionic liquids make them really attractive as an alternative for conventional molecular solvents. The knowledge of their physico-chemical properties (viscosity, conductivity, miscibility with organic solvents and anion-cation interactions) has appeared mandatory for better targeting their applications, although it is generally still lacking or incomplete.This work promotes capillary electrophoresis instrumentation as an integrated apparatus for measurement of viscosity, conductivity and absorbance of pure ionic liquids and ionic liquid-molecular solvent mixtures. Compared to current conventional techniques, the assets of this instrumentation for this purpose are the combined availability of a pressure delivery system, power supply, diode array absorbance detector and thermoregulation device, allowing unattended, automatic and easy operation, involving minimum sample handling. Most importantly, the required sample volume can be reduced to about 50 μL, making this protocol very cost-effective. A protocol was optimized with respect to time, sample consumption and data reliability for the determination of these physico-chemical parameters. Ionic liquids selected for method development and validation differed in the nature of their cation (butyl- and ethyl-methylimidazolium) and anion (trifluoromethanesulfonate and bis(trifluoromethanesulfonyl)imide). Various molecular solvents were mixed with these ionic liquids (acetonitrile, methanol, dimethylformamide and trifluoroethanol) and the same physico-chemical properties were determined by optimized methods. The knowledge of these data should be of great support in various application areas, including the development of new separation media for capillary electrophoresis and chromatographic techniques.     

The combined effect of photodegradation and stress cracking in polystyrene

This work aims to analyze the effects of photodegradation on the stress cracking resistance of polystyrene. Injection moulded samples were exposed to the ultraviolet light for various times in the laboratory prior to solvent contact. The bars were then stressed in a tensile testing machine under the presence of butanol. During this period the stress relaxation was monitored and the ultimate properties were evaluated after selected periods of stress cracking. Complementary tests were done by size exclusion chromatography and by scanning electron microscopy. The results indicated that butanol causes significant modification in polystyrene, with extensive surface crazing as well as reduction in mechanical properties. This is intensified under higher mechanical stress. The previous degraded samples showed a higher level of stress relaxation and a greater loss in tensile strength in comparison to the undegraded ones. The synergist action of photodegradation and stress cracking in polystyrene may be a consequence of the chemical changes caused by oxidation like the formation of polar chemical groups and the reduction in molecular weight.     

碘掺杂的3-乙基-5-[2-(3-乙基-2苯并噻唑啉基)亚乙基]罗丹宁的结构与电性能

The merocyanine dye 3-ethyl-5-(2-(3-ethyl-2-benzothiazolinylidene)-ethylidene)-rhodanine (BTER) known as Agfa-10 has been found to have a good photoconductivity as solution cast film. In this paper iodine-doped BTER was obtained by doping with iodine vapor. Its structure was investigated with the following characteristies. 1 The doped iodine had been excited as I_3~- anion. 2 Because the electron located on the sulphur atom was transferred to iodine, the charge transfer complex of (BTER-I_3) formed. 3 During the iodine doping process, BTER changed from α-form to β-modification. These had been identified by X-ray diffraction, VIS-absorption spectra and SEM picture.4 From the volt-Ampere curve obtained from sandwich cell, when E≤2.2×10~(-1) V·cm~(-1), the room temperature electrical conductivity of BTER and BTER-I_3 were found to be 2.22×10~(-10) s·cm~(-1) and 2.6×10~(-7) S·cm~(-1), respectively.     

Circular dichroism of sesquiterpene-umbelliferone ethers and structure elucidation of a new derivative isolated from the gum resin “Asa Foetida”

The CD spectra of 16 naturally occurring sesquiterpene-umbelliferone ethers, including the complete set of farnesiferol A isomers with all acetates and 6-oxoderivatives, are reported over the significant wavelength range of 350–200 nm. 11 compounds were isolated from an Asa Foetida sample and 5 further derivatives, already known as natural products, were obtained by acetylation orJones oxidation. In addition, a new compound — kamolonol (14) — was isolated. Its structure is characterized by twofold methyl migration in the drimenol derived sesquiterpene moiety.¹H-NMR, MS, IR, UV, and CD data of the new compound are discussed.Herrn Prof. Dr.K. Schlögl mit den besten Wünschen zum 60. Geburtstag gewidmet.     

Preparation and properties of polyurethane networks based on α,ω-difunctional poly(hexafluoropropylene oxide)

Poly(hexafluoropropylene oxide), poly(HFPO), networks were prepared from functional polymers by end linking via urethane groups. The prepolymers were characterized by NMR spectroscopy and GPC. The networks were characterized by determination of the number of network chains from the shear modulus, and were snown to contain both trifunctional crosslinks and difunctional links. The properties of the networks were investigated by a range of techniques. Compared with fully-fluorinated networks formed via triazine cross-links, investigated previously, the urethane-linked networks were more readily prepared but were poorer elastomers, were less thermally stable, and were less resistant to swelling by common polar solvents. © 1995 John Wiley & Sons, Inc.