Structure and Magnetic Properties of Nickel–Zinc Ferrite Nanoparticles Prepared by Glass Crystallization Method

Summary. The magnetic and microstructure properties of Fe₂O₃–0.4NiO–0.6ZnO–B₂O₃ glass system, which was subjected to heat treatment in order to induce a magnetic crystalline phase (Ni_0.4Zn_0.6-Fe₂O₄ crystals) within the glass matrix, were investigated. DSC measurement was performed to reveal the crystallization temperature of the prepared glass sample. The obtained samples, produced by heat treatment at 765°C for various times (1, 1.5, 2, and 3 h), were characterized by X-ray diffraction, IR spectra, transmission electron microscopy, and vibrating sample magnetometer. The results indicated the formation of spinel Ni–Zn ferrite in the glass matrix. Particles of the ferrite with sizes ranging from 28 to 120 nm depending on the sintering time were observed. The coercivity values for different heat-treatment samples were found to be in the range from 15.2 to 100 Oe. The combination of zinc content and sintering times leads to samples with saturation magnetization ranging from 12.25 to 17.82 emu/g.     

Two new tetranuclear complexes of the macrocyclic oxamide [MCu3] (M = Cd, Mn, macrocyclic oxamide = 1,4,8,11-tetraazacyclotradecanne-2,3-dione): syntheses, spectra and magnetic properties

Two new tetranuclear complexes of macrocyclic oxamide [Cd(CuL)₃](NO₃)₂·2.5H₂O 1, [Mn(CuL)₃(OH)₂](ClO₄)₂·Mn(H₂O)₆·4.5H₂O 2 (L = 1,4,8,11-tatraazacyclotradecanne-2,3-dione) have been synthesized, structurally characterized and preliminary investigated by magnetic studies. The structures of the title complexes consist of a tetranuclear units MCu₃ (M = Cd, Mn), the packing diagram shows two-dimensional and three-dimensional system through intermolecular weak interactions. The temperature-dependent magnetic susceptibilities of complex 2 were analyzed by an approximate treatment leading to J = −33 cm⁻¹, g_Cu = 2.10, g_Mn = 1.95 indicating antiferromagnetic exchange between Cu(II) and Mn(II) ions.     

Characterization and electrochemical investigation of boron-doped mesocarbon microbead anode materials for lithium ion batteries

The structure and anodic performance of boron-doped and undoped mesocarbon microbeads (MCMBs) have been comparatively studied and the results obtained by XPS, XRD, SEM, Raman spectroscopy and electrochemical measurements are discussed. It is found that boron doping introduces a depressed d ₀₀₂ spacing and the larger amount of "unorganized carbon", which induces vacancy formation in the graphite planes and leads to a quite different morphology from that of the undoped material. Electrochemical charge/discharge cycle tests indicated that after boron doping the lithium intercalation was carried through at a somewhat higher potential, being attended by greater irreversible capacity loss. Electronic Publication     

ABA／PET液晶共聚酯酰胺的结构与性能

研究了对象基苯甲酸（ＡＢＡ）／聚对苯二甲酸乙二酯（ＰＥＴ）液晶共聚酯酰胺的晶体结构，以及热性能、流变学和力学性质。广角Ｘ射线衍射研究结果表明ＡＢＡ链节的引入使ＰＥＴ的晶态结构发生畸变，但大部分结晶衍射峰仍然存在。随着ＡＢＡ含量的增加，各晶面间距基本不变，微晶尺寸显著增大，结晶度急剧降低。差示扫描量热分析和热失重结果表明共聚酯胺具有优良的热稳定性，并且随着ＡＢＡ含量的增加，共聚物的热稳定性提高，共聚     

Synthesis and characterization of segmented liquid crystal poly(azoxy polyester-co-polyoxypropylene)

In this study a series of a segmented copolyester, poly(4,4′-dioxy-2,2′-dimethyl-azoxybenzene dodecanedioyl) (PMABD)-co-polyoxypropylene 400 (POP), was prepared. The chain length of PMABD studied (n) was varied from 7.8-18.2, and that of POP was unchanged. The intrinsic viscosity of the segmented copolyesters was 1.04-1.30, and the number average molecular weight obtained was 2.53 × 10⁴?3.49 × 10⁴ g/mol. The mesophase texture and thermal properties of the segmented copolyesters were measured as functions of n. It was found that the insert of flexible POP between those liquid crystalline domains of PMABD did affect thermotropic properties of PMABD. As the n value was 9.0 and 7.8 (or 7.4 and 8.6% by weight POP) the texture appeared as cholesteric-like oily streaks. The effect could not be attained by simply copolymerizing a mesogenic moiety with a pair of spacers of different lengths. The fluidity and domain structure of the flexible dodecanedioyl-POP-dodcanedioyl segments are taken into account for the obtained results. © 1995 John Wiley & Sons, Inc.     

Nanocomposite materials from latex and cellulose whiskers

Composite materials were processed by casting a mixture of aqueous suspensions of latex and microfibrils. These microfibrils, or whiskers, are extracted from a sea animal and are monocrystals of cellulose, with an aspect ratio around 100 and an average diameter of 20 nm. It has been found that the mechanical properties (shear modulus) are increased by more than two orders of magnitude in the rubbery state of the polymeric matrix, when the whisker content was 6% (w/w). This very large effect is discussed on the basis of different types of mechanical models and it is concluded that these whiskers form a rigid network, probably linked by hydrogen bonds. The formation of this network is assumed to be governed by a percolation mechanism.     

Analysis of dielectric observations of KCl-charged poly(methyl methacrylate) microcapsules using a two-component model consisting of KCl-permeable and KCl-impermeable capsules

Dielectric measurements were carried out on aqueous suspensions of poly(methyl methacrylate) microcapsules charged with KCl solutions to examine the KCl permeability of the microcapsules. The specimens exhibited three kinds of dielectric relaxation. Two kinds of dielectric relaxation were observed immediately after washing the specimens with distilled water. These overlapped each other when the specimen was left standing in the measuring cell for a long time. Their relaxation frequencies were affected by the KCl concentration of the suspending medium in which the specimen was kept before washing. Another relaxation was observed distinctly when the spepcimens were washed thoroughly with distilled water. Its relaxation frequency was affected by the KCl concentration of the charged solution. These results were explained by assuming that the specimens were mixtures of KCl-permeable and KCl-impermeable capsules. The theoretical analysis procedure was devised in the light of dielectric theory of interfacial polarization to estimate the parameters which characterize the structure of the specimens.     

Preparation, characterization, and application of multistimuli-responsive microspheres with fluorescence-labeled magnetic cores and thermoresponsive shells

Novel functional microspheres with multistimuli-responsive properties have been prepared and characterized. The as-prepared microspheres respond to an external magnetic field, environmental temperature, and ultraviolet radiation. The in vitro drug-loading efficiency and drug-release behavior of these microspheres demonstrated that they could be used as drug carriers for drug controlled release. The results of in vivo distribution investigations of these microspheres showed that they exhibit a high magnetic-targeting effect, which holds promise for applications in various fields such as magnetic drug targeting and tissue labeling, among others.     

Acetylation and molecular mass effects on barrier and mechanical properties of shortfin squid chitosan membranes

Chitosan samples with different N-deacetylation levels were obtained from β-chitin under heterogeneous alkali conditions. Oxidative depolymerisation was performed to attain low-acetylated chitosan samples with different molecular mass. Water vapour permeability, membrane swelling and tensile mechanical properties were analysed in plasticized self-supporting chitosan membranes. The main purpose was to describe unambigously the effect of the biopolymer molecular mass and acetylation degree on these properties. Commercially available chitosan samples derived from α-chitin were also studied for comparison. The equilibrium degree of swelling in water and the water vapour permeability increase by increasing the molecular mass or the degree of acetylation. Regarding the effect on the mechanical properties, generally harder and tougher membranes were obtained for chitosans with higher molecular mass or lower acetylation degree. These observations are tentatively explained based on the different structural characteristics of the polymer and can lead to a better understanding of the tools necessary to tailor a specific type of chitosan membrane.