不同软段结构聚氨酯-酰亚胺嵌段共聚物的合成及热性能研究

用二步法合成了不同软段 (PPO ,PEG ,PEPA)聚氨酯 酰亚胺 (PUI)嵌段共聚物 ,FTIR光谱表征了所有合成PUI分子主链均含有酰亚胺链段 ,并研究了PUI嵌段共聚物的热性能受软段类型及长度的影响 .DSC研究表明聚酯型PUI的软硬段之间的相容性比聚醚型PUI好 ,随相同软段分子量的增加 ,PUI体系的软硬段兼容性变差 ,并显示了相分离的特征 ;热失重 (TGA)研究得出不同软段的PUI样品的热稳定性大小顺序为 :PEPA PUI >PEG PUI>PPO PUI ;动态力学 (DMTA)研究给出了所合成的PUI样品在 5 0～ 2 0 0℃范围内均出现了较长的模量平台显示出有较好的耐热性 ,且随硬段含量的升高其储能模量不断增强     

PVTx measurements in the gas phase for binary mixtures of HFC-161 and HFC-227ea

The gaseous PVTx properties of ethyl fluoride (HFC-161) + 1,1,1,2,3,3,3-heptafluoropropane (HFC-227ea) mixtures were measured at temperatures from 318.180 to 403.205 K and corresponding pressures from 961.3 to 3129.8 kPa using the isochoric method. The uncertainties in the present measurements were estimated to be ±1.5 kPa for pressure and ±6 mK for temperature. On the basis of the experimental PVTx property data, a truncated virial equation of state was developed for the binary HFC-161/227ea system. This equation reproduced the experimental data in the gas phase within ±0.164% in pressure and within ±0.178% in density.     

Four Zn(II)/Cd(II)-3-amino-1,2,4-triazolate frameworks constructed by in situ metal/ligand reactions: Structures and fluorescent properties

Four Cd(II) and Zn(II) complexes with the in situ-generated ligand of 3-amino-1,2,4-triazolate (AmTAZ⁻) were isolated from the solvothermal reactions of the corresponding Cd(II) or Zn(II) salts with 5-amino-1H-1,2,4-triazole-3-carboxylic acid (AmTAZAc). Their structures were determined by single-crystal X-ray diffraction analysis. [Zn(AmTAZ)(CH₃COO)] (1) presents a two-dimensional framework constructed from Zn(II) ions and μ₃-AmTAZ⁻ ligands. A remarkable feature of [Zn₄(AmTAZ)₄(SO₄)(OH)(C₂O₄)_0.5]·2H₂O (2) is the construction of the building units of octagonal cylinders which interact with each other by sharing one face or overlapping, resulting in the formation of a three-dimensional framework with three kinds of 1D channels. [Cd(AmTAZ)Br] (3) crystallizes in a chiral space group P2₁2₁2₁, giving a homochiral three-dimensional framework with two types of helical channels (left- and right-handed). Different from the others, the 3-amino-1,2,4-triazole molecules in [Cd(AmTAZH)SO₄] (4) behave as neutral μ₂-2,4-bridges to connect the two-dimensional CdSO₄ sheets into a three-dimensional framework. Of all, 2 and 3 display different fluorescent properties probably due to different metal ions, coordination environments and structural topologies.     

Synthesis, crystal structures, and luminescent properties of two types of lanthanide phosphonates

Hydrothermal reactions of different lanthanide(III) salts with an amino-diphosphonate ligand (H₄L=C₆H₅CH₂N(CH₂PO₃H₂)₂) led to two series of lanthanide phosphonates, namely, Ln(H₂L)(H₃L) (Ln=La, 1; Pr, 2; Nd, 3; Sm, 4; Eu, 5; Gd, 6; Tb, 7). Compounds 1-5 feature a one-dimensional (1D) chain structure in which dimers of two edge-sharing LnO₈ polyhedra are interconnected by bridging phosphonate groups, such 1D arrays are further interlinked via strong hydrogen bonds between non-coordinated phosphonate oxygen atoms into a two-dimensional (2D) layer with the phenyl groups of the ligands orientated toward the interlayer space. Compounds 6 and 7 also show a different 1D array in which the LnO₆ octahedra are bridged by phosphonate groups via corner-sharing, such chains are also further interlinked by hydrogen bonds into a 2D supramolecular layer. Compounds 5 and 7 emit red and green light with a lifetime of 2.1 and 3.7 ms, respectively.     

Effect of metal ions on structural,morphological and optical properties of nano-crystallite spinel cobalt-aluminate (CoAl2O4)

The bright blue nano crystallite cobalt aluminate (CoAl₂O₄) was synthesized by sol–gel method using a mixture of chelating agent of glycerol and citric acid. The effects of changing (0.05, 0.075, 0.10, 0.25, 0.50, and 0.75 mol/L) metal ion concentration on the structural, morphological and color properties of synthesized CoAl₂O₄ were characterized by using X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), Nanoparticle size analyzer, Simultaneous Thermal Analyzer (STA), UV–vis absorption spectroscopy, and CIE-LAB colorimetric analysis. From the X-ray peak profile analysis, the crystallite size was measured by Debye-Scherrer (D-S) equation, and three different models presenting average crystallite sizes between 88.3 and 125.4 nm.The average lattice strain, dislocation density, lattice constant, cell volume, and zeta potential were between 0.00021 and 0.0058, (1.73 to 12.8) × 10¹⁴ (lines/m²), 8.10658 to 8.11181 Å, 533.60 to 533.81 Å³, ?56.4 to ? 63.5 mV, respectively. Using UV–vis absorption spectroscopy, the band gap was calculated from Kubelka-Munk method, and the values of band gap increasing from 1.82 to 1.84 eV, respectively. The reflectance spectra and the CIE-L*a*b* values of cobalt aluminate is also measured which confirmed the formation of blue nano crystallite cobalt aluminate.     

Physico-Chemical Properties of Magnetic Dicationic Ionic Liquids with Tetrahaloferrate Anions

A series of imidazolium-based symmetrical and asymmetrical dicationic ionic liquids (DcILs) with alkyl spacers of different length and with [FeCl₃Br]⁻ as counter ion have been synthesized. The synthesized DcILs are characterized by using FTIR and Raman spectroscopy as well as mass spectrometry, along with single-crystal XRD analysis. Physicochemical properties such as solubility, thermal stability and magnetic susceptibility are also measured. These compounds show low melting points, good solubility in water and organic solvents, thermal stability, and paramagnetism. The products of molar susceptibility and temperature (χ_mol⋅T) for the synthesized DcILs have been found between 4.05 to 4.79 emu mol⁻¹ K Oe⁻¹ and effective magnetic moment values have also been determined to be compared to that expected from the spin-only approximation.     

Physicochemical Properties and Elimination of the Activity of Anti-Nutritional Serine Protease Inhibitors from Mulberry Leaves

Mulberry leaf is an excellent protein resource that can be used as feed additive for livestock and poultry. Nevertheless, the use of mulberry leaves in animal diets is limited by its protease inhibitors, tannic acid and other anti-nutritional factors. This study systematically analyzed the type and activity of serine protease inhibitors (SPIs) from the leaves of 34 mulberry varieties, aiming to reveal the physicochemical properties and inactivation mechanism of SPIs. The types and activities of trypsin inhibitors (TIs) and chymotrypsin inhibitors (CIs) exhibited polymorphisms among different mulberry varieties. The highest number of types of inhibitors was detected in Jinshi, with six TIs (TI-1~TI-6) and six CIs (CI-1~CI-6). TIs and CIs exhibited strong thermal and acid–base stability. High-temperature and high-pressure treatment could reduce the activities of TIs and CIs to a certain extent. β-mercaptoethanol treatment could completely abolish TIs and CIs, suggesting that the disulfide bridges were critical for their inhibitory activities. The Maillard reaction could effectively eliminate the inhibitory activities of TI-1~TI-4 and CI-1~CI-4. This study reveals the physicochemical properties and inactivation mechanisms of the anti-nutritional SPIs from mulberry leaves, which is helpful to exploit mulberry-leaf food with low-activity SPIs, promote the development and utilization of mulberry-leaf resources in animal feed and provide reference for mulberry breeding with different functions.     

Insights on the Synthesis of N-Heterocycles Containing Macrocycles and Their Complexion and Biological Properties

Macrocyclic chemistry has been extensively developed over the past several decades. In fact, the architecture of new macrocyclic models has undergone exponential growth to offer molecules with specific properties. In this context, an attempt is made in this study to provide an overview of some synthetic methods allowing the elaboration of N-heterocycles containing macrocycles (imidazole, triazole, tetrazole, and pyrazole), as well as their applications in the complexation of metal cations or as pharmacological agents.     

Recent Progress in Iron-Based Microwave Absorbing Composites: A Review and Prospective

With the rapid development of communication technology in civil and military fields, the problem of electromagnetic radiation pollution caused by the electromagnetic wave becomes particularly prominent and brings great harm. It is urgent to explore efficient electromagnetic wave absorption materials to solve the problem of electromagnetic radiation pollution. Therefore, various absorbing materials have developed rapidly. Among them, iron (Fe) magnetic absorbent particle material with superior magnetic properties, high Snoek’s cut-off frequency, saturation magnetization and Curie temperature, which shows excellent electromagnetic wave loss ability, are kinds of promising absorbing material. However, ferromagnetic particles have the disadvantages of poor impedance matching, easy oxidation, high density, and strong skin effect. In general, the two strategies of morphological structure design and multi-component material composite are utilized to improve the microwave absorption performance of Fe-based magnetic absorbent. Therefore, Fe-based microwave absorbing materials have been widely studied in microwave absorption. In this review, through the summary of the reports on Fe-based electromagnetic absorbing materials in recent years, the research progress of Fe-based absorbing materials is reviewed, and the preparation methods, absorbing properties and absorbing mechanisms of iron-based absorbing materials are discussed in detail from the aspects of different morphologies of Fe and Fe-based composite absorbers. Meanwhile, the future development direction of Fe-based absorbing materials is also prospected, providing a reference for the research and development of efficient electromagnetic wave absorbing materials with strong absorption performance, frequency bandwidth, light weight and thin thickness.