一类具无穷时滞泛函微分方程的周期解

讨论具有无穷时滞中立型泛函微分方程$ \frac{\rm d}{{\rm d}t}\left(x(t)-\int_{-\infty}^{0}g(s,x(t+s)){\rm d}s\right) =A(t,x(t))x(t)+f(t,x_t)$的周期解问题,利用重合度理论中的延拓定理得到了周期解的存在性和唯一性条件;特别地,当$g(s,x)\equiv 0, A(t,x)=A(t)$时, 给出了存在唯一稳定周期解的条件.     

Effects of the architecture and environment on polymeric molecular assemblies of novel amphiphilic diblock copolynorbornenes with narrow polydispersity via living ring‐opening metathesis polymerization

Diblock copolymers of 5‐(methylphthalimide)bicyclo[2.2.1]hept‐2‐ene (NBMPI) and 1,5‐cyclooctadiene were synthesized by living ring‐opening metathesis polymerization with a well‐defined catalyst {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂}. Unhydrogenated diblock copolymers showed two glass transitions due to poly(NBMPI) and polybutadiene segments, such as two glass‐transition temperatures at ?86.5 and 115.3 °C for poly 1a and ?87.2 and 115.3 °C for poly 1b . However, only one melting temperature could be observed for hydrogenated copolymers, such as 119.8 °C for poly 2a and 121.7 °C for poly 2b . The unhydrogenated diblock copolymer with the longer poly(NBMPI) chain (poly 1a ; temperature at 10% mass loss = 400 °C) exhibited better thermal stability than the one with the shorter poly(NBMPI) chain (poly 1b ; temperature at 10% mass loss = 385 °C). Two kinds of hydrogenated diblock copolymers, poly 2a and poly 2b , exhibited relatively poor solubility but better thermal stability than unhydrogenated diblock copolymers because of the polyethylene segments. Poly[(hydrochloride quaternized 2‐norbornene‐5‐methyleneamine)‐b‐butadiene]‐1 (poly 3a ) was obtained after the hydrolysis and quaternization of poly 1a . Dynamic light scattering measurements indicated that the hydrodynamic diameters of the cationic copolymer (poly 3a ) in water (hydrodynamic diameter = 1580 nm without salt), methanol/water (4/96 v/v; hydrodynamic diameter = 1500 nm without salt), and tetrahydrofuran/water (4/96 v/v; hydrodynamic diameter = 1200 nm without salt) decreased with increasing salt (NaCl) concentration. The effect of temperature on the hydrodynamic diameter of hydrophobically modified poly 3a was also studied. The inflection point of the hydrodynamic diameter of poly 3a was observed at various polymer concentrations around 30 °C. The critical micelle concentration of hydrophobically modified poly 3a was observed at 0.018 g dL^?1. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2901–2911, 2006     

On Ramsey numbers of uniform hypergraphs with given maximum degree

For every ?>0 and every positive integers Δ and r, there exists C=C(?,Δ,r) such that the Ramsey number, R(H,H) of any r-uniform hypergraph H with maximum degree at most Δ is at most C|V(H)|^1+?.     

The effect of oxidation on physical properties of porous silicon layers for optical applications

In order to understand the optical loss mechanisms in porous silicon based waveguides, structural and optical studies have been performed. Scanning and transmission electron microscopic observations of porous silicon layers are obtained before and after an oxidation process at high temperature in wet O₂. Pore size and shape of heavily p-type doped Si wafers are estimated and correlated to the optical properties of the material before and after oxidation. The refractive index was measured and compared to that determined by the Bruggeman model.     

符号几何规划的一种分解方法

针对符号几何规划提出了一种直接的分解方法,将难于求解的符号几何规划问题等价地转化为一个非线性程度很低的可分离规划,为寻求困难度高且规模较大的符号几何规划问题的求解提供了一种方法,特别是经此方法分解后的每个子问题均易于求解,最后给出了数值实例,验证了此方法的有效性．     

Ti－Si沸石的催化氧化性能Ⅱ．环己醇的氧化及环己酮的肟化

Ｔｉ－Ｓｉ沸石的催化氧化性能Ⅱ．环己醇的氧化及环己酮的肟化夏清华，王公慰，应慕良，郑禄彬（中国科学院大连化学物理研究所，大连１１６０１２）关键词Ｔｉ－Ｓｉ沸石催化剂，Ｈ_２Ｏ_２氧化剂，环己醇氧化，环己酮肟化．１．前言环己酮肟是生产ε－己内酰胺的关键中...     

Na2SnO3系催化剂在甲烷氧化偶联反应中的催化性能及表面碱性的探讨

1982年Keller和Bhasin以金属氧化物为催化剂从甲烷制得少量乙烯和乙烷的工作引起了各国研究工作者的重视,此后报道了许多有研究价值的催化剂,其中添加碱金属对提高催化性能所起的作用引起了普遍的关注.Lunsford等首先用添加Li~+的MgO作催化剂,发现催化剂表面碱性增强的同时,生成C_2烃类产物的选择性明显增加.随后Iwamatu等在MgO中添加Na~+及Rb~+盐,Jones等在Mn~(4+)/SiO_2中添加Na~+,Otsuka等在Sm_2O_3中添加LiCl作为甲烷氧化偶联催化剂进行了研究,这些结果均表明,因添加碱金属使催化剂呈现     

自由基引发马来酸二丁酯熔融接枝低密度聚乙烯的研究

用马来酸二丁酯(DBM)为接枝单体,过氧化二枯基(DCPO)为引发剂,对低密度聚乙烯(LDPE)进行了熔融接枝功能化。样品的红外光谱表明接枝反应确已发生。通过对样品中酯基的皂化水解测定产物的接枝率,对产物进行萃取,用凝胶量间接表征产物的交联程度;用溶液的特性粘度从侧面显示样品的支化或降解情况。实验结果表明,产物的接枝率和凝胶量可以通过选择反应条件(温度、时间及反应混合物的组成)来控制;过量的DCPO是引起交联产生凝胶的主要原因;向体系中添加DMF可阻止交联反应的发生,但产物的接枝率也有所下降,以自由基机理对上述结果进行了讨论。     

长叶烯通过异构化,氧化和Prins反应合成新型香料

本文报道综合利用长叶烯（１）催化异构化为异长叶烯（２）及合成系列香料的方法；通过氧化反应合成不同香型烯醇酯类等；Ｐｒｉｎｓ反应合成系列化合物。鉴定了１０种香料化合物的香型。