Compehensive two-dimensional gas chromatography (GC×GC) and its applicability to the characterization of complex (petrochemical) mixtures

In general, petrochemical products contain only a limited number of chemical classes of compounds (sample dimensionality). The enormous number of individual components within these classes, however, soon puts limitations upon a single chromatographic technique when it comes to adequate characterization of these products. Comprehensive two-dimensional gas chromatography (GC×GC) clearly opens the possibility of estimating the composition of hydrocarbon mixtures in a far more detailed fashion than hitherto possible. Although the emphasis of papers of GCxGC thus far almost exclusively applies to the unsurpassed peak-capacity, in the oil industry there is a need for characterization, rather than for analyzing all the individual compounds. In principle a GCxGC system can provide an almost perfect match between its intrinsic properties and the dimensionality of oil samples. To establish the applicability of GCxGC towards petrochemical analytical challenges, a commercially aavailable prototype instrument was subjected to an exhaustive characterization of a typical hydrocarbon precess stream and a fast characterization of a light gas oil. Although there are no fundamental limitations towards the quantitative aspects of a GCxGC system, this paper confines itself to qualitative results only. Quantitative aspects of GCxGC will be published in a forthcoming paper.     

Analysis of Petroleum Distillates from Fire Debris Using Supercritical Fluid Extraction with a Two‐Level Orthogonal Array Experimental Design

A supercritical fluid extraction (SFE) method was developed in the present study as an effective sample pretreatment technique of petroleum distillates from fire debris. Three petroleum distillates were used as target analytes, including 95 unleaded gasoline, kerosene, and premium diesel. An orthogonal array (L16) experimental design was adopted to separately evaluate primary SFE experimental factors. The SFE efficiencies of petroleum distillates at various extraction conditions were examined and the optimized SFE conditions were identified. Experimental results demonstrated that the optimized SFE method not only provided an effective extraction method for the spiked sample, but also successfully recovered residues of petroleum distillates from fire debris.     

基于迭代小波变换的光谱信号本底扣除方法研究

本底会对光谱分析结果产生很大的干扰作用,为获取特征峰的有效信息,必须首先去除本底。该文提出了一种基于小波变换的本底扣除算法,通过对光谱及后续光谱迭代进行小波变换,利用逼近系数估计本底,直到本底收敛。提出了判断多次估计的本底最大误差是否足够小的收敛准则。利用该算法去除本底后,即可进行特征峰信息的提取。分别利用仿真光谱和实验能量色散X射线荧光光谱对算法进行了验证,并与传统小波变换和多项式拟合法进行了对比。结果表明,该算法能够更准确扣除光谱本底,对其他光谱的本底扣除也具有借鉴意义。     

工作用玻璃液体温度计温度修正值的测量不确定度分析

依据JJF1059－1999，利用二等水银湿度计标准装置，分析了工作用玻璃液体温度计温度修正值的测量不确定度。当温度测量点为20℃时，工作用玻璃液体温度计温度修正值的扩展不确定度为0.054℃，当温度测量点为95℃时，工作用玻璃液体温度计温度修正值的扩展不确定度为0.055℃。     

茜素红与蛋白质分子Langmuir吸附聚集反应研究

在pH4.3的B-R缓冲体系中,用微相吸附-光谱修正技术[1]研究了茜素红(ARS)与牛血清白蛋白(BSA)、人血清白蛋白(HSA)的结合反应。其吸附结合常数分别为:KBSA-ARS=3.950×104,KHSA-ARS=4.377×104。染料与蛋白的最大结合数分别为NARS∶NBSA=9∶1,NARS∶NHSA=7∶1。经光谱修正技术计算结合产物的实际摩尔吸光系数分别为εBSA-ARS(537nm)=2.517×104L.mol-1.cm-1,εHSA-ARS(519nm)=2.051×104L.mol-1.cm-1,检出限BSA为19mg/L,HSA为23mg/L。经探讨该结合反应机理符合Langmuir吸附聚集反应方程。     

EDS X-Ray Investigation of Interdiffusion in Au–Ni Micro- and Nanolayers

The interdiffusion process in thin and thick (500nm–60µm) Au–Ni layers deposited on different substrates is studied using the EDS technique. In-depth X-ray analysis based on the Pouchou and Pichoir method is applied for obtaining the concentration profiles in nanometre scale multi-layers. A theoretical analysis using the Darken method is employed for modelling interdiffusion in the Au–Ni system. Computer simulations, where intrinsic diffusivities of the Au and Ni are functions of composition, are presented and compared with experimental results.     

Stochastic resonance is applied to quantitative analysis for weak chromatographic signal of glyburide in plasma

Based on the theory of stochastic resonance, a new method carried on the quantitive analysis to weak chromatographic signal of glyburide in plasma, which was embedded in the noise background and the signal-to-noise ratio (SNR) of HPLC-UV is enhanced remarkably. This method enhances the quantification limit to 1 ng ml⁻¹, which is the same as HPLC-MS, and makes it possible to detect the weak signal accurately by HPLC-UV, which was not suitable before. The results showed good recovery and linear range from 1 to 50 ng ml⁻¹ of glyburide in plasma and the method can be used for quantitative analysis of glyburide.     

Probability theory and polymer physics

This study applies the theory of stochastic processes to the equilibrium statistical physics of polymers in solution. The topics treated include random copolymers and randomly branching polymers, with self-consistent mean field effects. A new and more natural way of dealing with Boltzmann weighting is discussed, which makes it possible from the beginning of a calculation to consider only the physical polymer conformations. We also show that in general the random copolymer problem can be reduced to the ordinary polymer problem, and treat the self-consistent field problem for a general branching polymer.     

Synthesis,characterization, and application of griseofulvin surface molecularly imprinted polymers as the selective solid phase extraction sorbent in rat plasma samples

In present study, an investigation was carried out to develop and validate an analytical method for the selective extraction and determination of griseofulvin (GSF) from plasma samples. For this purpose, a rational approach was made to synthesize and characterize the surface molecularly imprinted polymers (SMIPs). The SMIPs were utilized as solid phase extraction (SPE) sorbents. The SMIPs were prepared by using GSF as template molecule on the surface of modified silica particles through a non-covalent technique. The particles demonstrated high adsorption capacity (119.1 µg/mL), fast adsorption equilibrium time (30 min) and good recognition selectivity for the template drug. The scanning electron microscopy and infrared spectroscopy were used to explain the structural and morphological characteristics of the SMIPs and surface non-imprinted polymers. The SPE method was combined with HPLC for plasma analysis. The method validation results demonstrated that the established method possessed good linearity for GSF ranging from 0.1 to 50 µg/mL (R² = 0.997). The limit of detection for this method was 0.02 µg/mL for rat plasma samples. The recoveries of GSF from spiked plasma samples were (90.7–97.7%) and relative standard deviations were (0.9–4.5%). Moreover, the SMIPs as selective SPE sorbent can be reused more than 8 times which is a clear advantage over commercial SPE sorbents. Finally, the usefulness of the proposed strategy was assessed by extraction and detection of GSF in real rat plasma samples.     

Influences of aerodynamic loads on hunting stability of high-speed railway vehicles and parameter studies

The influences of steady aerodynamic loads on hunting stability of high-speed railway vehicles were investigated in this study.A mechanism is suggested to explain the change of hunting behavior due to actions of aerodynamic loads：the aerodynamic loads can change the position of vehicle system（consequently the contact relations）,the wheel/rail normal contact forces,the gravitational restoring forces/moments and the creep forces/moments.A mathematical model for hunting stability incorporating such influences was developed.A computer program capable of incorporating the effects of aerodynamic loads based on the model was written,and the critical speeds were calculated using this program.The dependences of linear and nonlinear critical speeds on suspension parameters considering aerodynamic loads were analyzed by using the orthogonal test method,the results were also compared with the situations without aerodynamic loads.It is shown that the most dominant factors a ff ecting linear and nonlinear critical speeds are different whether the aerodynamic loads considered or not.The damping of yaw damper is the most dominant influencing factor for linear critical speeds,while the damping of lateral damper is most dominant for nonlinear ones.When the influences of aerodynamic loads are considered,the linear critical speeds decrease with the rise of cross wind velocity,whereas it is not the case for the nonlinear critical speeds.The variation trends of critical speeds with suspension parameters can be significantly changed by aerodynamic loads.Combined actions of aerodynamic loads and suspension parameters also a ff ect the critical speeds.The effects of such joint action are more obvious for nonlinear critical speeds.