牵伸倍率对联苯型聚酰亚胺纤维形貌、取向及性能的影响

均苯四甲酸二酐(PMDA)和联苯二酐(BPDA)与3,3′-二甲基联苯二胺(OTOL)共聚得到聚酰亚胺(PI)溶液,通过干喷-湿法纺制成纤维.利用扫描电镜(SEM)、广角X射线衍射(WAXD)、纤维力学性能测试仪、动态力学分析仪(DMA)和热失重分析仪(TGA)等表征手段,研究不同牵伸倍率对联苯型聚酰亚胺纤维形貌结构、...     

Crystallization behavior of polylactide on highly oriented polyethylene thin films

The crystalline structure and morphology of the PLA crystallized isothermally from the glassy state on highly oriented PE substrates at 130℃were investigated by means of optical microscopy,AFM and X-ray diffraction.The results indicate that the PE substrate influences the crystallization behavior of PLA remarkably,which leads to the growth of PLA crystals on PE substrate always in edge-on form rather than the twisted lamellar crystals from edge-on to flat-on when crystallizing the PLA on glass surface under the same condition.The edge-on PLA lamellae on the PE substrate are preferentially arranged with their long axes in the chain direction of the PE substrate crystals.It is further demonstrated that except for the different crystal orientation,the PE does not influence the crystalline modification and crystallinity of the PLA.     

Solubility and microstructure in the pseudo-binary PbTe-Ag2Te system

The solvus lines of the PbTe and Ag₂Te phases in the pseudo-binary PbTe-Ag₂Te system have been determined using diffusion couples and unidirectional solidification by the Bridgman method. The solubilities of both Ag₂Te in PbTe and PbTe in Ag₂Te decrease with decrease in temperature. For the former, this change is from 14.9 at% Ag (694 °C) to 0.5 at% Ag (375 °C), while for the latter it is from 12.4 at% Pb (650 °C) to 3.1 at% Pb (375 °C). The decrease in solubilities leads to the formation of precipitates of Ag₂Te in PbTe and PbTe in Ag₂Te. In particular, fast atomic diffusion in Ag₂Te results in the precipitation of PbTe even in quenched samples. From the temperature dependence of these solubilities, heats of solution have been determined. In the diffusion couple, the phase boundary moves toward PbTe. In the region between the phase boundary and the initial interface, PbTe transforms to β-Ag₂Te (cubic) retaining the cube-on-cube orientation relationship.     

A 3D non-linear orientation prediction wavelet transform for interference hyperspectral images compression

According to the characteristic of large aperture static interference imaging spectrometer (LASIS), a non-linear orientation prediction three-dimensional (3D) wavelet transform method is proposed in this paper on the basis of the 3D orientation prediction wavelet transform method proposed by Li, Ma and Wu in 2008 [1]. The method proposed in this paper still combines directional prediction into 3D lifting wavelet transformation, but compared with the 3D orientation prediction wavelet transform method, it made a breakthrough in the limitation that the orientation predicted must be a straight linear direction. The experimental results showed that this method improved the performance of wavelet obviously, especially on the LASIS image with quite severe and unstable directional characteristic as seen in the study of Ma and Ma (2009) [2]. Meanwhile, the characteristic of spectrum image recovered by the proposed method also possessed better performance.     

钛酸钡纳米颗粒聚集球的形成机理

采用水热法合成了具有新颖结构的钛酸钡纳米颗粒聚集球.X射线衍射(XRD)结果显示该聚集球为立方相,随着时间的延长其结晶性增强.利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)和电子衍射(ED)谱研究了该纳米颗粒聚集球的生长特点.结果表明该聚集球是由5-8nm的纳米颗粒定向连接生长而成,整个聚集球对外显示类单晶的现象.聚集球的大小约为60nm,随着时间的延长有长大的趋势.X射线能谱(EDX)分析结果和Johnson-Mehl-Avrami(JMA)方程动力学模拟结果表明,在颗粒球形成初始阶段主要是Ba2+离子的扩散成核作用占主导地位.这种"扩散成核-定向生长"的形成过程揭示了钛酸钡纳米颗粒聚集球的生长机理.     

红外二向色性技术在聚合物／无机物纳米复合材料取向结构研究中的应用

红外二向色性技术作为聚合物分子取向结构的一种重要研究方法,近年来已被应用于聚合物／无机物纳米复合与杂化材料的研究。本文结合作者的研究工作,对近年来聚合物／无机物纳米复合材料取向结构的研究进展进行了综述。首先介绍了纳米复合材料的基本概念和红外二向色性技术的基本原理,然后结合实例简要介绍红外二向色性技术在聚合物取向研究中的...     

Dielectric and piezoelectric properties of the Ba0.92Ca0.08Ti0.95Zr0.05O3 thin films grown on different substrate

Lead free Ba_0.92Ca_0.08Ti_0.95Zr_0.05O₃ (BCZT) thin films were deposited on Pt/Ti/SiO₂/Si and LaNiO₃(LNO)/Pt/Ti/SiO₂/Si substrates by a sol–gel processing technique, respectively. The effects of substrate on structure, dielectric and piezoelectric properties were investigated in detail. The BCZT thin films deposited on LNO/Pt/Ti/SiO₂/Si substrates exhibit (100) orientation, larger grain size and higher dielectric tunability (64%). The BCZT thin films deposited on Pt/Ti/SiO₂/Si exhibit (110) orientation, higher Curie temperature (75 °C), better piezoelectric property (d₃₃ of 50 pm/V) and lower dielectric loss (0.02). The differences in dielectric and piezoelectric properties in the two kinds of oriented BCZT films should be attributed to the difference of structure, in-plane stress and polarization rotation in orientation engineered BCZT films.     

Novel type of tunable infrared filters based on the Al2O3 particles - Liquid crystal system

The optical transmission of small aluminum oxide particles in liquid crystal 4-methoxybenzylidene-4′-butylaniline (MBBA) and dual-frequency liquid crystal mixture consisting of 4-n-pentyl-4′-cyanobiphenyl (5CB), 4-hexyloxyphenyl ester 4′-hexyloxy-3-nitrobenzoic acid (C2), 4-n-pentanoyloxy-benzoic acid-4′-hexyloxyphenyl ester (H 22) was studied. It was established that there was a transmission band which was shifted on application of a voltage and depended on temperature. At using the dual-frequency liquid crystal as a matrix, a transmission band maximum switched at changing of the frequency. The experimental results are explained by the optical homogeneity of the system in a narrow wavenumber interval when the refractive indices of the particle material and the matrix are close, and also by re-orientation of the liquid crystal molecules when a voltage is applied.The obtained results can be used in constructing of tunable filters and compact monochromators.     

Dependence of extinction cross-section on incident polarization state and particle orientation

This note reports on the effects of the polarization state of an incident quasi-monochromatic parallel beam of radiation and the orientation of a hexagonal ice particle with respect to the incident direction on the extinction process. When the incident beam is aligned with the six-fold rotational symmetry axis, the extinction is independent of the polarization state of the incident light. For other orientations, the extinction cross-section for linearly polarized light can be either larger or smaller than its counterpart for an unpolarized incident beam. Therefore, the attenuation of a quasi-monochromatic radiation beam by an ice cloud depends on the polarization state of the beam if ice crystals within the cloud are not randomly oriented. Furthermore, a case study of the extinction of light by a quartz particle is also presented to illustrate the dependence of the extinction cross-section on the polarization state of the incident light.