PURE STATE APPROACH TO $C(X)×_\alpha Z_n$

ＰＵＲＥ ＳＴＡＴＥ ＡＰＰＲＯＡＣＨ ＴＯ Ｃ（ｘ）_αＺ_nＬＩＢＩＮＧＲＥＮ；ＬＩＮＱＩＮＧ（ＩｎｓｔｉｔｕｔｅｏｆＭａｔｈｅｍａｔｉｃｓ，ＡｃａｄｅｍｉａＳｉｎｉｃａ，Ｂｅｉｊｉｎｇ１０００８０，Ｃｈｉｎａ．Ｐｒｏｊｅｃｔｓｕｐｐｏｒｔｅｄｂｙｔｈ?..     

35Cr25Ni12奥氏体耐热钢中碳化物的电子显微分析

应用扫描电镜（SEM）和透射电镜（TEM）研究了长期使用前后的35Cr25Ni12奥氏体耐热钢中的碳化物演变行为；该钢固溶时效后的组织由初晶奥氏体及M23C6共晶碳化物组成，奥氏体基体中析出了二次M23C6，二次碳化物总是与基体保持立方－立方取向关系；长期使用（3、5年）后，奥氏体中析出的二次碳化物量明显增加，部分M23C6已转变为M6C，M6C与奥氏体基体以及二次碳化物M23C6保持[001]M6C//[221]A//[221]M23C6孪晶取向关系。     

STUDY ON MAGNETIC FIELD-INDUCED 0RIENTATI0N OF A CHIRAL SIDE-CHAIN LIQUID CRYSTAL POLYACRYLATE USING INFRARED DICHROISM

Magnetic field-induced orientation of a chiral side chain liquid crystalline polyacrylate(P-11) was studied by using IR dichroism. For the investigated P-11, it has been shown thatthe magnetic alignment takes place over the entire temperature range between its meltingpoint and clearing point and the orientation level is strongly temperature-dependent, thedevelopment with time of the magnetic orieatation follows an exponeotial-type relation,and the smectic phase state influences the thermal relaxation process in the absence of themagnetic field.     

预取向液晶单体光聚合反应

通过表面摩擦、施加外电场(或磁场)和应力剪切等手段使液晶单体取向后进行光聚合反应是制备高度取向、高度均匀和高度透明高分子液晶膜的重要方法。它在高分子非线性光学材料、导电商分子材料和光纤涂层等领域中具有广泛的应用前景。     

Micropatterning of semicrystalline poly(vinylidene fluoride) (PVDF) solutions

Micropatterning of a semicrystalline poly(vinylidene fluoride) (PVDF) solution was performed by a temperature controlled capillary micromolding where the rate of solvent evaporation was controlled by substrate temperature. In order to choose proper solvents for micropatterning, we have investigated the solubility of PVDF in various organic solvents and crystal structures of the PVDF bulk films cast from the solvents. The films prepared from the polar solvents such as dimethylformamide (DMF), dimethyl sulfoxide (DMSO) dominantly showed γ type crystals regardless of preparation temperature, while the films from tetrahydrofuran (THF) exhibit α type crystals and the ones from acetone and methyl ethyl ketone (MEK) show the characteristics of both α- and γ-PVDF. The quality of micropatterns and shapes of the PVDF crystals in the patterns significantly depend on solvent evaporation rates. Micropatterns of PVDF formed in DMF at 120 °C showed the best uniformity in shape. Crystals of the PVDF nucleated at the center regions of microchannels tended to be elongated with the b-axis of γ-PVDF crystals along the channels as the concentration of the solution decreased. In contrast, crystals nucleated at the corner regions of the channels had their b-axis oriented perpendicular to the channels. In line patterns with the width of 2 μm, the corner nucleated crystals were dominant and a resulting bamboo-like crystalline microstructure was observed in which the b-axis of γ-PVDF crystals, fast growth direction, is oriented normal to the microchannels. The crystal structures of the bulk films and the micropatterns were characterized by X-ray diffractometer, Fourier transform infrared spectroscope in Attenuated Total Reflection mode, Polarized Optical and Scanning Electron Microscope.     

Two-beam interference detection of the changes in fibre structural parameters during low drawing process

A Pluta polarizing interference microscope with a fibre stretching device attached was used to detect the changes in molecular structure that occur during the fibre cold drawing process. Fibres drawn with low draw ratios show different types of deformation mechanisms. The interference patterns recorded at different draw ratios are used to relate the deformation mechanisms with the measured structural parameters. Some optical parameters are measured such as; refractive indices nand n birefringence n, the polarizability per unit volume , the orientation distribution function f(θ), the angle θ between the stretching direction and the chain axis, and the angle θ_m which the transition dipole moment of the molecular species makes with the molecular axis (chain axis). Three polymeric fibres (Polyethylene terephthalate PET, Polypropylene PP and Polyamide PA) were used in this study and their interferograms are illustrated.     

Orientation of a chiral smectic C elastomer by mechanical fields

It is well known that, with respect to the director, nematic elastomers can be macroscopically aligned by uniaxial mechanical fields. Extending this method to a chiral smectic C elastomer, depending on the experimental set-up either smectic layer orientation or director orientation parallel to the stress axis occurs. In order to align the director and the smectic layers a biaxial mechanical field (e.g. shear field) consistent with the phase symmetry has to be used to achieve a macroscopically uniform orientation of the untwisted smectic C^* structure.     

Estimation of martensite feature size in a low-carbon alloy steel by microtexture analysis of boundaries

A methodology for classifying the hierarchy of martensite boundaries from the EBSD microtexture data of low-carbon steel is presented. Quaternion algebra has been used to calculate the ideal misorientation between product α variants for Kurdjumov–Sachs (KS) and its nearby orientation relationships, and arrive at the misorientation angle-axis set corresponding to packet (12 types), block (3 types) and sub-block boundaries. Analysis of proximity of experimental misorientation between data points from the theoretical misorientation set is found to be useful for identifying the different types of martensite boundaries. The optimal OR in the alloy system and the critical deviation threshold for identification of martensite boundaries could both be ascertained by invoking the ‘Enhancement Factor’ concept. The prior-γ grain boundaries, packet, block and sub-block boundaries could be identified reasonably well, and their average intercept lengths in a typical tempered martensite microstructure of 9Cr–1Mo–0.1C steel was estimated as 31 μm, 14 μm, 9 μm and 4 μm respectively.     

锥光干涉法表征偶氮苯侧链液晶聚合物的光致取向

采用偏光显微镜在平行光和锥光条件下对液晶聚合物膜内分子的取向排列状态进行了研究,不同取向状态的膜由线偏振光或圆偏振光照射偶氮苯侧链液晶聚合物得到。结果表明,液晶聚合物膜采用线偏振光照射时,偶氮苯介晶基元沿面排列,形成单相畴面内取向态。该取向态的锥光干涉图为位于视场中心的粗黑十字,旋转载物台小于10°,该干涉图即完全退出...     

不同管径聚乙烯管的旋转挤出

通过口模旋转挤出制备3种管径聚乙烯(PE)管,系统研究其结构与性能。结果表明,相较于传统挤出PE管内串晶平行与轴向,旋转挤出过程中聚合物熔体的流动是轴向牵引流动和环向拖曳流动的叠加,其方向偏离轴向,可诱导串晶偏离轴向排列,从而提高PE管的环向取向度,实现PE管的环向增强,抑制裂纹在PE管内沿轴向扩展。随PE管管径的增加,在相同旋转角速度下环向流动线速度增大,串晶偏离轴向的夹角增加,环向取向度更高,因而旋转挤出制备的大口径PE管具有更优的性能。