Phosphaniminato-Komplexe des Schwefels. Synthese und Kristallstrukturen von [O3SS(NPPh3)2] · CH3CN, [SO(NPPh3)2] und [SCl(NPMe3)2]Cl

Phosphorane Iminato Complexes of Sulfur. Syntheses and Crystal Structures of [O₃SS(NPPh₃)₂] · CH₃CN, [SO(NPPh₃)₂], and [SCl(NPMe₃)₂]Cl The title compounds have been prepared by the reaction of Me₃SiNPPh₃ with SO₂ and SOCl₂, respectively, and by the reaction of Me₃SiNPMe₃ with S₂Cl₂. They form colourless, moisture sensitive crystals, which were characterized by IR spectroscopy and by crystal structure determinations. [O₃SS((NPPh₃)₂)] · CH₃CN : Space group Pca2₁, Z = 4, structure solution with 4016 observed unique reflections, R = 0.050. Lattice dimensions at ?60°C: a = 1865.1, b = 1168.4, c = 1569.0 pm. The compound has a zwitterionic structure with a S? S bond length of 218.2 pm and bond lengths S? N of 161.2 and P? N of 160.1 pm. [SO(NPPh₃)₂] : Space group P2₁/c, Z = 4, structure solution with 2854 observed unique reflections, R = 0.113. Lattice dimensions at ?50°C: a = 1173.1, b = 1585.6, c = 1619.2 pm, b? = 98.13°. The compound forms monomeric molecules, in which the positions of S and N atoms are disordered in two positions. The bond lengths are S? N 166 pm and P? N 163 pm in average. [SCl(NPMe₃)₂]Cl : Space group P1 , Z = 2, structure solution with 2416 observed unique reflections, R = 0.038. Lattice dimensions at 20°C: a = 613.2, b = 1030.3, c = 1111.4 pm, α = 88.48°, b? = 88.01°, γ = 83.10°. The compound forms ions [SCl(NPMe₃)₂]⁺ and Cl^?. In the cation the sulfur atom is ?-tetrahedrally coordinated with a long S? Cl distance of 246.9 pm and bond lengths S? N of 155.3 pm and P? N of 164.3 pm in average.     

[Cu4(NPMe3)3(O2C?CH3)5] – ein tetramerer Phosphaniminato-Komplex von Kupfer(II). Synthese,Kristallstruktur, magnetisches Verhalten und EPR-Spektrum

[Cu₄(NPMe₃)₃(O₂C? CH₃)₅] – a Tetrameric Phosphorane Iminato Complex of Copper(II). Synthesis, Crystal Structure, Magnetic Behaviour, and EPR Spectrum The title compound and the corresponding benzoate complex [Cu₄(NPMe₃)₃(O₂C? C₆H₅)₅] have been prepared by reactions of copper(II)acetate and copper(II)benzoate, respectively, with Me₃SiNPMe₃ in dichloromethane. Both complexes are characterized by IR spectroscopy. The acetate complex is additionally characterized by the measurement of the magnetic susceptibility, by its EPR spectrum, and by a crystal structure determination. [Cu₄(NPMe₃)₃(O₂C? CH₃)₅] · CH₂Cl₂: Space group I4₁/a, Z = 16, structure solution with 7 960 independent reflections, R = 0.044. Lattice dimensions at ?70°C: a = b = 3 670.6; c = 1 091.9 pm. The structure consists of four Cu atoms which are arranged at the corners of a distorted tetrahedron with Cu…?Cu distances between 290 and 318 pm. Three of the faces of the tetrahedron are linked by μ₃-N atoms of the phosphorane iminato groups. Three of the acetate ligands form chelates, the other two are monofunctionally coordinated. Three of the copper atoms have a planar surrounding, the forth Cu atom has a (4 + 1) coordination.     

Metallkomplexe von Phenylenbistriazeniden: Synthese und Kristallstrukturen von [Cp(CO)2M]2(1,2-PhN3C6H4N3Ph) (M = Mo,W)

Metal Complexes of Phenylenebistriazenides: Synthesis and Crystal Structures of [Cp(CO)₂M]₂(1,2-PhN₃C₆H₄N₃Ph) (M = Mo, W) [Cp(CO)₂M]₂(1,2-PhN₃C₆H₄N₃Ph) [(M = Mo( 1 ), M = W( 2 )] is formed in the reaction of Cp(CO)₃MCl with PhN₃(H)C₆H₄N₃(H)Ph and C₂H₅ONa in a THF/ethanol mixture. 1 crystallizes from toluene as dark red crystals (triclinic, P1 , a = 1 499.3(9) pm, b = 1 734.0(7) pm, c = 1 852.8(8) pm, α = 66.84(3)°, β = 78.25(4)°, γ = 77.19(4)°). The unit cell contains four complexes with two independent complexes in the asymmetric unit, and eight solvent molecules. 2 crystallizes from THF as yellow crystals free from solvent molecules (triclinic, P1 , a = 979.0(5) pm, b = 1 152.8(5) pm, c = 1 475.8(5) pm, α = 98.26(4)°, β = 104.93(4)°, γ = 101.03(4)°, Z = 2). 1 and 2 are discrete molecular complexes with a 1,2-bis(phenyltriazenido)phenylligand, (PhN₃C₆H₄N₃Ph)^2?, chelating the metal atoms of two Cp(CO)₂M units with the N atoms N1 and N3 of both N₃ groups. Due to the sterical pretension of the Cp(CO)₂M units the phenylenebistriazenido ligand deviates strongly from planarity that is found in the metal complexes characterized so far.     

Struktur und ausgewählte Reaktionen von ReCl4(PPh3)2

ReCl₄(PPh₃)₂ – Reactions and Structure The compounds ReCl₄(PPh₃)₂ and Re₂OCl₃(C₂H₅COO)₂(PPh₃)₂ resulting from the reaction of ReOCl₃(PPh₃)₂ with PPh₃ in boiling propionic acid and HCl atmosphere were characterized by their VIS-spectra and structural data. Ligand exchange reactions with acetylacetone gave ReCl₂(acac)₂ as well as ReCl₂(acac)(PPh₃)₂. Crystallographic data see “Inhaltsübersicht”.     

Sequential determination of Se(IV) and Se(VI) by flow injection-hydride generation-atomic absorption spectrometry with HCl/HBr microwave aided pre-reduction of Se(VI) to Se(IV)

In this study a flow injection (FI) system used in conjunction with hydride generation (HG), atomic absorption spectrometry (AAS) and microwave (MW) aided pre-reduction of selenite (Se(IV)) to selenate (Se(IV)) with HCl:HBr has been developed in order to differentiate both inorganic selenium species. As full control of the MW reduction step is possible, the experimental approach allows the use of milder acidic conditions (10% v/v of HCl and HBr) than those conventionally accomplished with hydrochloric acid alone (≥50% v/v). Experimental parameters were optimized by the univariate optimization method. In either case, the linear range was from 1.0 to 30 μg l⁻¹. The detection limits based on 3σ of the blank signal were 0.25 μg l⁻¹ for Se(IV) and 0.30 μg l⁻¹ for Se(VI). The reproducibility, about 3% RSD and recoveries of different amounts of Se(VI) and Se(IV) added to water and orange juice samples (97–103%) were good. The main advantage of the proposed method is that the sequential determination of Se(IV) and Se(VI) is performed at a high sampling frequency (ca. 50 samples per h) in a closed system without Se losses, and with a minimum sample waste, operator attention, and sample manipulation.     

Synthesis and Surface Activity of Anionic Gemini Surfactants with Alkyl Spacers

A series of anionic Gemini surfactants called alkanediyl-α,ω-bis(m-octylphenoxy sulfonate) with different length of (CH₂)_x spacer, C₈C_xC₈ (x = 2, 4, 6, 8), have been synthesized from 4-n-octylphenol and their basic physicochemical properties are investigated. The results indicate that they are different from cationic Gemini surfactants called alkanediyl-α,ω-bis(dimethyldodecylammonium bromide), 12-(CH₂)_s-12, in the literature. It is found that as the carbon atom number of the spacer increases, the cmc (critical micelle concentration) decreases gradually, and the surface area per molecule (A_min) decreases initially and then increases. The breakpoints appear at number 4 of carbon atom in the spacer. Though the length of the spacer is different for the Gemini surfactants from C₈C₂C₈ to C₈C₆C₈, there is no obvious change on the micropolarity.     

Separation,preconcentration and speciation of chromium by solid phase extraction on immobilised ferron

A sensitive and simple method for determination of chromium species after separation and preconcentration by solid phase extraction (SPE) has been developed. For the determination of the total concentration of chromium in solution, Cr(VI) was efficiently reduced to Cr(III) by addition of hydroxylamine and Cr(III) was preconcentrated on a column of immobilised ferron on alumina. The adsorbed analyte was then eluted with 5?mL of hydrochloric acid and was determined by flame atomic absorption spectrometery. The speciation of chromium was affected by first passing the solution through an acidic alumina column which retained Cr(VI) and then Cr(III) was preconcentrated by immobilised ferron column and determined by FAAS. The concentration of Cr(VI) was determined from the difference of concentration of total chromium and Cr(III). The effect of pH, concentration of eluent, flow rate of sample and eluent solution, and foreign ions on the sorption of chromium (III) by immobilised ferron column was investigated. Under the optimised conditions the calibration curve was linear over the range of 2–400?µg?L^?1 for 1000?mL preconcentration volume. The detection limit was 0.32?µg?L^?1, the preconcentration factor was 400, and the relative standard deviation (%RSD) was 1.9% (at 10?µg?L^?1; n?=?7). The method was successfully applied to the determination of chromium species in water samples and total chromium in standard alloys.     

O-Alkyl Trithiophosphate Derivatives of Triorganotin(IV) and S-Alkyl Trithiophosphate Derivatives of Diorganotin(IV) Chloride

Reactions of triorganotin chlorides with potassium salt of O-alkyl trithiophosphate [ROP(S)(SK)₂; R = Me, Prⁱ, Ph] in 2:1 molar ratio in anhydrous benzene yield triorganotin O-alkyl trithiophosphate of the type ROP(S) [SSnR′₃]₂ R = Me, Prⁱ; Ph, R′ = Prⁿ, Buⁿ, Ph] which are found to be monomeric in nature. These complexes are soluble in common organic solvents. Similar reactions of diorganotin chloride with dipotassium salt of S-alkyl trithiophosphate yield diorganotin-S-alkyl trithiophosphate of the type [(RS)P(O)S₂]₂SnR′₂; R = Me, Prⁱ; R′ = Me, Et, Ph, which also are found to be monomeric in nature and are soluble in common organic solvents. The newly synthesized derivatives have been characterized by physicochemical and spectroscopic techniques, IR, NMR (¹H, ³¹P, and ¹¹⁹Sn).     

用2D NMR研究锡配合物配体的交换反应

Two-dimensional 1H exchange spectroscopy was applied to study of the ligand exchange kinetics of the complex [Sn2(μ-OH)2Cl6(DMF)2]•4DMF in DMF-d7 solution. The exchange rate constants for the ligand H2O and DMF between free and coordination states were evaluated.