Multi-Residue Analysis of Some Polar Pesticides in Water Samples with SPE and LC–MS–MS

In the present study a multi-residue analytical method was developed for monitoring some polar pesticides such as acephate, methamidophos, carbofuran, isoproturon, dimethoate in water with SPE (solid-phase extraction) and LC–MS–MS. Acetochlor was taken as surrogate, and alachlor as internal standard. SPE with different types of columns was compared with LLE (liquid-liquid extraction). Further, the breakthrough volume for different pesticides was determined. The results showed that the selected pesticides can be determined very sensitively with LC–MS–MS. The minimum detectable quantity (MDQ) for each pesticide was about 1.0 ng. To date, SPE cartridge studies showed that the Oasis HLB cartridges were suitable for further studies. However, for Oasis HLB cartridge, different pesticide showed different breakthrough volume. The results showed that for acephate and methamidophos, the breakthrough volume was about 30 mL of water sample, much less than the breakthrough volume of other pesticides studied. Because of the higher vapor pressure and higher Henry's constant of methamidophos, dimethoate and carbofuran, much attention should be paid on their losses in the evaporation step of the experiment. This analytical method can be applied to determine pesticide contamination in environmental water samples. Revised: 12 September 2005 and 21 October 2005     

自动固相微萃取(SPME)GC-MS、GC-MS-MS法检测环境水中有机磷杀虫剂的研究

固相微萃取(solid-phasemicroextraction,SPME)是20世纪90年代发展起来的一种样品前处理技术,与传统的液-液提取、液-固提取相比,SPME更适用于提取、浓缩液态或气态的挥发性和半挥发性物质,SPME技术可将采样、萃取、浓缩和样本引入集中于一个步骤完成,尤其随着自动SPME与GC-MS等联用技术的日益完善,使SPME技术优点得到更充分的发挥。     

Retention behavior and solvent optimization of organochlorine pesticides in solid-phase extraction

Summary Plots of capacity factor and retention time vs. elution solvent composition were proved to be useful to interpret the retention behavior of Kepone and its metabolites in a reversed-phase solid-phase extraction and to optimize the elution solvent. The percent recovery of Kepone was largely improved when the solvent was optimized. The standard deviations of the results of extractions were also improved upon the optimization of the solvent.     

Rapid clean-up of fat extracts for organophosphorus pesticide residue determination using C18 solid-phase extraction cartridges

Commercial solid-phase extraction (SPE) cartridges with C₁₈ bonded silica packings effectively cleaned up acetonitrile extracts of 3-g samples of fats and oils for determination of organophosphorus pesticide residues by gas chromatography with flame photometric detection. Cartridges from three different sources were tested and found to differ in lipid capacity and inertness (free silanol activity). Consequently, the amount of packing (i.e., number of cartridges) and/or the choice of eluent used were adjusted for each brand of cartridge to achieve optimum clean-up and analyte recovery. Seven pesticides with a wide range of polarity (acephate, azodrin, chlorpyrifos, diazinon, malathion, methamidophos and methyl parathion) were separated from coextracted lipids by elution with either acetonitrile or methanol, depending on the brand of cartridge used. Cartridges were regenerated by purging lipids with dichloromethane and were reused numerous times without apparent loss of effectiveness. Recoveries from vegetable oils and butterfat fortified with the seven compounds at levels of 0.05–0.87 μg g^?1 ranged from 80 to 103%. Practical limits of determination range from 0.01 to 0.08 μg g^?1, depending on analyte response.     

Use of Extraction Disks for Trace Enrichment of Various Pesticides from River and Sea Water Samples

Abstract

C-18 Empore extraction disks were used for the isolation and trace enrichment of different groups of pesticides from river water and artificial sea water at concentration levels of 0.2, 5 and 20 μg/l [chlorotriazines, (atrazine and simazine), their dealkylated metabolites, (deethyl- and deisopropylatrazine), organophosphorus (parathion-ethyl), phenylurea (linuron), anilide (propanil), carbamate (aldicarb and carbofuran) and carbamate transformation products (aldicarb sulfoxide, aldicarb sulfone and 3-hydroxy-7-phenol carbofuran]. The extraction disks allowed high flow rates thus 51 samples could be processed within 2h. 30 min.

For most of the pesticides the recoveries, as determined by liquid chromatography with diode array detection (LC-DAD), varied from 74 up to 125% with coefficients of variations (CV) of 5-10%, whereas for the carbamate transformation products the recoveries were in the range of 30-35% having a CV of 17-21%. At spiking level of 0.2 μg/l the dealkylated triazine metabolites and the carbamate transformation products were not detected at all.     

Application of microwave-assisted micellar extraction combined with solid-phase microextraction and high-performance liquid chromatography with UV detection for the determination of organochlorine pesticides in different mud samples

Abstract

A sequential injection analysis method for the simultaneous spectrophotometric determination of phosphate and silicate has been developed. The method is based on the different reaction rates of the heteropolymolybdate formation reactions. Concentrations within the range 0.026—0.485 mmol P l^?1 and 0.125—2.848 mmol Si l^?1 have been determined at a frequency of 30 samples per hour. An R.S.D. of 2.1% was obtained for 0.162 mmol P l^?1 and of 1.1% for 1.424 mmol Si l^?1. The method was found to be suitable for the determination of phosphate and silicate in wastewater.     

Multi-Residue Analysis by Liquid Chromatography-Mass Spectrometry Coupling. Application to Drinking and River Waters

Abstract

The coupling between liquid chromatography and mass spectrometry with an APCI or ESI interface (in positive or negative mode) is used here for multi-residue analyses in natural waters, covering basic and neutral pesticides as well as acid pesticides. The methods developed are applied to drinking and, river waters after the samples are concentrated by liquid-liquid extraction or solid phase extraction on C18 cartridges. Comparisons are made between UV detection and mass spectrometry and between two chromatographic methods for acid substances. The quantitation limits range from 0.01 to 0.1 μg/l according to the substance.     

Nuklearpharmaka — Ihre Entwicklung,Präparation und Anwendungsmöglichkeiten

Radioaktiv markierte Präparate haben in denletzten Jahren in schnell zunehmendem Maße Eingang in die klinische Medizin gefunden. Sie sind beieiner Reihe von Indikationen schon jetzt außerordentlich wertvolle Hilfsmittel bei der Diagnose, besonders bei der Prüfung von Organfunktionen.     

A combination of dispersive liquid–liquid microextraction and surface plasmon resonance sensing of gold nanoparticles for the determination of ziram pesticide

We have developed a reliable, fast, and highly sensitive analytical method utilizing dispersive liquid–liquid microextraction and gold nanoparticles probes for ziram (zinc bis(dimethyldithiocarbamate)) determination. The method is based on the in situ formation of gold nanoparticles in carbon tetrachloride as an organic phase. It was found that the trace levels of ziram influenced the formation of gold nanoparticles, leading to absorbance change of a sedimented phase. The results of the colorimetric ziram determination were in the concentration range of 0.12–2.52 ng/mL with a limit of detection of 0.06 ng/mL. The formation of the stable and dispersed gold nanoparticles in the organic phase provides a good precision for dispersive liquid–liquid microextraction method, resulting in the relative standard deviation of 3.8 and 1.2% for 0.56 and 1.58 ng/mL of ziram, respectively. This method has been successfully used for the ziram determination in samples of well and river water, soil, potato, carrot, wheat, and paddy soil.