Acoustic-electromagnetic slow waves in a periodical defective piezoelectric slab

Coupled slow waves, slow acoustic waves, and electromagnetic waves are simultaneously achieved based on a piezoelectric material, in which a line defect is created within a honeycomb lattice array of cylindrical holes etched in a LiNbO_3 slab. Finite element simulations in frequency domain and time domain demonstrate that a highly localized slow mode is obtained in the defect. Owing to the piezoelectricity of LiNbO_3, acoustic and electromagnetic waves are coupled with each other and transmit along the line defect. Therefore, in addition to a slow acoustic wave, an electromagnetic wave with a group velocity even lower than conventional acoustic waves is achieved.     

Integer linear programming formulation of the material requirements planning problem

Lot sizing procedures for discrete and dynamic demand form a distinct class of inventory control problems, usually referred to asmaterial requirements planning. A general integer programming formulation is presented, covering an extensive range of problems: single-item, multi-item, and multi-level optimization; conditions on lot sizes and time phasing; conditions on storage and production capacities; and changes in production and storage costs per unit. The formulation serves as a uniform framework for presenting a problem and a starting point for developing and evaluating heuristic and tailor-made optimum-seeking techniques.     

Improvement of real time diffraction efficiency of NGD holograms by introducing electron donors

Nongelatin dichromated holographic film(NGD) is a new holographic recordingmaterial.Holograms recorded on this material have better environmental stability, higherdiffraction efficiency and stronger real time effect, etc..An experimental study to ascertainthe influence of two electron donors, namely,N,N-dimethylformamide(DMF) and dimethyl-sulfoxide(DMSO),on the real time diffraction efficiency(RTDE) of NGD holograms is car-ried out.The pressence of electron donors not only improves the sensitivity,but also enhancesthe real time effect greatly.RTDE of above 60% at±1 orders of NGD plane transimissiongrating is achieved by introducing electron donors.     

γ-辐照对纯Y_2SiO_5和Eu~(3+)∶Y_2SiO_5晶体光谱性能的影响

研究了γ-辐照前后纯Y2SiO5和Eu3+掺杂的Y2SiO5晶体吸收光谱的变化,辐照后,未退火和氢气退火的纯Y2SiO5晶体在260~270 nm和320 nm波段产生了附加吸收峰,分别是由F心和O-心的吸收引起的;经过空气退火的纯YSO晶体中,由于消除了氧空位,因此辐照后没有出现色心吸收峰。在Eu3+∶Y2SiO5晶体中,不但有相同的F心和O-心吸收峰,而且还有Eu2+离子在300 nm和390 nm的吸收峰。随着辐照剂量的增加,色心附加吸收峰增强。空气退火能减少Eu3+∶Y2SiO5晶体中的色心,而氢气退火能增加色心。     

Radiator design for detecting high-energy neutrons with a nuclear track detector

Subsequent to the proposal of a two-layer structured radiator for more efficient detection of high-energy neutrons with a plastic nuclear track detector (PNTD), its availability has been investigated both experimentally and theoretically. An inner deuterized hydrocarbon (CD₂) layer adjacent to PNTD should play the role of both a radiator of deuterons recoiled there and a degrader for energetic protons recoiled in the outer layer of a CH₂ material. It was found that the energy dependence of the efficiency was changed sensitively by the thickness of the CD₂ layer. A best combination of CH₂ and CD₂ thickness was estimated under a condition of a constant total thickness. For example, the sensitivity could be flattened within 20% between about 5 and 70 MeV by using -CD₂ and -CH₂.     

Temporal behavior of low-amplitude dark spatial solitons in two-photon centrosymmetric photorefractive media

We investigate the temporal behavior of low-amplitude dark spatial solitons in biased centrosymmetric crystals with two-photon photorefractive effects. The expressions of time-dependent space-charge field and dynamical evolution equation are derived. The temporal behaviors of the intensity profiles and the intensity full width at half maximum (FWHM) of dark solitons are investigated by numerical method. The results indicate that a broad soliton is generated at the beginning, and as time evolves, the intensity width of solitons decrease monotonously to a minimum value toward steady state. Within the same propagation time, the higher the ratio of soliton peak intensity to the dark irradiation intensity is, the shorter the FWHM of dark solitons is.     

CeO_2负载多孔碱激发钢渣基催化剂的制备及其光催化性能

固体废弃物高附加值利用是资源可持续发展的重要途径之一,创新性的提出了以丙烯酸树脂乳液为孔形成剂,对碱激发钢渣基胶凝材料的孔结构进行调变,制备出新型多孔碱激发钢渣基胶凝材料,采用初湿浸渍法合成了一种新型的CeO_2负载的多孔钢渣基催化剂。利用XRF,XRD,BET,UV-Vis DRS等手段对光催化剂的组成、结构及光谱性能进行了表征,评价了其光催化分解水制氢活性。结果表明:孔形成剂的加入,改变了碱激发钢渣基胶凝材料的孑L结构,其介孔体积增加了70.27%,负载8 Wt%CeO_2的光催化剂介孔体积增加了144.14%。在模拟太阳光源辐照6 h后,负载8 Wt%CeO_2的光催化剂的最高产氢活性(7 653μmol·g~(-1))和产氢速率[1 275.5μmol·(g·h)~(-1)]归因于介孔体积增加了水分子的传质速率以及高分散的CeO_2活性组分与载体中FeO形成的耦合半导体促进了光生电子-空穴对的高效分离。     

铁磁材料磁化曲线的智能观测系统

利用单片机系统控制物理实验过程，智能地测绘起始磁化曲线和磁滞回线，从而使学生们看到完整的磁化过程，对铁磁物质的磁滞现象有个充分的认识。     

掺Eu3+硅基材料的发光性质

通过溶胶－凝胶技术制备了掺Eu^3 的硅基材料并测试了其三维荧光光谱、激光谱和发射光谱，结果显示，最佳激发波波长为350nm,最强荧光波长为620nm；在350nm光激发下的发射光谱显示Eu^3 的特征发射光谱，产生4条谱带，分别是577nm(^5D0-^7F0)，588nm(^5D0-^7F1),596nm(^5D0-^7F1)和610nm(^5D0-^7F2)。     

长余辉发光材料的紫外-可见反射光谱测定

用“湿法”制备了长余辉发光材料,原料通过水溶液液相分子水平上的均匀混合,利用金属硝酸盐和有机还原剂在较低的温度下发生氧化还原燃烧反应,一步快速生成产品。加热起燃温度低至500℃,反应时间短,所制得的产品成份均匀,晶粒小,外观呈蓬松状态,易研磨粉碎,粉体表观密度小。以紫外－可见分光光度计测定分析了所制备样品在蓄光前后的反射光谱特征并作了探讨。结果表明,除表观密度外,“显法”与“干法”制备的长余辉发光材料的主要性质相同,紫外－可见反射光谱可以准确描述长余辉发光材料的紫外－可见光谱性能特征。