有机-无机纳米复合材料光谱与电子性质研究进展

有机-无机纳米复合材料的研究在当前纳米科学技术的发展中占有重要地位，开创了材料与催化科学研究的新纪元。自从10年前首次合成纳米孔无机材料MCM-41至今，该领域研究不断深入，已展现出广阔的应用前景。当客体有机分子分散于纳米孔道内部时，其分子性质将产生明显变化。本文结合作者近期研究成果，力图从实验与理论两方面阐明在纳米复合体系中客体分子性质变化的原因。     

Synthesis of the composite material of polyaniline/NiO/sodium dodecylbenzenesulfonate in micelles

The composite material of polyaniline/NiO/sodium dodecylbenzenesulfonate (SDBS) is synthesized in SDBS micelles. The composite material has satisfactory conductivity and thermostability, and the particle length, width, and thickness are about 200–500 m, 3–5 m, and 40–96 nm, respectively.     

Application of high resolution ICP-spectrometry to the determination of B,Be, Co,Mo and Sn in soils and similar matrices

The most sensitive emission lines for the elements B, Be, Co and Mo are strongly influenced by disturbing emission lines of Fe using normal optical resolution. The advantages of high resolution, applying the new ICP-spectrometer JY 38 Plus (Jobin-Yvon, France) with the 2400 lines/mm grating measuring in the 1st and 2nd order will be discussed. Beside the concentrations in soils, sediments and sludges, applying aqua regia and HF decomposition methods, the detection limits in these matrices will be given. The possibilities of ICP-spectrometry for the determination of the above-mentioned elements are shown at the examples of SRMs (standard reference materials). The materials used here were three soils and three sludges from the BCR (Community Bureau of Reference, European Communities) and one sediment from NBS (National Bureau of Standards, USA). For example, the most sensitive and normally used line for the determination of boron at 249.7733 nm cannot be used in case of this type of matrix due to normally high Fe-concentrations and due to a strong Fe-interference. Therefore, it is necessary to use the line at 249.6778 nm, where an interference-free measurement can be achieved in case of high optical resolution. The measured B-contents in these samples are in the range of 20 to 60 g/g, for Co in the 10 g/g region, for Be well below 1 g/g, for Sn between 3 and 400 g/g. Mo was only detectable in the sludge samples (limit of determination 0.5 g/g).Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

The circular chemistry conceptual framework: A way forward to sustainability in industry 4.0

1. Download : Download high-res image (233KB)
2. Download : Download full-size image

     

Perfluoro-1,3,5-tris(p-oligophenyl)benzenes: Amorphous Electron-Transport Materials with High-Glass-Transition Temperature and High Electron Mobility

Perfluoro-1,3,5-tris(p-quaterphenyl)benzene (PF-13Y) and perfluoro-1,3,5-tris(p-quinquephenyl)benzene (PF-16Y) have been synthesized and characterized. They showed higher glass transition temperatures compared with perfluoro-1,3,5-tris(p-terphenyl)benzene (PF-10Y). Organic light-emitting diodes were fabricated using these materials as the electron-transport layers. PF-13Y and -16Y are better electron transporters than PF-10Y. The electron mobilities of PF-10Y and Alq₃ were measured by the time-of-flight technique. PF-10Y showed higher electron mobilities (10⁻⁴ cm²/V s) and weaker electric field dependence compared with Alq₃.     

Preparation of nickel-mesoporous materials and their application to the hydrodechlorination of chlorinated organic compounds

Mesoporous materials have attracted considerable attention for use as a catalyst or a catalyst support due to their remarkable textural properties such as high surface area and large pore volume with a narrow pore size distribution. Many efforts have been made to design mesoporous materials for use in heterogeneous catalyst systems. Recent progress and results regarding the preparation of nickel-mesoporous materials and their application to the hydrodechlorination of chlorinated organic compounds were discussed in this review. Mesoporous materials were used as a support for nickel catalyst or a nickel-incorporated mesoporous catalytic material in this work. Two research areas were described and discussed in this review. One is the preparation of mesoporous alumina-supported nickel catalysts and their application to the hydrodechlorination of 1,2-dichloropropane and o-dichlorobenzene. The other is the preparation of mesoporous silica-supported nickel catalysts and their application to the hydrodechlorination of 1,1,2-trichloroethane and chlorobenzene.     

Kinetics parameters in Mg2SiO4:Tb thermoluminescent material

This paper reports a first approach on the kinetics parameters of terbium-activated magnesium orthosilicate using various methods. A deconvolution has also used for taking into account a more complex glow-curve structure.

---

Zusammenfassung Mittels verschiedener Methoden werden in erster Näherung die kinetischen Parameter von terbiumaktiviertem Magnesiumorthosilikat ermittelt Zur Berücksichtigung einer komplexeren Thermolumineszenzkurve wurde auch eine Dekonvolution angewendet.

     

Two new standard reference materials for the determination of drugs of abuse in human hair

Two new standard reference materials (SRM) for drugs of abuse in human hair have been developed. SRM 2379 consists of hair spiked with cocaine, benzoylecgonine, cocaethylene, phencyclidine, amphetamine, and methamphetamine. SRM 2380 consists of hair spiked with codeine, morphine, monoacetylmorphine, and tetrahydrocannabinol (THC). The SRMs were prepared by soaking the hair in a solution of the target analytes in water-dimethylsulfoxide. The concentration of each analyte was determined using two methods, one based upon gas chromatography/mass spectrometry (GC/MS) and one based upon liquid chromatography/mass spectrometry (LC/MS). Both methods used 0.1 M HCl for extraction of all the analytes from the hair, except for THC, which was extracted with 1 M NaOH. For isolation of the analytes from the extracts, the GC/MS-based methods used different clean-up procedures from those used for the LC/MS-based methods. The results from the two methods were in good agreement with mean differences for the analytes ranging from 4% to 16%. These materials will enable laboratories performing analyses of hair for drugs of abuse to test the accuracy of their methods.     

Development of B‐doped Si multiple delta‐layer reference materials for SIMS profiling

B‐doped Si multiple delta‐layers (MDL) were developed as certified reference materials (CRM) for secondary ion mass spectrometry (SIMS) depth profiling analysis. Two CRMs with different delta‐layer spacing were grown by ion beam sputter deposition (IBSD). The nominal spacing of the MDL for shallow junction analysis is 10 nm and that for high energy SIMS is 50 nm. The total thickness of the film was certified by high resolution transmission electron microscopy (HR‐TEM). The B‐doped Si MDLs can be used to evaluate SIMS depth resolution and to calibrate the depth scale. A consistency check of the calibration of stylus profilometers for measurement of sputter depth is another possible application. The crater depths measured by a stylus profilometer showed a good linear relationship with the thickness measured from SIMS profiling using the calibrated film thickness for depth scale calibration. The sputtering rate of the amorphous Si thin film grown by sputter deposition was found to be the same as that of the crystalline Si substrate, which means that the sputtering rate measured with these CRMs can be applied to a real analysis of crystalline Si. Copyright © 2005 John Wiley & Sons, Ltd.     

New and novel organic-inorganic type crystalline ‘polypyrrolel/polyantimonic acid’ composite system: preparation, characterization and analytical applications as a cation-exchange material and Hg(II) ion-selective membrane electrode

A new phase of ‘organic-inorganic’ composite system, polypyrrole polyantimonic acid, prepared by mixing the inorganic precipitate of hydrated antimony oxide with organic conducting polymer i.e., polypyrrole, providing a novel granular form hybrid cation-exchanger suitable for column operation with better chemical and thermal stability, good ion-exchange capacity, reproducibility and selectivity for heavy metals. The physicochemical properties of this material were studied using elemental analyses, AAS, SEM, XRD, FTIR and simultaneous TGA-DTA studies. Ion-exchange capacity, pH-titrations, elution and distribution behavior were also carried out to characterize the material. Distribution studies revealed the cation-exchange material to be highly selective for Hg(II) and its selectivity was performed by achieving some important binary separations like Hg²⁺-Zn²⁺, Hg²⁺-Ni²⁺, Hg²⁺-Cu²⁺, Hg²⁺-Fe³⁺, Hg²⁺-Cd²⁺, Hg²⁺-Mg²⁺ etc. on its column. Using this electroactive composite material, a new heterogeneous precipitate based selective ion-sensitive membrane electrode was fabricated for the determination of Hg(II) ions in solutions. The membrane electrode is mechanically stable, with a quick response time, and can be operated within a wide pH range. The selectivity coefficients for different cations determined by mixed solution method were found to be less than unity The electrode was also found to be satisfactory in electrometric titrations.