Synthesis and characterizations of anion exchange organic-inorganic hybrid materials based on poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)

A series of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)-based organic-inorganic hybrid materials for anion exchange were prepared through sol-gel process of polymer precursors PPO-Si(OCH₃)₃. PPO-Si(OCH₃)₃ were obtained from the reaction of bromomethylated PPO with 3-aminopropyl-trimethoxysilane (A1110). These polymer precursors then underwent hydrolysis and condensation with additional A1110 to generate hybrid materials. The reaction to produce polymer precursors was identified by FTIR; while FTIR, TGA, XRD, SEM, as well as conventional ion exchange capacity (IEC) measurements were conducted for the structures and properties of the prepared hybrids. TGA results show that this series of hybrid materials possess high thermal stability; XRD and SEM indicate that the prepared hybrid materials are amorphous and the inorganic and organic contents show good compatibility if the ratio between them is proper. The IEC values of the hybrid materials due to the amine groups range from 1.13 mmol/gBPPO (material i) to 4.80 mmol/gBPPO (material iv).     

Highly luminescent diyne (?CC?CC?) containing hybrid polyphenyleneethynylene/poly(p‐phenylenevinylene) polymer: Synthesis and characterization

Luminophoric dialdehyde 1,4‐bis[4‐formylphenylethynyl‐(2,5‐dioctadecyloxyphenyl)‐buta‐1,3‐diyne] ( 4 ) enables the synthesis of diyne‐containing hybrid polyphenyleneethynylene/poly(p‐phenylenevinylene) polymer poly[1,4‐phenylene‐ethynylene‐1,4‐(2,5‐dioctadecyloxy)phenylene‐butadi‐1,3‐ynylene‐1,4‐(2,5‐dioctadecyloxy)phenylene‐ethynylene‐1,4‐phenylene‐ethene‐1,2‐diyl‐1,4‐(2,5‐dioctadecyloxy)phenylene‐ethene‐1,2‐diyl] ( 7 ) with a well‐defined general structure (? Ph? C?C? Ar? C?C? C?C? Ar? C?C? Ph? CH?CH? Ar? CH?CH? )_n, which was confirmed by NMR and infrared spectroscopy. The highly luminescent material is thermostable, soluble in usual organic solvents through the grafting of octadecyloxy side groups, and can be processed into transparent films. With the aim to investigate the effect of ? C?C? C?C? in the photophysical behavior of 7 , a comparison of the photophysics of monomers 3 [1,4‐bis(4‐formylphenylethynyl)‐2,5‐dioctadecyloxybenzene] and 4 and subsequently of their respective polymers 6 and 7 has been carried out. Similar photophysical behaviors for 6 (poly[1,4‐phenylenethynylene‐1,4‐(2,5‐dioctadecyloxyphenylene)ethene‐1,2‐diyl]) and 7 were observed in dilute CHCl₃ solution as a result of an identical chromophore system responsible for the absorption (λ_a = 448 nm) and emission (λ_f = 490 nm) in both compounds. The increased planarization and enhanced rigidity of the conjugated backbone in the solid state at room temperature as well as in frozen dilute tetrahydrofuran solution at 77 K cause the bathochromic shift of the absorption and emission spectra. The large octadecyloxy side chains obviously limit strong π‐π interchain interactions in the solid films, which explains the high fluorescence quantum yields of 35 and 52% obtained for 6 and 7 , respectively. The energetically arduous migration of the π electron through the diyne units not only requires a higher threshold voltage for the detection of photoconductivity in 7 but could possibly limit radiationless deactivation channels of the exciton, which explains the approximate 20% fluorescence quantum yields difference between 6 and 7 in the solid state. The electron‐withdrawing effect of the triple bonds confer both 6 and 7 with a good electron‐accepting property (E^ox = 1.39 V vs Ag/AgCl) if used in light‐emitting diode devices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2670–2679, 2002     

Reversible anion exchanges between the layered organic-inorganic hybridized architectures: syntheses and structures of manganese(II) and copper(II) complexes containing novel tripodal ligands

Six noninterpenetrating organic-inorganic hybridized coordination complexes, [Mn(3)(2)(H(2)O)(2)](ClO(4))(2).2 H(2)O (5), [Mn(3)(2)(H(2)O)(2)](NO(3))(2) (6), [Mn(3)(2)(N(3))(2)].2 H(2)O (7), [Cu(3)(2)(H(2)O)(2)](ClO(4))(2) (8), [Mn(4)(2)(H(2)O)(SO(4))].CH(3)OH.5 H(2)O (9) and [Mn(4)(2)](ClO(4))(2) (10) were obtained through self-assembly of novel tripodal ligands, 1,3,5-tris(1-imidazolyl)benzene (3) and 1,3-bis(1-imidazolyl)-5-(imidazol-1-ylmethyl)benzene (4) with the corresponding metal salts, respectively. Their structures were determined by X-ray crystallography. The results of structural analysis of complexes 5, 6, 7, and 8 with rigid ligand 3 indicate that their structures are mainly dependant on the nature of the organic ligand and geometric need of the metal ions, but not influenced greatly by the anions and metal ions. While in complexes 9 and 10, which contain the flexible ligand 4, the counteranion plays an important role in the formation of the frameworks. Entirely different structures of complexes 5 and 10 indicate that the organic ligands greatly affect the structures of assemblies. Furthermore, in complexes 5 and 6, the counteranions located between the cationic layers can be exchanged by other anions. Reversible anion exchanges between complexes 5 and 6 without destruction of the frameworks demonstrate that 5 and 6 can act as cationic layered materials for anion exchange, as determined by IR spectroscopy, elemental analyses, and X-ray powder diffraction.     

Elaboration and characterization of hybrid organic-inorganic gels obtained by reaction of 1,4-butanediol on tetramethoxysilane

New hybrid organic-inorganic gels have been obtained by reaction of 1,4-butanediol, on tetramethoxysilane Si(OMe)₄ dissolved in CCl₄. This reaction does not require water and leads to the formation of polymeric transparent materials.Infrared, ²⁹Si and ¹³C NMR spectroscopy shows that interchange reactions between OMe groups of alkoxide and -O-(CH₂)₄-O of 1,4-butanediol occurred, leading to the monolithic transparent gels in which both organic (Si-O-(CH₂)₄-O-Si) and inorganic (Si-O-Si) bridges are formed.     

The intersection marker method for 3D interface tracking of deformable surfaces in finite volumes

Currently, the majority of computational fluid dynamics (CFD) codes use the finite volume method to spatially discretise the computational domain, sometimes as an array of cubic control volumes. The Finite volume method works well with single‐phase flow simulations, but two‐phase flow simulations are more challenging because of the need to track the surface interface traversing and deforming within the 3D grid. Surface area and volume fraction details of each interface cell must be accurately accounted for, in order to calculate for the momentum exchange and rates of heat and mass transfer across the interface. To attain a higher accuracy in two‐phase flow CFD calculations, the intersection marker (ISM) method is developed. The ISM method is a hybrid Lagrangian–Eulerian front‐tracking algorithm that can model an arbitrary 3D surface within an array of cubic control volumes. The ISM method has a cell‐by‐cell remeshing capability that is volume conservative and is suitable for the tracking of complex interface deformation in transient two‐phase CFD simulations. Copyright © 2015 John Wiley & Sons, Ltd.     

Organo-Polyoxometalate-Based Hydrogen-Bond Catalysis

Several urea-inserted organo-polyoxometalates (POMs) derived from polyoxotungstovanadate [P₂V₃W₁₅O₆₁]⁹⁻ were prepared. The insertion of the carbonyl into the polyoxometallic framework activates the urea toward Hydrogen-bond catalysis. This was shown on the Friedel-Crafts arylation of trans-β-nitrostyrene. Modelling shows that the most stable form of the organo-POMs features a cis-trans arrangement of the two N−H bonds, but that the likely catalytically active trans-trans form is accessible at room temperature. Finally, it is possible that the oxo substituents next to the vanadium atoms may help the approach of the nucleophile via H-bonding.     

The Efficient K Ion Storage of M2P2O7/C (M=Fe,Co, Ni) Anode Derived from Organic-Inorganic Phosphate Precursors

Metal phosphates have been widely explored in lithium ion batteries and sodium ion batteries owing to high theoretical capacities, mild toxicity and low cost. However, their potassium ion battery applications are less reported due to the limited conductivity and the slow diffusion kinetics. Considering these drawbacks, novel structured M₂P₂O₇/C (M=Fe, Co, Ni) nanoflake composites are prepared through an organic-phosphors precursor-assisted solvothermal method and a subsequent high temperature annealing process. The designed Co₂P₂O₇/C composite exhibits the highest rate capacity with 502 mAh g⁻¹ at 0.1 A g⁻¹ and good cyclability for 900 cycles at 1 A g⁻¹ and 2 A g⁻¹ when compared with Ni and Fe based composites. The superior electrochemical performance can be attributed to their unique nanoparticle-assembled nanoflake structure, which can afford enough active sites for K⁺ intercalation. In addition, the robust pyrophosphate crystal structure and the in situ formed carbon composition also have positive effects on enhancing the long-term cycling performance and the electrode's conductivity. Finally, this organic-phosphors precursor induced simple approach can be applied for easy fabrication of other pyrophosphate/carbon hybrids as advanced electrodes.     

Efficient stochastic FEM for flow in heterogeneous porous media. Part 1: random Gaussian conductivity coefficients

This paper is concerned with the development of efficient iterative methods for solving the linear system of equations arising from stochastic FEMs for single‐phase fluid flow in porous media. It is assumed that the conductivity coefficient varies randomly in space according to some given correlation function and is approximated using a truncated Karhunen–Loève expansion. Distinct discretizations of the deterministic and stochastic spaces are required for implementations of the stochastic FEM. In this paper, the deterministic space is discretized using classical finite elements and the stochastic space using a polynomial chaos expansion. The highly structured linear systems which result from this discretization mean that Krylov subspace iterative solvers are extremely effective. The performance of a range of preconditioned iterative methods is investigated and evaluated in terms of robustness with respect to mesh size and variability of the conductivity coefficient. An efficient symmetric block Gauss–Seidel preconditioner is proposed for problems in which the conductivity coefficient has a large standard deviation.The companion paper, herein, referred to as Part 2, considers the situation in which Gaussian random fields are transformed into lognormal ones by projecting the truncated Karhunen–Loève expansion onto a polynomial chaos basis. This results in a stochastic nonlinear problem because the random fields are represented using polynomial chaos containing terms that are generally nonlinear in the random variables. Copyright © 2013 John Wiley & Sons, Ltd.     

The Use of Derivative Thermogravimetry to Estimate Degree of Thermal Degradation

It is difficult to estimate the degree of thermal degradation which has taken place in complex parts composed of cellulosics and polymeric insulation unless complete failure has occurred. There is a definite need for a parameter which can quickly and easily measure the relative degree of thermal attack on organic insulation subjected to various known environmental and processing conditions. This paper reports preliminary work using derivative thermogravimetry to perform this function. Derivative thermogravimetric analysis (TGA) was used to produce a value, TGA Index, related to the peak height of the major TGA derivative signal. This TGA Index was found to correlate with the copper number of insulating paper measured after thermal degradation. The application of TGA Index to evaluation of polymer degradation after thermal shock, water absorption, and accelerated UV attack is also discussed. Finally, preliminary studies on the use of derivative TGA to evaluate coatings exposed to various outdoor environments around the country are reported.     

Functional Monomers and Polymers. 145. Synthetic Application Based on the Tautomerism of Polymer-Bound Purine and Pyrimidine Bases

Polymer-bound alkylthiopurine and -pyrimidine bases were prepared and used as the polymeric reagents for the reactions of nitrile, olefin, and enone formation. The corresponding low molecular weight compounds were also prepared for comparison. Differences in the reactivity of these reagents were related to the change in tautomerism of the purine and pyrimidine moieties.