Urea Detection of Electrochemical Transistor Sensors based on Polyanline (PANI)/MWCNT/Cotton Yarns

A cotton yarn biosensor based on electrochemical transistor functionalized with MWCNT and PANI was developed for the detection of urea. The transistors based on PANI/MWCNT/cotton yarns under optimized MWCNT concentration has been obtained, which exhibited high on/off current ratio, fast response time, and good operational stability. A transistor-based urea sensor was prepared from PANI/MWCNT/cotton yarns, which could monitor urea in the 1 nM–1 mM linear range with the correlation coefficient of 0.9716. Furthermore, the sensor showed superior reproducibility and high specificity. The practical applications of the proposed sensor were also confirmed. These results indicate the flexible transistor can be used as an efficient platform for biological detection in body fluids.     

Dielectric properties and study of AC electrical conduction mechanisms by non-overlapping small polaron tunneling model in Bis(4-acetylanilinium) tetrachlorocuprate(II) compound

In the present work, the synthesis and characterization of the Bis(4-acetylanilinium) tetrachlorocuprate(II) compound are presented. The structure of this compound is analyzed by X-ray diffraction which confirms the formation of single phase and is in good agreement the literature. Indeed, the Thermo gravimetric Analysis (TGA) shows that the decomposition of the compound is observed in the range of 420–520 K. However, the differential thermal analysis (DTA) indicates the presence of a phase transition at T=363 k. Furthermore, the dielectric properties and AC conductivity were studied over a temperature range (338–413 K) and frequency range (200 Hz–5 MHz) using complex impedance spectroscopy. Dielectric measurements confirmed such thermal analyses by exhibiting the presence of an anomaly in the temperature range of 358–373 K. The complex impedance plots are analyzed by an electrical equivalent circuit consisting of resistance, constant phase element (CPE) and capacitance. The activation energy values of two distinct regions are obtained from log σT vs 1000/T plot and are found to be E=1.27 eV (T<363 K) and E=1.09 eV (363 K<T).The frequency dependence of ac conductivity, σ_ac, has been analyzed by Jonscher's universal power law σ(ω)=σ_dc+Aω^s. The value of s is to be temperature-dependent, which has a tendency to increase with temperature and the non-overlapping small polaron tunneling (NSPT) model is the most applicable conduction mechanism in the title compound.     

非平衡溶剂化新理论在有机染料电子光谱中的应用

总结了非平衡溶剂化新理论和在量子化学软件Q-Chem中基于含时密度泛函理论(TD-DFT)实现溶剂效应下计算电子吸收和发射光谱的数值解方法.采用该方法计算了染料敏化太阳能电池(DSSCs)中三苯胺型有机染料■在真空和乙腈溶剂中的电子结构与光谱性质,研究发现,π共轭桥上碳碳双键的个数和溶剂效应会促进光电转换.     

多元杂环萘二酰亚胺衍生物的合成及其场效应性能研究

杂环修饰的萘二酰亚胺(NDI)类化合物由于其独特的光电性能被研究人员广泛关注,并应用于有机场效应晶体管(OFETs)、有机太阳能电池中(OSCs)、传感器等领域。但是含有给受体单元的多元杂环萘二酰亚胺衍生物的合成并不容易,本文通过简单高效的方法设计合成了含有氮、硫原子的11个杂环类萘二酰亚胺衍生物,并通过紫外可见吸收光谱、循环伏安曲线和X射线衍射对其进行了物性研究。通过溶液旋涂法,制备了该材料的底栅底接触场效应晶体管器件,在空气中表现出p型半导体性能,当退火温度为140 ℃时性能达到最优,其空穴迁移率为0.2 cm_²?V_^-1?s_^-1。     

Electrical conductivity,optical properties and mechanical stability of 3, 4, 9, 10-perylenetetracarboxylic dianhidride based organic semiconductor

The 3, 4, 9, 10-perylenetetracarboxylic dianhydride (PTCDA) doped polymer films were prepared with Polypyrrole (PPy) and Polyvinyl alcohol (PVA) polymers by solution-casting. The change in structure and chemical composition of samples was identified by XRD and FTIR respectively. The UV–visible spectroscopy demonstrates the optical characteristics and band gap properties of sample. The homogeneous morphology of sample for higher wt% of PTCDA was examined by atomic force microscopy (AFM). The differential scanning calorimetry (DSC) results demonstrate the decrease in melting temperature (T_m) and degree of crystallinity (χ_c%) of polymeric organic semiconductor. The mechanical property demonstrates the high tensile strength and improved plasticity nature. Impedance spectroscopy was evaluated to determine the conductivity response of polymeric organic semiconductor. The highest DC conductivity (2.08×10⁻³ S/m) was obtained for 10 wt% of PTCDA at 140 °C. The decrease in activation energy (E_a) represents the non-Debye process and was evaluated from the slope of ln σ_dc vs. 10³/T plot.     

First principles study of the electronic structure and phonon dispersion of naphthalene under pressure

The structural, electronic and vibrational properties of crystalline naphthalene has been investigated within the framework of density functional theory including van der Waals interactions. The computed lattice parameters and cohesive energy have good agreement with experimental data. We study on the structural and electronic properties of the naphthalene under the hydrostatic pressure of 0–20 GPa. The isothermal equations of state calculated from the results show good agreement with experiment in the pressure intervals studied. The phonon dispersion curves have been computed at ambient and hydrostatic pressure of 10 and 20 GPa. We have also calculated the quasiparticle band structure of naphthalene with the G₀W₀ approximation.     

Effect of oblique incidence angle of sunlight on the optimized folding angle of V-shaped organic solar cells

We numerically investigate the effect of the incidence angle of sunlight on the optimized folding angle of V-shaped organic solar cells (VOSCs) to obtain the best power conversion efficiency in a realistically operating environment. The light absorbance at the active layer is calculated based on the finite element method with respect to the incidence angle of sunlight and the folding angle of the VOSC. We calculate the generation energy density per day at each folding angle by integrating the angular response of the short-circuit current and the open-circuit voltage with the consideration of the variation of the incidence angle during daytime. We show that the optimized folding angle of the VOSC based on the variation of the generation energy density per day is close to that determined from the variation of the electric power density in normal incidence, which has been widely used to optimize the folding angle of VOSCs.     

ITO-free inverted organic solar cells fabricated with transparent and low resistance ZnO/Ag/ZnO multilayer electrode

Inverted organic solar cells (OSCs) based on poly (3-hexylthiophene) (P3HT):[6,6]-phenyl-C61 butyric acid methyl ester (PCBM) bulk heterojunctions (BHJ) were fabricated with optimized ZnO/Ag/ZnO multilayer and conventional indium–tin oxide (ITO) cathode electrodes and their performance was compared. The ZnO/Ag/ZnO multilayer films showed sheet resistances in the range 3.6–3.9 Ω/sq, while ITO exhibited 14.2 Ω/sq. On the one hand, the carrier concentration gradually decreased from 1.74 × 10²² to 4.33 × 10²¹ cm⁻³ as the ZnO thickness increased from 8 to 80 nm, respectively. The transmittance of the ZnO(40 nm)/Ag(19 nm)/ZnO(40 nm) films was ∼95% at 550 nm, which is comparable to that of ITO (∼96%). The multilayer films were smooth with a root mean square (RMS) roughness of 0.81 nm. OSCs fabricated with the ZnO(40 nm)/Ag(19 nm)/ZnO(40 nm) film showed a power conversion efficiency (2.63%) comparable to that of OSCs with a conventional ITO cathode (2.71%).     

Electrochemical Determination of Organic Compounds in Automotive Fuels

This article critically reviews the electroanalytical methods devoted for the determination of organic compounds in automotive fuels that can range from contaminants to additives typically introduced into liquid biofuels and liquid fossil fuels. Contaminants such as aldehydes and ketones in bioethanol, free fatty acids and glycerol in biodiesel, and sulfur and nitrogen organic compounds in gasoline and diesel fuel, and additives such as colour markers and antioxidants added to fuels were determined by electroanalytical methods. Special focus is given to electrodes, electrochemical techniques, and sample preparation strategies. Future directions of research on electroanalysis of liquid fuels are presented.