有机试剂结构与性质的研究XII有机试剂的pKa与改进的Swain－Lupton参数

有机试剂的ｐＫ０ａ是其重要的物化参数，它是有机试剂酸碱性的度量，决定其配合物的稳定性．根据Ｓｗａｉｎ－Ｌｕｐｔｏｎ的工作，每个取代基的效应可用两个参数：场／诱导效应参数与共振效应参数来描述．本文应用Ｈａｎｓｃｈ改进的参数值研究了ｐＫａ与取代基常数的相关性，建立了下式．ｐＫａ＝ｐＫ０ａ＋ｒ１Ｆ＋ｒ２Ｒ     

Ga3(HPO3)4F4(H3DETA) (DETA=diethylenetriamine): A new open-framework fluorinated gallium phosphite with pentameric building unit

Ga₃(HPO₃)₄F₄(H₃DETA) is a new open-framework fluorinated gallium phosphite obtained by mild hydrothermal synthesis using diethylenetriamine as templated agent and characterized by single crystal X-ray diffraction, the powder X-ray diffraction, IR spectroscopy, TGA, ICP and elemental analyses. It crystallizes in the monoclinic space group C2/c, a=12.741(6) Å, b=12.068(6) Å, c=11.988(5) Å, β=94.902(8)^o, V=1836.6(15) Å³, Z=4. The construction of 3D open-framework structure in the title compound may be viewed as the assembly of pentameric building units and HPO₃ groups. The pentameric building unit is the first to be found, which lead to form the three types of channels along a-, b- and c-axes, respectively, in gallium phosphite. The triprotonated DETA cations are inserted within the 10-membered ring channels and interact with anions of the framework via hydrogen bonds.     

Investigation on spontaneous ignition of two kinds of organic material with water

A systematic investigation was performed to elucidate the cause of spontaneous ignition of Refuse Derived Fuel (RDF) and Meat Bone Meal (MBM). Heat generation in both RDF and MBM with addition of water liquid and vapor at room temperature was determined by isothermal calorimetry. Compared with water liquid, the heat of wetting by sorption of water vapor at 80% relative humidity and 25 °C was larger, which can raise the temperature of RDF and MBM more than 30 and 56 °C, respectively. Heat generation due to fermentation occurred and the temperature of RDF and MBM reached or exceeded 80 °C after 5 days for RDF and 4 days for MBM at 100% RH. The spontaneous ignition for RDF and MBM results from heat of wetting and fermentation at room temperature and a further exothermic reaction at higher temperature.     

Ozone as an oxygen source for alkene ene-reactions

Summary A strategy was developed which uses the adduct of ozone and triphenyl phosphite as a substitute for photochemically generated singlet oxygen in ene reactions of olefins. The resulting allylic hydroperoxide can be conveniently reduced by a second mole of phosphite to yield the corresponding allylic alcohol. The aryl phosphate produced as the by-product can either be recycled by reduction or used itself as a commodity. As an example, the two key steps of the rose oxide synthesis involving singlet oxygen can thus be reduced to a one pot procedure. With respect to the reaction mechanism, additional arguments for the direct reaction of the olefin with the phosphite ozonide were gathered. A simple decomposition of the ozonide to produce singlet oxygen was made rather unlikely.

---

Ozon als Sauerstoffquelle für En-Reaktionen von Olefinen

Zusammenfassung Es wurde eine Strategie zum Ersatz von photochemisch erzeugtem Singlett-Sauerstoff durch das Addukt aus Ozon und Triphenylphosphit zum Einsatz in En-Reaktionen von Olefinen entwickelt. Das entstehende allylische Hydroperoxid kann durch ein zweites Molekül Phosphit einfach zum entsprechenden allylischen Alkolhol reduziert werden. Das als Nebenprodukt entstehende Arylphosphat kann entweder durch Reduktion recycliert oder direkt als Handelsware weiterverwendet werden. Auf diese Weise können zum Beispiel die beiden Stufen der Rosenoxidsynthese, an denen Singlett-Sauerstoff beteiligt ist, zu einer Eintopfreaktion vereinfacht werden. Bezüglich des Reaktionsmechanismus wurden zusätzliche Hinweise auf die direkte Reaktion des Phosphitozonids mit dem Olefin gefunden. Eine Zersetzung des Ozonids unter Bildung von Singlettsauerstoff ist nicht wahrscheinlich.

     

Synthesis and electrochemical properties of Zn3V3O8 as novel anode material

Zn₃V₃O₈ two-dimensional micro sheets are successfully synthesized by combination of solvothermal method and heat treatment. The Zn₃V₃O₈ has better electrochemical performances after calcinations.     

Organic fuelled flames in selective ionization detectors for chromatography

Summary The selectivities of two flame-based ionization detectors identified as a Remote FID (RFID) and a Flame Thermionic Ionization Detector (FTID) have been improved by introducing methane as a fuel for the flame. Both the RFID and FTID feature a detector struture in which the ionization polarizer and collector are located several centimeters downstream of an oxygen-rich flame, rather than immediately adjacent to the flame as in a flame ionization detector. The RFID detects long-lived negative ions produced in the flame by the combustion of lead, tin, phosphorus, or silicon compounds. The FTID re-ionizes and detects neutral electronegative products generated by combustion of nitrogen, halogen, or phosphorus compounds. An organic-fuelled RFID can detect 1 pg Pb (Sn, P)/sec with a selectivity of the order of 10⁶ versus hydrocarbons. An organic fuelled FTID is applicable to detection of compounds at nanogram and higher levels. FTID selectivity for PCB compounds in a transformer oil matrix is of the order of 10⁵1. The improved selectivity achieved by using an organic-fuelled flame is also applicable to the detection of phospholipid and other non-volatile N, P, or Cl compounds using an FID/FTID detector accessory for a TLC/FID analyser.     

Determination of partition behavior of organic surrogates between paperboard packaging materials and air

The suitability of recycled paperboard packaging materials for direct food contact applications is a major area of investigation. Chemical contaminants (surrogates) partitioning between recycled paper packaging and foods may affect the safety and health of the consumer. The partition behavior of all possible organic compounds between cardboards and individual foodstuffs is difficult and too time consuming for being fully investigated. Therefore it may be more efficient to determine these partition coefficients indirectly through experimental determination of the partitioning behavior between cardboard samples and air. In this work, the behavior of organic pollutants present in a set of two paper and board samples intended to be in contact with foods was studied. Adsorption isotherms have been plotted and partition coefficients between paper and air have been calculated as a basis for the estimation of their migration potential into food. Values of partition coefficients (Kpaper/air) from 47 to 1207 were obtained at different temperatures. For the less volatile surrogates such as dibutyl phthalate and methyl stearate higher Kpaper/air values were obtained. The adsorption curves showed that the more volatile substances are partitioning mainly in air phase and increasing the temperature from 70 to 100 degrees C their concentrations in air (Cair) have almost doubled. The analysis of surrogates was performed with a method based on solvent extraction and gas chromatographic-flame ionization detection (GC-FID) quantification.     

Determination of polar organic compounds by potentiometry at an anodically pretreated nickel oxide electrode

The open-circuit potential drop of an oxidatively pretreated nickel electrode in 0.1 M NaOH was used to develop a technique for the determination of alcohols, amino acids, carbohydrates, etc., in aqueous solution. The electrode pretreatment consisted of the formation of nickel hydrated oxides on the electrode surface with an oxidation state > 2. Both electrochemical and chemical pre-oxidation of the electrode surface were examined. The analytical signal was the enhancement of the potential drop corresponding to analyte concentration. The analytical signal was linearly related to the logarithm of the analyte concentration. The limits of determination ranged from 1 mM for low-molecular-weight to 0.02 mM for alkyl polyether alcohols. The flow-injection technique allows convenient pretreatment and direct observation of the analytical signal. Interferences from chloride and calcium can be readily eliminated by excluding them during electrode pretreatment. Potentiometric measurements were correlated with amperometric anodic responses at the nickel oxide electrode, allowing an unusual direct comparison of the two methods.     

Preparation and application of cryptand-coated piezoelectric crystal gas-chromatographic detector

A re-usable and sensitive cryptand-22-coated quartz-crystal membrane piezoelectric sensor with a homemade computer interface for signal acquisition and data processing was prepared and applied as a gas-chromatographic (GC) detector for various organic molecules. The oscillating frequency of the quartz crystal decreased due to the adsorption of organic molecules on cryptand-22. Effects of functional group, molar mass, steric hindrance and polarity of organic molecules on frequency responses of the cryptand-coated piezoelectric crystal detector were investigated. The cryptand-coated piezoelectric crystal GC detector had demonstrated high sensitivity for various polar organic molecules and good reproducibility when re-used. The frequency responses of the cryptand-coated crystal for various molecules were in the following order: carboxylic acids (RCOOH)primary amines (R-NH₂)>alcohols (ROH)>secondary amines (R₂NH)>tertiary amines (R₃N)>ketones. More polar molecules exhibited better frequency responses. The effect of temperature and amount of coating on the frequency responses of cryptand-coated crystal GC detector were also investigated. The cryptand-coated piezoelectric crystal GC detector compared well with the commercial thermal conductivity detector (TCD).     

Using capillary electrophoresis for the determination of organic acids in Port wine

The simultaneous separation and determination of organic acids in several samples of white and red Port wines was performed by capillary zone electrophoresis using indirect UV detection with 2,6-pyridinedicarboxylic acid as a background electrolyte buffer. Operational parameters like migration time, temperature, voltage and capillary length were optimized. Sixteen samples of red wine and four samples of white wine were used to analyze for tartaric, malic, lactic, succinic and acetic acids using glyoxylic acid as the internal standard. The method is rapid, sensitive and quantitative, and time-consuming sample preparation, such as solid-phase extraction or liquid-liquid extraction procedure, is not required.