Multi‐responses Methodology Applied in the Electroanalytical Determination of Hair Dye by Using Printed Carbon Electrode Modified with Graphene

This paper describes a rapid and sensitive method for determination of the hair dye Basic Blue 41 in wastewater samples using screen‐printed carbon electrodes modified with graphene (SPCE/Gr). The method is based on the reversible reduction of azo groups of the dye at potential of ?0.23 V/?0.26 V, where both the anodic and cathodic currents increased 1,300 % when compared to screen‐printed carbon (SPCE) and glassy carbon electrodes (GCE). The optimization of a square wave voltammetric method was performed by means of 2³ factorial design, Doehlert matrix and multi‐response assays, and the best parameters were: frequency (54.8 Hz), step potential (6 mV), pulse amplitude (43.7 mV) and pH 4.5. The analytical curve was constructed from 3.00×10^?8 to 2.01×10^?6 mol L^?1, with detection and quantification limits of 5.00×10^?9 and 1.70×10^?8 mol L^?1, respectively. The repeatability of the method evaluated for 10 consecutive measurements at concentrations of 1.70×10^?7 mol L^?1 and 1.70×10^?6 mol L^?1, showed relative standard deviation of 3.56 and 0.57 %, respectively. The sensor based in SPCE/Gr was successfully applied in wastewater samples collected from a drinking water treatment plant and validated by comparison with HPLC‐DAD method with good accuracy.     

Transition Metal Substituted Barium Hexaferrite-Modified Electrode: Application as Electrochemical Sensor of Acetaminophen

This study used substituted barium hexaferrites, which were previously prepared and reported by the authors, to detect acetaminophen by the modification of a conventional glassy carbon electrode (GCE), which led to promising results. The synthesis of this electrode-modifying material was conducted using a citrate sol gel process. A test synthesis using glycerin and propylene glycol revealed that glycerin produced a better result, while less positive anodic potential values were associated with the electrooxidation of N-acetyl-p-aminophenol (NAP). Excellent electroactivity was exhibited by the cobalt-substituted barium-hexaferrite-nanomaterial-modified electrode. A good linear relationship between the concentration and the current response of acetaminophen (paracetamol) was obtained with a detection limit of (0.255 ± 0.005) µM for the Ba_1.0Co_1.22Fe_11.41O_18.11 GCE, (0.577 ± 0.007) µM for the Ba_1.14Cu_0.82Fe_11.65O_18.02 GCE, and (0.595 ± 0.008) µM for the bare GCE. The levels of NAP in a real sample of urine were quantitatively analyzed using the proposed method, with recovery ranges from 96.6% to 101.0% and 93.9% to 98.4% for the modified electrode with Cobalt-substituted barium hexaferrites (CoF_M) and Copper-substituted barium hexaferrites (CuF_M), respectively. These results confirm the high electrochemical activity of Ba_1.0Co_1.22Fe_11.41O_18.11 nanoparticles and thus their potential for use in the development of sensing devices for substances of pharmaceutical interest, such as acetaminophen (NAP).     

Formation of Ultrafine Apatite Fibers by Sol-gel/Electrospinning

Ultrafine apatite fibers were prepared by electrospinning of sol-gel precursor/poly（ vinyl pyrrolidone） （PVP） solutions followed by subsequent calcination. The as-electrospun and calcinated fibers were observed under a scanning electron microscope and an optical polarizing microscope. Results show that the morphology and the diameter of as-electrospun fibers strongly depend on the viscosity and the surface tension of sol-gel precursor/PVP solutions. After calcination, the smooth as-electrospun fibers shrink and the fiber diameter decreases because of the removal of the polymer. The chemical evolution upon the transformation of the precursor from a gel to the final apatite fibers was investigated by thermogravimetric-differenfial thermal analysis, X-ray diffraction, and Fourier transform infrared spectroscopy. It is thus suggested that the crystalline structure of the calcined fibers is largely influenced by the calcination temperature. After being calcined at 600 ℃, the apatite fibers with a diameter of about 280 nm containing β-tricalcium phosphate were obtained.     

反射式红外传感器在智能型节水系统中的应用

利用反射式红外传感器和少量的电子器件(单稳态触发器),研制了智能型节水控制系统。该系统能够识别是否有人入厕,酌情产生冲洗信号, 躯动进水电磁阀开启,向浮球式水箱内注水,待注满足以冲刷干净所需的两水箱水后,便自动地切断电磁阀中电源,达到了既卫生又节约的目的。在某一教学楼应用该系统一年多来,与无使用此系统的同规模另一教学楼相比,节水约70％。该系统元件少、成本低、结构合理、工作可靠、安装容易、维修方便,有广阔的应用前景。     

Optical logic redux

Twenty years ago IBM physicist Robert Keyes published a paper entitled “Optical Logic—in the light of computer technology.” It caused an instant furor in the fledgling optical logic community. Now, 20 years after that devastating critique, the field of optical logic has grown enormously. There are literally thousands of papers. Many of them are collected in a bibliography given here. Was Keyes’ critique wrong? Have opticists simply ignored what Keyes pointed out? Have new developments made some of his remarks not quite so relevant? We argue here that

•

Keyes was and still is mostly correct, but that may change in a few years

•

Many researchers have indeed simply ignored what he said

•

New developments in both optical logic and its applications open niches for optical logic that Keyes did not (and probably could not) anticipate

•

New and anticipated developments in electronics may increase the role for optics

     

Optical and fluorescence spectroscopy of Eu2O3-doped P2O5-K2O-KF-MO-Al2O3 (M = Mg, Sr and Ba) glasses

Fluorophosphate glasses of composition, P₂O₅ + K₂O + KF + MO + Al₂O₃ + xEu₂O₃ (M = Mg, Sr and Ba; x = 0.01, 0.05, 0.1, 1.0, 2.0, 4.0 and 6.0 mol%) were prepared and characterized their optical properties. Crystal-field (CF) analysis revealed a relatively weak CF strength around Eu³⁺ ions in the Ba based fluorophosphate glasses. The Judd-Ofelt parameters have been estimated from the oscillator strengths of ⁷F₀ → ⁵D₂, ⁷F₀ → ⁵D₄ and ⁷F₀ → ⁵L₆ absorption transitions of Eu³⁺ ions and were used to evaluate the radiative properties of the ⁵D₀ → ⁷F_J (J = 0-4) transitions. Considerable variation has been observed in the relative intensity ratio of ⁵D₀ → ⁷F₂ to ⁵D₀ → ⁷F₁ transitions of Eu³⁺ ions due to change in the alkaline earth metal ions. The decay of the ⁵D₀ level shows single exponential and less sensitive to Eu³⁺ ions concentration as well as MgO/SrO/BaO modifiers.     

Red top-emitting organic light-emitting device with improved efficiency and saturated color

In this work, characteristics of microcavity top-emitting red organic light-emitting device (TEROLED) having metallic electrodes had been examined. The TEOLED shows the higher efficiency in comparison with that of the bottom OLED. However, color variation with the increasing view angles is also observed. For the purpose of diminishing the blue-shift of resonant wavelength (RW) in the device with increasing view angle, the effect of out-coupling layer on the emission properties of the TEOLED is discussed in detail. Finally, the out-coupling layer was introduced in theory without sacrificing the efficiency through precise optical simulation.     

The analysis of the error statistics in a 5 × 40 Gbit/s fibre link with hybrid amplification

We quantify the error statistics and patterning effects in a 5 × 40 Gbit/s WDM RZ-OOK SMF/DCF fibre link using hybrid Raman/EDFA amplification. By extensive use of a numerical model, we determine how the error statistics change with the transmission distance. This knowledge is used as a basis for a constrained coding technique in order to improve the transmission error rate. We propose an adaptive constrained code for mitigation of the patterning effects and demonstrate that this approach can substantially reduce the bit error rate (BER) even for very large values of the channel BER (BER > 10^− 1). The proposed technique can be used in combination with forward error correction schemes (FEC) to extend the range of channel BERs that an FEC scheme is effective over.     

Application of robust color composite fringe in flip-chip solder bump 3-D measurement

This study developed a 3-D measurement system based on flip-chip solder bump, used fringes with different modulation intensities in color channels, in order to produce color composite fringe with robustness, and proposed a multi-channel composite phase unwrapping algorithm, which uses fringe modulation weights of different channels to recombine the phase information for better measurement accuracy and stability. The experimental results showed that the average measurement accuracy is 0.43μm and the standard deviation is 1.38 µm. The results thus proved that the proposed 3-D measurement system is effective in measuring a plane with a height of 50 μm. In the flip-chip solder bump measuring experiment, different fringe modulation configurations were tested to overcome the problem of reflective coefficient between the flip-chip base board and the solder bump. The proposed system has a good measurement results and robust stability in the solder bump measurement, and can be used for the measurement of 3-D information for micron flip-chip solder bump application.