Optical metal-organic framework sensor for selective discrimination of some toxic metal ions in water

This paper reports the development of a facile and effective approach, based on the use of Zr-based metal-organic frameworks (UiO-66) sensor with micropores geometry, shape and particle morphology for the visual detection and removal of ultra-traces of some toxic metal ions such as Bi(III), Zn(II), Pb(II), Hg(II) and Cd(II). UiO-66 was used as selective carriers for accommodating hydrophobic chromophore probes such as dithizone (DZ) without coupling agent for sensitive and selective discrimination of trace level of toxic analytes. The developed UiO-66 sensor was utilized for the detection of ultra-traces of some toxic metal ions with the naked eye. The new sensor displays high sensitivity and selectivity of a wide range of detectable metals analytes up to 10⁻¹⁰ mol dm⁻³ in solution, in a rapid analyte uptake response (seconds). The developed sensor is stable, cost effective, easy to prepare, and would be useful for rapid detection and removal of ultra-traces of toxic metal ions in water samples.     

Synthesis of β,β′-edge fused, π-extended porphyrins and their applications in the dye-sensitized solar cells

Four π-extended, β,β′ aromatic ring fused porphyrins including mono- and opp-dibenzoporphyrins bearing two carboxyl groups at only one fused benzo group were synthesized. The optical results by UV–vis spectroscopy indicate that when compared with the absorption spectra of monobenzoporphyrins, greater light-harvesting capabilities can be realized for opp-dibenzoporphyrins with two benzo group at the opposite β,β′ positions of the porphyrin. The photovoltaic properties of these π-extended porphyrins were examined for the first time and the highest conversion efficiency of 1.62% was realized for opp-dibenzoporphyrin 8a-sensitized solar cell, which is ∼60% higher than that of monobenzoporphyrin 4a based solar cell indicating the effect of an extra aromatic π conjugation on the light-harvesting capabilities of π-extended porphyrins. Subsequent DFT calculation results supported our results obtained in the optical and photovoltaic studies.     

Modification and Application of Poly(Ethylene Terephethalate) Nonwoven Fiber Using Octadecyl Acrylate and Acrylic Acid as Oil Sorbers

Three series of crosslinked octadecyl acrylate and acrylic acid copolymers were prepared through suspension copolymerization based on acrylic acid content (10, 30, 50%wt. ratio). Divinyl benzene (DVB) was used as a crosslinker with different weight ratios (1, 4 and 10%). Isopropyl alcohol or dioctyl phthalate and methyl benzoate were used as two different reaction solvents in the presence of ABIN as initiator. The prepared crosslinked copolymers were characterized by SEM, TGA and FTIR spectroscopic analyses. The prepared polymers were coated onto poly(ethylene terephethalate) nonwoven fiber (NWPET). The effect of copolymerization feed composition, crosslinker wt% and reaction media or solvent on swelling properties of crosslinked polymers were studied through the oil absorption tests in toluene and 10% of diluted crude oil with toluene. It was noticed that the maximum swelling of crosslinked copolymers was increased from 30 to 100 g/g after grafting of copolymers onto NWPET.     

Influence of surface properties on the interfacial adhesion in carbon fiber/epoxy composites

A polyacrylonitrile‐based carbon fiber was electrochemically oxidized in an aqueous ammonium bicarbonate solution with current density of up to 2.76 A/m² at room temperature. X‐ray photoelectron spectroscopy revealed that the oxygen content increased with increasing current density before approaching saturation. The increase can be divided into two regions, the rapid increase region (0–1.78 A/m²) and a plateau region (1.78–2.76 A/m²). The surface chemistry analysis showed that the interlaminar shear strength (ILSS) value of the carbon fiber/epoxy composite could be improved by 24.7%. The carbon structure was examined using Raman spectroscopy in terms of order/disorder in the graphite structure and the results indicated that the relative percentage of graphite carbon in the form of sp² hybridization increased above a current density of 1.39 A/m². The increasing non‐polar graphite carbon on the carbon fiber surface decreased the surface energy. As a result, both the surface free energy () and its polar component () decreased when current density increased above 1.78 A/m². The ILSS value had no direct relationship with the nature and surface density of the oxygen‐containing functional groups nor with the carbon structure. It is the surface free energy (), especially the polar component (), which played a critical role in affecting the interfacial adhesion of carbon fiber/epoxy composites. The ILSS value changed with increasing current density and could be divided into three distinct regions, as chemical interaction region (I), anchor force region (II) and matrix damage region (III). Copyright © 2013 John Wiley & Sons, Ltd.     

ZnS/PVA nanocomposites for nonlinear optical applications

We have found a correlation between ZnS nanocomposite nonlinear optical features and technological processing using electrolytic method. In the earlier researches this factor was neglected. However, it may open a new stage for operation by photovoltaic features of the well known semiconductors within a wide range of magnitudes. The titled nanostructured zinc sulfide (ZnS) was synthesized by electrolytic method. The obtained ZnS nano-crystallites possessed nano-particles sizes varying within 1.6 nm…1.8 nm. The titled samples were analyzed by XRD, HR-TEM, STEM, and nonlinear optical methods such as photo-induced two-photon absorption (TPA) and second harmonic generation (SHG). For this reason the nano-powders were embedded into the photopolymer poly(vinyl) alcohol (PVA) matrices. Role of aggregation in the mentioned properties is discussed. Possible origin of the such correlations are discussed.     

Green synthesis and characterization of Au@Pt core–shell bimetallic nanoparticles using gallic acid

In this study, we developed a facile and benign green synthesis approach for the successful fabrication of well-dispersed urchin-like Au@Pt core–shell nanoparticles (NPs) using gallic acid (GA) as both a reducing and protecting agent. The proposed one-step synthesis exploits the differences in the reduction potentials of AuCl₄⁻ and PtCl₆²⁻, where the AuCl₄⁻ ions are preferentially reduced to Au cores and the PtCl₆²⁻ ions are then deposited continuously onto the Au core surface as a Pt shell. The as-prepared Au@Pt NPs were characterized by transmission electron microscope (TEM); high-resolution transmission electron microscope (HR-TEM); scanning electron microscope (SEM); UV-vis absorption spectra (UV-vis); X-ray diffraction (XRD); Fourier transmission infrared spectra (FT-IR). We systematically investigated the effects of some experimental parameters on the formation of the Au@Pt NPs, i.e., the reaction temperature, the molar ratios of HAuCl₄/H₂PtCl₆, and the amount of GA. When polyvinylpyrrolidone K-30 (PVP) was used as a protecting agent, the Au@Pt core–shell NPs obtained using this green synthesis method were better dispersed and smaller in size. The as-prepared Au@Pt NPs exhibited better catalytic activity in the reaction where NaBH₄ reduced p-nitrophenol to p-aminophenol. However, the results showed that the Au@Pt bimetallic NPs had a lower catalytic activity than the pure Au NPs obtained by the same method, which confirmed the formation of Au@Pt core–shell nanostructures because the active sites on the surfaces of the Au NPs were covered with a Pt shell.     

Influence of Al-doped ZnO and Ga-doped ZnO substrates on third harmonic generation of gold nanoparticles

Principal role of substrate types on the nonlinear optical properties of Au NP was investigated. Third harmonic generation (THG) studies were carried out for Au NP deposited on the Al-doped ZnO (AuNP/AZO) and Ga-doped ZnO (AuNP/GZO) substrates at fundamental wavelength of 20 ns Er:glass laser (generating at 1540 nm wavelength) during photostimulation by the 532 nm 15 ns laser pulses. Sizes of Au NP were 5 nm, 10 nm, 20 nm, and 30 nm. The output signal was registered at 513 nm. The photoinduced power density was increased from 0 up to 800 MW/cm². So in our work we explore the role of the substrate on the optically stimulated non-linear optical properties during simultaneous photo stimulation near the inter-band transition. The results were studied depending on the type of substrate and the sizes of the deposited nanoparticles. The analysis was done within a framework of interaction between the photoinduced light and SPR wavelengths. Control of the photoinduced temperature was done.     

Design of Optical Directional Couplers Made of Polydimethysiloxane Liquid Crystal Channel Waveguides

We present numerical simulations of a directional coupler based on three-dimensional waveguides made of a nematic liquid crystal, acting as the waveguide core, infiltrated in polydimethysiloxane channels. Modeling is based on the combination of minimization of Oseen-Frank energy of the liquid crystal molecules with a beam propagation algorithm. Design of the coupler waveguides is optimized to minimize coupling lengths and maximise efficiencies. Such components can be made at low cost on flexible plastic substrates and can be also integrated with optofluidic devices for biomedical applications.