Minimization of Interferences in Flow Injection Amperometric Glucose Biosensor Based on Oxidation of Enzymatically‐produced H2O2

One of the major problems in amperometric biosensors based on detection of H₂O₂ produced by enzymatic reaction between oxidase enzymes and substrate is the interference of redox active compounds such as ascorbic acid (AA), dopamine (DA) and uric acid (UA). To minimize these interferences, sodium bismuthate was used for the first time as an insoluble pre‐oxidant in the flow injection (FI) amperometric glucose biosensor at a Glucose oxidase (GOx) immobilized Pt/Pd bimetallic modified pre‐anodized pencil graphite electrode (p.PGE). In this context, these interfering compounds were injected into a flow injection analysis (FIA) system using an injector which was filled with NaBiO₃. Thus, these interferents were converted into their redox inactive oxidized forms before reaching the electrode in the flow cell. While glucose was not influenced by the pre‐oxidant in the injector, the huge oxidation peak currents of the interferents decreased significantly in the biosensor. FI amperometric current time curves showed that the AA, DA and UA were minimized by 96 %, 86 %, and 98 % respectively, in the presence of an equivalent concentration of interferences in a 1.0 mM glucose solution. The proposed FI amperometric glucose biosensor exhibits a wide linear range (0.01–10 mM, R²=0.9994) with a detection limit of 2.4×10^?3 mM. Glucose levels in the artificial serum and two real samples were successfully determined using the fabricated FI amperometric biosensor.     

Promising photoluminescence optical approach for triiodothyronine hormone determination based on smart copper metal–organic framework nanoparticles

A copper metal–organic framework nanoparticles (Cu‐MOF‐NPs) synthesized via simple technique. The prepared Cu‐MOF‐NPs nanoparticles were further characterized using ¹H‐NMR, FE‐SEM/EDX and thermal study (DSC/TGA). The FE‐SEM/EDX, thermal analysis, and NMR spectrum data with the other analysis support the nano‐Cu‐MOF structure and the monomeric unit (n[Cu (AIP)₂(APY)(H₂O)₂].4H₂O) of Cu‐MOF‐NPs. The photoluminescence (PL) studies of triiodothyronine hormone (T3) based on the prepared Cu‐MOF‐NPs investigated. The results revealed that the Cu‐MOF‐NPs might be used as a biosensor in the determination of triiodothyronine hormone (T3) in biological fluids through a significant quenching of the photoluminescence intensity of Cu‐MOF‐NPs at excitation wavelength 492 nm. The calibration plot achieved over the concentration range 0.0–200.0 ng/dL T3 hormone with a correlation coefficient 0.996 and limit of detection (LOD) and quantification (LOQ) 0.198 and 0.60 ng/dL, respectively. The PL spectra are indicating that Cu‐MOF‐NPs has highly selective sensing properties for T3 hormone without interfering with other human many hormones types. This approach considered a promising analytical tool for early diagnosis of the cases of thyroid disease. The mechanism of quenching between the Cu‐MOF‐NPs, and T3 hormone studied. The mechanism was a dynamic type and obtained due to the energy transfer mechanism.     

口腔癌相关唾液肿瘤生物标志物的分析检测研究进展

口腔癌系头颈部癌，癌组织均位于口腔内，其非侵入性早期诊断是减少该病死亡的有效手段.唾液系口腔癌变相关物质首先释放进入的体液，取材方便，安全无创，是口腔癌普查筛选、早期诊断的首选指标.本文对唾液肿瘤生物标志物的种类、目前国内外常用的检测方法进行概述，重点阐述新型电化学生物传感方法在口腔癌相关唾液肿瘤生物标志物检测方面的相关应用及其最新研究进展.并对口腔癌相关唾液肿瘤生物标志物电化学传感技术的未来发展方向提出展望，拟为其深入研究与应用提供参考.     

A New Application of Carbon Nanotubes Constructing Biosensor

Carbon nanotubes used for constructing biosensor was described for the first time. Single-wall carbon nanotubes (SWNTs) functionalized with carboxylic acid groups were used to immobilize glucose oxidase forming a glucose biosensor. The biosensor response can be determined by amperometric method at a low applied potential (0.40V).     

A Chemiluminescence Optical Fiber Glucose Biosensor Based on Co-immobilizing Glucose Oxidase and Horseradish Peroxidase in a Sol-gel Film

IntroductionIn recent years chemiluminescence (CL)biosensor prepared by immobilization of a sensitivereagent such as peroxidase or oxidase onto a solidmatrix has attracted much attention due to the highsensitivity of the chemiluminescent reaction of thesensitive reagent even with a simple instrument.Generally,CL biosensors can be divided into twocategories.One consists of hydrogen peroxide sen-sors prepared by immobilizing a kind of peroxidaseonto a suitable solid support[1,2 ] ,and the immo…     

Coupling of an indicator-free electrochemical DNA biosensor with polymerase chain reaction for the detection of DNA sequences related to the apolipoprotein E

This paper describes a disposable indicator-free electrochemical DNA biosensor applied to the detection of apolipoprotein E (apoE) sequences in PCR samples. In the indicator-free assays, the duplex formation was detected by measuring the electrochemical signal of the guanine base of nucleic acids. The biosensor format involved the immobilisation of an inosine-modified (guanine-free) probe onto a screen-printed electrode (SPE) transducer and the detection of the duplex formation in connection with the square-wave voltammetric measurement of the oxidation peak of the guanine of the target sequence.The indicator-free scheme has been characterised using 23-mer oligonucleotides as model: parameters affecting the hybridisation assay such as probe immobilisation conditions, hybridisation time, use of hybridisation accelerators were examined and optimised.The analysis of PCR samples (244 bp DNA fragments, obtained by amplification of DNA extracted from human blood) required a further optimisation of the experimental procedure. In particular, a lower steric hyndrance of the probe modified surface was essential to allow an efficient hybridisation of the target DNA fragment. Negative controls have been performed using the PCR blank and amplicons unrelated to the immobilised probe. A 10 min hybridisation time allowed a full characterisation of each sample.     

Preparation of Anti—Cardiac Troponin I Monoclonal Antibodies and Their Characterization with Surface Plasmon Resonance Biosensor

IntroductionIn fast and slow skeletal and cardiac muscles,troponin I,the inhibitory protein of the troponin-tropomyosin complex,exists in three isotype formsencoded by three separated genes.The amino acidsequences of the two skeletal and one cardiac Tn Iforms( s Tn I and c Tn I,respectively) exhibit40 %dissimilarity[1] .Moreover,human cardiac Tn I has31 additional residues on the N - terminal end,which do not exist in skeletal forms,thus it pro-vides a high potential for obtaining cardiac-…     

基于微机械加工技术的双腔型生物传感器

利用微机械加工技术研制了具有三维结构的腔型传感器，双腔型工作电极与Ag/Agcl参比电极集成在同一微芯片上。考察了微腔型电极的电化学特性及其对H2O2含量的测定。并以此为基础电极制备了半乳糖、葡萄糖双腔型生物传感器。结果表明，该传感器可同时测定半乳糖、葡萄糖双组分，线性上限分别为4．5mmol/L和4．0mmol/L。而且在测试双组分过程中，没有观察到明显的交叉干扰现象。     

Nanofibers for Biomedical and Healthcare Applications

Unique features of nanofibers provide enormous potential in the field of biomedical and healthcare applications. Many studies have proven the extreme potential of nanofibers in front of current challenges in the medical and healthcare field. This review highlights the nanofiber technologies, unique properties, fabrication techniques (i.e., physical, chemical, and biological methods), and emerging applications in biomedical and healthcare fields. It summarizes the recent researches on nanofibers for drug delivery systems and controlled drug release, tissue‐engineered scaffolds, dressings for wound healing, biosensors, biomedical devices, medical implants, skin care, as well as air, water, and blood purification systems. Attention is given to different types of fibers (e.g., mesoporous, hollow, core‐shell nanofibers) fabricated from various materials and their potential biomedical applications.     

Different PES nanofibrous membrane parameters effect on the efficacy of immunoassay performance

The contribution of electrospun nanofibrous membranes (e.NFMs) in the biosensing platforms opens up a new prospect for the invention of faster and more sensitive analytical devices. In this paper, we utilized e.NFM of polyethersulfone (PES) as a solid substrate for the protein immobilization through two different approaches: physical and covalent. Scanning electron microscopy (SEM) and Fourier‐transform‐infrared (FTIR) tests were performed to study the effect of plasma treatment on protein immobilization efficacy. Moreover, taking advantage of ELISA technique, the influence of different parameters, namely, nanofibers diameter, membrane thickness, plasma treatment time, an incubation time of ethyl‐3‐(3‐dimethylaminopropyl)‐carbodiimide/N‐hydroxysuccinimide (EDC/NHS), and their ratio on antibody immobilization efficacy through two mentioned approaches, was also assessed.