Metal carbonyl catalysis of carbon monoxide and formate reactions

The water gas shift reaction (CO + H₂O = CO₂+ H₂) is catalyzed by aqueous metal carbonyl systems derived from simple mononuclear carbonyls such as Fe(CO)₅ and M(CO)₆ (M = Cr, Mo, and W) and bases in the 140–200 °C temperature range. The water gas shift reaction in a basic methanol-water solution containing Fe(CO)₅ is first order in [Fe(CO)₅], zero order in [CO], and essentially independent of base concentration and appears to involve an associative mechanism with a metallocarboxylate intermediate [(CO)₄Fe-CO₂H]^–. The water gas shift reactions using M(CO)₆ as catalyst precursors are first order in [M(CO)₆], inverse first order in [CO], and first order in [HCO₂ ^–] and appear to involve a dissociative mechanism with formatometallate intermediates [(CO)₅M-OCHO]^–.The Reppe hydroformylation of ethylene to produce propionaldehyde and 1-propanol in basic solutions containing Fe(CO)₅ occurs at 110–140 °C. This reaction is second order in [Fe(CO)₅], first order in [C₂H₄] up to a saturation pressure >1.5 MPa, and inhibited by [CO]. These experimental results suggest a mechanism where the rate-determining step involves a binuclear iron carbonyl intermediate. The substitution of Et₃N for NaOH as the base facilitates the reduction of propionaldehyde to 1-propanol but results in a slower rate for the overall reaction.The homogeneous photocatalytic decomposition of the formate ion to H₂ and CO₂ in the presence of Cr(CO)₆ appears to be closely related to the water gas shift reaction. The rate of H₂ production from the formate ion exhibits saturation kinetics in the formate ion and is inhibited by added pyridine. The infrared spectra of the catalyst solutions indicate an LCr(CO)₅ intermediate. Photolysis of the Cr(CO)₆/formate system in aqueous methanol in the presence of an aldehyde RCHO (R =n-heptyl,p-tolyl, andp-anisyl) results in catalytic hydrogenation of the aldehyde to the corresponding alcohol RCH₂OH by the formate ion. Detailed kinetic studies onp-tolualdehyde hydrogenation by this method indicates saturation kinetics in formate ion, autoinhibition by thep-tolualdehyde, and a threshold effect for Cr(CO)₆ at concentrations >0.004 mol L^–1. The presence of an aldehyde can interrupt the water gas shift catalytic cycle by interception of an HCr(CO)₅ ^– intermediate by the aldehyde.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1533–1539, September, 1994.     

XPS study of interactions between linear carbon chains and colloidal Au nanoparticles

1. Download : Download high-res image (158KB)
2. Download : Download full-size image

     

Electrochemical instability of bis(trifluoromethylsulfonyl)imide based ionic liquids as solvents in high voltage electrolytes for potassium ion batteries

1. Download : Download high-res image (153KB)
2. Download : Download full-size image

     

A hybrid nonaqueous electrochemical supercapacitor using nano-sized iron oxyhydroxide and activated carbon

A beta-iron oxyhydroxide (FeOOH) was synthesized via a hydrolyzing route and investigated as a lithium intercalation host. It delivers a capacity of about 170 mAh/g and exhibits good cycling performance when charged/discharged in the voltage range from 1.6 V to 3.3 V. For the first time we have confirmed that FeOOH is suitable for using it as a negative electrode for hybrid electrochemical supercapacitor assembled with an activated carbon positive electrode in 1.0 M LiPF₆ ethylene carbonate/dimethyl carbonate (EC/DMC, 1:2 in volume) solution. The cell reveals a slightly sloping voltage profile from 0 V to 2.8 V and gives an estimated specific energy of 45 Wh/kg based on the total weight of two electrode materials, approximately two times of carbon/carbon electrochemical double layer capacitors. The hybrid supercapacitor shows a good cycling performance, it remains approximately 96% of initial capacity after 800 cycles at a charge/discharge rate of 4 C. The capacitor also shows a desirable rate capability, even at 10 C discharge rate, it holds 80% of capacity compared with that at 1 C discharge rate.     

LiNi0.8Co0.2O2 / MWNTs复合物超级电容器电极材料的研究

Multiwalled carbon nanotubes (MWNTs) were used as the conductive additive in the electrode materials. The electrochemical properties of supercapacitors based on LiNi_0.8Co_0.2O₂ / MWNTs composite and LiNi_0.8Co_0.2O₂/acetylene black composite and MWNTs in 1.0 mol·L^-1 LiClO₄ / EC+DEC [V(EC)∶V(DEC)=1∶1] electrolyte were investigated by means of constant charge/discharge current tests, respectively. The experimental results show that the LiNi_0.8Co_0.2O₂ / MWNTs composite has better performance than that of others, and the maximum specific capacitance of the supercapacitor can reach 271.6 F·g^-1, while the energy density is up to 339.5 Wh·kg^-1. Furthermore, it is remarkable that the performance of MWNTs is better than that of acetylene black as the conductive additive.     

镓(Ⅲ)-茜素氨羧络合剂在碳糊电极上的阳极吸附伏安法研究及应用

研究了镓(Ⅲ)-茜素氨羧络合剂(ALC)在碳糊电极上的阳极吸附伏安行为,并以此建立了一种高灵敏度、高选择性测定镓的吸附伏安法.在0.12 mol/L HAc-NaAc-0.24 mol/L邻苯二甲酸氢钾底液(pH 4.5)中,-0.10 V (vs.SCE) 富集90 s (或180 s),以250 mV/s扫速线性扫描至0.90 V, Ga3+-ALC在碳糊电极上产生灵敏的与ALC的峰电位相差近230 mV的吸附氧化峰,其二次导数峰电流与镓浓度在5.0×10-10～8.0×10-7 mol/L范围内呈线性关系;富集240 s检出限达3.0×10-10 mol/L(S/N=3).探讨了电极反应机理.该法用于粮食样品中镓的测定,结果满意.     

高温下硅酸锂吸收CO2的研究

以SiO₂和Li₂CO₃为反应原料，采用高温固相法于不同温度下合成了一系列可在高温500~750 ℃之间直接吸收CO₂的硅酸锂(Li₄SiO₄)材料。采用扫描电子显微镜(SEM)、X射线粉末衍射仪(XRD)分别观察和评价了合成材料的表面形貌与结构特征，用热重分析仪(TG)研究了硅酸锂材料吸收CO₂的性能。实验结果表明，在750 ℃下煅烧6 h即可合成出吸收CO₂性能良好的硅酸锂材料，在CO₂气氛下，于700 ℃保持约15 min即可达到吸收平衡，其吸收量约达43%(wt)左右。与文献报道相比，材料的合成条件有所改善，材料吸收CO₂的容量也有较大提高。     

Construction of vicinal quaternary carbon atoms by Ireland ester Claisen rearrangement: total synthesis of (±)-herbertenolide, (±)-herberteneacetal, (±)-herbertene-1,14-diol and (±)-herbertene-1,15-diol

Efficient total syntheses of the herbertane sesquiterpene title compounds have been accomplished employing an Ireland ester Claisen rearrangement and ring-closing metathesis reaction sequence based strategy for the construction of two stereogenic vicinal quaternary carbon atoms on a cyclopentane.     

The Chemistry of Simple Phosphorus-Carbon Compounds

With the aid of selected examples an overview is given of the development trends in phosphoruscarbon chemistry over the past few years. An attempt is made to demonstrate the relationships between various parameters and properties such as constitution, basicity, substitution by functional groups, reaction behavior etc. of the compounds. In the case of basis compounds containing methylphosphorus groups the state of development of industrially interesting processes is also outlined. In addition, the synthesis of a few bifunctional phosphorus-carbon compounds which can be employed as comonomers in the production of polymers is described.     

Carbon film growth on iron substrates by a CVD method

Carbon film coatings have been produced by a hot‐wall chemical vapor deposition (CVD) method under moderate conditions from pyrolysis of a mixture of propane and argon on an Fe(110) substrate at temperatures of 800–900 °C for different deposition times. The effects of temperature and reaction time on the growth of the carbon films were studied. Field‐emission scanning electron microscopy (FESEM), Raman microscopy, Auger electron spectroscopy (AES) and x‐ray diffraction methods have been performed to study the surface morphologies, growth features and microstructures of the carbon film coatings. The FESEM analyses indicated that carbon films on an Fe substrate consisted of flat‐layer and filamentous morphologies. Raman and AES analyses showed that the carbon initially was crystalline but the degree of disorder in the top layer of the carbon film increased with increasing deposition temperature. High‐resolution transmission electron microscopy studies are also in agreement with Raman results. The same trend was observed when the deposition time was increased from 5 to 30 min. Copyright © 2005 John Wiley & Sons, Ltd.