聚变堆高热流部件超汽化换热实验研究

搭建了常压水超汽化实验回路(HVL-Ⅰ),采用平面激光诱导荧光(PLIF)、高速摄影、微距摄影、粒子成像测速(PIV)等先进测量技术,开展聚变堆面对等离子体部件(第一壁、偏滤器)在高热流过冷沸腾工况下强化换热特性实验研究。选择三角形和矩形翅片的铬锆铜超汽化样件,实验工况为常压室温(296K),若丹明B 水溶液流速 0.3～0.5m•s⁻¹ 连续可调,热流密度～5MW•m⁻²。实验结果表明同等工况下,矩形翅片比三角形翅片换热效果显著增强,性能提升约30%～50%。微距摄影显示翅根涡流形态保持时间越短,越有利于小汽泡充分扩散,从而使换热得到强化。     

Photoresponse of the In0.3Ga0.7N metal-insulator-semiconductor photodetectors

In0.3Ga0.7N metal-insulator-semiconductor （MIS） and metal-semiconductor （MS） surface barrier photodetectors have been fabricated. The In0.3Ga0.7N epilayers were grown on sapphire by metalorganic chemical vapour deposition （MOCVD）. The photoresponse and reverse current-voltage characteristics of the In0.3Ga0.7N MIS and MS photodetectors were measured. A best zero bias responsivity of 0.18 A/W at 450 nm is obtained for the In0.3Ga0.7N MIS photodetector with 10 nm Si3N4 insulator layer, which is more than ten times higher than the In0.3Ga0.7N MS photodetector. The reason is attributed to the decrease of the interface states and increase of surface barrier height by the inserted insulator. The influence of the thickness of the Si3N4 insulator layer on the photoresponsivity of the MIS photodetector is also discussed.     

Geometric and electronic structure of positively and negatively poled LiNbO3 (0 0 0 1) surfaces

The effect of ferroelectric poling direction on the structure and electronic properties of the LiNbO₃ (0 0 0 1) surface was characterized. Low energy and reflection high energy electron diffraction indicated that both the positively and negatively poled surfaces were (1 × 1) with no evidence of longer range periodic reconstructions. Low energy ion scattering spectra from both surfaces were dominated by scattering from oxygen atoms. X-ray and ultraviolet photoelectron spectra also showed little difference between the positively and negatively poled surfaces, with the exception of a high binding energy shoulder on the O 1s core level of the negative surface. Exposure of the surfaces to atomic hydrogen caused reduction of the surface Nb rather than an increase in intensity on the high binding energy side of the O 1s peak, indicating that the shoulder on the O 1s peak on the negative surface was not due to surface hydroxyl groups. Temperature programmed desorption measurements indicated that the nearly stoichiometric LiNbO₃ samples were susceptible to loss of Li₂O starting at temperatures as low as 500 K, independent of the poling direction. An adatom/vacancy model is proposed in which oxygen ad-anions accumulate on one side of the crystal while oxygen anion vacancies are created on the opposite surface. This model can explain the apparent oxygen termination of both surfaces and the observed (1 × 1) periodicity of the surfaces, and also effectively screens the thickness dependent electric field associated with the polar orientation of the crystal.     

Understanding the adsorption of 4H-1,2,4-triazole derivatives on mild steel surface in molar hydrochloric acid

This study examines the use of some 4H-triazole derivatives, namely 3,5-diphenyl-4H-1,2,4-triazole (DHT), 3,5-bis(4-pyridyl)-4H-1,2,4-triazole (4-PHT) and 3,5-bis(4-methyltiophenyl)-4H-1,2,4-triazole (4-MTHT) for corrosion and dissolution protection of mild steel in normal hydrochloric acid solution. The inhibiting efficiency of the different additives is evaluated by means of weight loss and electrochemical techniques such as ac impedance measurements and polarisation curves. The experimental results obtained reveal that 4-MTHT is the best effective inhibitor and the inhibition efficiency is found to be in the following order: 4-MTHT > 4-PHT > DHT. The variation in inhibitive efficiency mainly depends on the type and nature of the substituents present in the inhibitor molecule. Polarisation curves show that theses triazoles are mixed-type inhibitors in 1 M HCl. The inhibition efficiency increases with 4H-triazole derivatives concentration and attains the maximum value of 99.6% in the case of 4-MTHT at 5 × 10⁻⁴ M. The results obtained from weight loss electrochemical studies were in reasonable agreement. The adsorption of 4H-triazole derivatives on the steel surface obeys to the Langmuir isotherm model. The thermodynamic data of adsorption and activation are determined and discussed. The fundamental thermodynamic functions were used to glean important information about the 4H-triazoles inhibitory behaviour. Molecular modeling was used to get better insight, about structural and electronic effects in relation to the inhibition efficiencies.     

Structure refinements of cadmium substituted lead fluoroapatites by powder X-ray pattern fitting

Solid solutions of cadmium and lead fluoroapatite [Pb_(10−x)Cd_x(PO₄)₆F₂ (0?x?5)] were synthesized by a wet process in a basic medium. Replacement of lead by cadmium induces a linear variation of the crystallographic parameters “a” and “c” according to Végard's law. The cadmium content, as obtained from the refinement, is in agreement with the chemical analysis. The distribution of the lead and cadmium ions between two non-equivalent crystallographic sites, M(1) and M(2), was determined by the Rietveld method. The site-occupancy factors of atoms clearly indicate a preference of cadmium for site M(1) in the apatite structure in agreement with its smaller ionic radii. A progressive shift of the F⁻ ion toward the center of the triangles formed by the site M(2) metals has been observed with increasing cadmium content.     

A study of Ga layers on Si(1 0 0)-(2 × 1) by SR-PES: Influence of adsorbed water

Results for deposition and thermal annealing of gallium on the Si(1 0 0)-(2 × 1) surface achieved by synchrotron radiation photoelectron spectroscopy (SR-PES) and low energy electron diffraction (LEED) are presented. In addition to deposition of Ga on a clean surface, the influence of water adsorption on the arrangement of gallium atoms was also studied. The results on Ga deposition at a higher temperature (490 °C) are consistent with a Ga ad-dimer model showing equivalent bond arrangement of all Ga atoms for coverages up to 0.5 ML. The deposition onto a surface with adsorbed water at room temperature led to a disordered gallium growth. In this case gallium atoms bind to silicon dimers already binding fragments of adsorbed water. A subsequent annealing of these layers leads to a surface structure similar to the Ga-(2 × 2), however, it is less ordered, probably due to the presence of silicon oxides formed from water fragments.     

Surface structure of In/Si(1 1 1) studied by reflection high-energy positron diffraction

We have investigated a quasi-one-dimensional structure of In/Si(1 1 1) surface using reflection high-energy positron diffraction (RHEPD), which is sensitive to the topmost surface structure under the total reflection condition. From the rocking curves, we found that In atoms are located at two different vertical positions, i.e., 0.99 Å and 0.55 Å from the Si zigzag chain in both 4 × 1 (210 K) and 8 × 2 (60 K) phases.     

Structure of Rotating Neutron Stars in Uniform Strong Magnetic Field

Properties and deformations of the rotating neutron stars in uniform strong magnetic field are calculated. The magnetic field will soften the equation of state of the neutron star matters and make an obvious effect on the structure of the rotating neutron star. If the magnetic field is superstrong （B=10^17 T）, the mass, radius, and the deformation will become smaller effectively.