Derivatives of condensed thieno[2,3-d]-pyrimidines. 20. Synthesis of 2-substituted 5,6-dihydro-8H-pyrano[4′,3′:4,5]thieno[2,3-d]pyrimidin-4(3H)-ones and 5,6,7,8-tetrahydrobenzo-[b]thieno[2,3-d]pyrimidin-4-ones

We have developed a method for obtaining 2-substituted 3-amino-6,6-dimethyl-5,6-dihydro-8H-pyrano[4′,3′:4,5]-and 5,6,7,8-tetrahydrobenzo[b]thieno[2,3-d]pyrimidin-4(3H)-ones, converted by deamination to the corresponding dihydropyranothieno-3H-pyrimidinones. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 441–444, March, 2006.     

Solid-phase extraction system for Pb (II) ions enrichment based on multiwall carbon nanotubes coupled on-line to flame atomic absorption spectrometry

The present paper proposes the application of multiwall carbon nanotubes (MWCNTs) as a solid sorbent for lead preconcentration using a flow system coupled to flame atomic absorption spectrometry. The method comprises the preconcentration of Pb (II) ions at a buffered solution (pH 4.7) onto 30 mg of MWCNTs previously oxidized with concentrated HNO₃. The elution step is carried out with 1.0 mol L⁻¹ HNO₃. The effect of the experimental parameters, including sample pH, sampling flow rate, buffer and eluent concentrations were investigated by means of a 2⁴ full factorial design, while for the final optimization a Doehlert design was employed. Under the best experimental conditions the preconcentration system provided detection and quantification limits of 2.6 and 8.6 μg L⁻¹, respectively. A wide linear range varying from 8.6 up to 775 μg L⁻¹ (r > 0.999) and the respective precision (relative standard deviation) of 7.7 and 1.4% for the 15 and 200 μg L⁻¹ levels were obtained. The characteristics obtained for the performance of the flow preconcentration system were a preconcentration factor of 44.2, preconcentration efficiency of 11 min⁻¹, consumptive index of 0.45 mL and sampling frequency estimated as 14 h⁻¹. Preconcentration studies of Pb (II) ions in the presence of the majority foreign ions tested did not show interference, attesting the good performance of MWCNTs. The accuracy of the method was assessed from analysis of water samples (tap, mineral, physiological serum and synthetic seawater) and common medicinal herbs submitted to the acid decomposition (garlic and Ginkgo Biloba). The satisfactory recovery values obtained without using analyte addition method confirms the feasibility of this method for Pb (II) ions determination in different type of samples.     

Chemical properties ofN-(amidomethyl)- andN-(imidomethyl)glycine derivatives

N-Nitroso,N-sulfonyl, andN-acyl derivatives ofN-(amidomethyl)- andN-(imidomethyl)-glycine esters have been synthesized by the reactions of these esters with HNO₂ or with sulfonylating and acylating reagents.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1299–1305, July, 1995.     

On-line preconcentration and determination of nickel in natural water samples by flow injection-inductively coupled plasma optical emission spectrometry (FI-ICP-OES)

An on-line nickel preconcentration and determination system implemented with inductively coupled plasma optical emission spectrometry (ICP-OES) associated to flow injection (FI) was studied. Trace amounts of nickel were preconcentrated by sorption on a conical minicolumn packed with activated carbon (AC) at pH 5.0. The nickel was removed from the minicolumn with 20% nitric acid. An enrichment factor of 80-fold for a sample volume of 50 ml was obtained. The detection limit (DL) value for the preconcentration method proposed was 82 ng l⁻¹. The precision for ten replicate determinations at the 0.5 μg l⁻¹ Ni level was 3.0% relative standard deviation (R.S.D.), calculated from the peak heights obtained. The calibration graph preconcentration method for nickel was linear with a correlation coefficient of 0.9997 at levels near the detection limits (DL) up to at least 100 μg l⁻¹. The method was successfully applied to the determination of nickel in natural water samples.     

Synthesis of 4-amino-5-(4,6-diphenyl-2-pyrimidinyl)-3,4-dihydro-2H-1,2,4-triazole-3-thione and its reactions with C-electrophiles

4-Amino-5-(4,6-diphenyl-2-pyrimidinyl)-3,4-dihydro-2H-1,2,4-trazole-3-thione is formed from the reaction of 4,6-diphenylpyrimidinecarboxylic acid or its ethyl ester with thiocarbonyl hydrazide. Alkylation of the product leads to S-alkyl derivaties or 6-substituted 3-(4,6-diphenyl-2-pyriimidinyl)-7H-1,2,4-triazolo[3,4-b]-1,3,4-thiadiazine. Acetylation of 4-amino-5-(4,6-diphenyl-2-pyrimidinyl)-3,4-dihydro-2H-1,2,4-triazole-3-thione gave under different conditions monoacetyl-, diacetyl, and triacetyl derivatives at the amino group and the N₍₂₎ atom, whereas benzoylation gave a benzoyl group at the amino group and 3-(4,6-diphenyl-2-pyrimidinyl)-6-phenyl-1,2,4-triazolo[3,4-b]-1,3,4-thiadiazole. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, 1088–1094, July, 2007.     

On-line solvent evaporator for coupled LC systems

The mobile phase of a fraction eluted from a first LC column is removed by an on-line evaporator in order to reconcentrate the solute material or to exchange the eluent before performing a subsequent LC separation. Evaporation essentially occurs by concurrent evaporation, i.e. the solvent evaporates at a rate equal to the flow rate of the incoming eluent, and is driven by the overflow principle, i.e. vapors leave the tube as a result of the expansion resulting from evaporation. The liquid is introduced into a small tube (e.g., 4 cm × 1.3 mm i.d.) which is packed, e.g., with a coarse silica gel. The outlet of the evaporator is connected to vacuum in order to enable evaporation at reduced temperature and to increase retention of the volatile components. With normal phase eluents, evaporation rates may approach 1 ml/min; n-dodecane was the most volatile n-alkane fully retained by the evaporator.     

Theoretical insights into the mechanism of acetylcholinesterase-catalyzed acylation of acetylcholine

Acylation of acetylcholine (ACh) catalyzed by acetylcholinesterase (AChE) has been studied using high-level theoretical calculations on a model system that mimics the reaction center of the enzyme, and compared with uncatalyzed acylation reaction. The geometries of all the intermediates and transition states, activation energies, and solvent effects have been calculated. The calculations predict simultaneous formation of two short-strong hydrogen bonds (SSHB) in the rate-determining transition state structures [the first SSHB involves the hydrogen atom of Ser-200 (H(s)) and another involves the hydrogen atom of His-440 (H(h))]. In the intermediate states, the H-bond corresponding to H(h) involves SSHB, whereas the one corresponding to H(s) does not.     

Catalytic C−H/C−F Coupling of Azoles and Acyl Fluorides

A method for the palladium/copper-catalyzed direct acylation of azoles with acyl fluorides is described. This study reports the first examples of acyl fluorides being used as acylation reagents in transition-metal-catalyzed aromatic C−H bond functionalization reactions. Depending on the reaction temperature, decarbonylative coupling may also occur. Mechanistic studies suggest that the cleavage of the aromatic C−H bond, promoted by a copper-phosphine species, is not the rate-limiting step of this acylation.     

Generation of Mixed Anhydrides via Oxidative Fragmentation of Tertiary Cyclopropanols with Phenyliodine(III) Dicarboxylates

Oxidative fragmentation of tertiary cyclopropanols with phenyliodine(III) dicarboxylates in aprotic solvents (dichloromethane, chloroform, toluene) produces mixed anhydrides. The fragmentation reaction is especially facile with phenyliodine(III) reagents bearing electron-withdrawing carboxylate ligands (trifluoroacetyl, 2,4,6-trichlorobenzoyl, 3-nitrobenzoyl), and affords 95−98% yields of the corresponding mixed anhydride products. The latter can be straightforwardly applied for the acylation of various nitrogen, oxygen and sulfur-centered nucleophiles (primary and secondary amines, hydroxylamines, primary alcohols, phenols, thiols). Intramolecular acylation yielding macrocyclic lactones can also be performed. The developed transformation has bolstered the synthetic utility of cyclopropanols as pluripotent intermediates in diversity-oriented synthesis of bioactive natural products and their synthetic congeners. For example, it was successfully applied for the last-stage modification of a cyclic peptide to produce a precursor of a known histone deacetylase inhibitor.     

The ABC of Insulin: The Organic Chemistry of a Small Protein

Insulin is a small protein crucial for regulating the blood glucose level in all animals. Since 1922 it has been used for the treatment of patients with diabetes. Despite consisting of just 51 amino acids, insulin contains 17 of the proteinogenic amino acids, A- and B-chains, three disulfide bridges, and it folds with 3 α-helices and a short β-sheet segment. Insulin associates into dimers and further into hexamers with stabilization by Zn²⁺ and phenolic ligands. Selective chemical modification of proteins is at the forefront of developments in chemical biology and biopharmaceuticals. Insulin's structure has made it amenable to organic and inorganic chemical reactions. This Review provides a synthetic organic chemistry perspective on this small protein. It gives an overview of key chemical and physico-chemical aspects of the insulin molecule, with a focus on chemoselective reactions. This includes N-acylations at the N-termini or at Lys^B29 by pH control, introduction of protecting groups on insulin, binding of metal ions, ligands to control the nano-scale assembly of insulin, and more.