Topical Problems in Elemental Analysis of Advanced Ceramic Materials

Selected prominent problems in the analysis of advanced ceramic materials are surveyed. The importance of reliability of results is discussed in the field of elemental trace- and microanalysis in view of its interaction with economy, power of detection, local resolution and speciation selectivity. Particular problems in the analysis of major constituents, trace components and microlocal distributions are based on the striking propertics of ceramics; they are exemplified. Analytical assistance must start from the beginning of the production processing, in the preparation of the powdered base materials. Determination of the stoichiometry requires high accuracy and differentiation of chemical species in bulk and surface analysis of ceramic base powders. Element trace determination by direct instrumental methods requires standard reference materials for calibration; these are currently inavailable in a sufficient variety. For optimum reliability and power of detection, element traces must be prepared in isolated form in a small excitation volume for analysis. A review on the state-of-the-art of wet-chemical combined procedures is presented. Decomposition position procedures are emphasized, due to their risk of contributing severe systematic error. Combustion in elementary fluorine is presented for decomposition of refractory materials. The performance of some direct procedures is discussed. Very efficient methods are available for element trace determinations in ceramic materials, offering high detection power. Several approaches for high-resolution local microanalysis in non-conductive ceramic materials are identified as the most promising development in the analysis of sintered compact ceramic products and devices.     

Measurement of lactate in whole human blood with near-infrared transmission spectroscopy

We have evaluated the potential of near-infrared spectroscopy (NIRS) as a technique for rapid analysis of lactate in whole blood. To test the NIRS technique, a comparison was made with a standard clinical method using whole blood samples taken from five exercising human subjects at three different stage of exercise. To expand lactate concentration within the physiological range, standard additions method was used to generate 45 unique data points. Spectra were collected over the 2050-2400 nm spectral range with a 1 mm optical path length quartz cell. Reference lactate concentrations in the samples were determined by enzymatic measurements. Estimates and calibration of the lactate concentration with NIRS was made using partial least squares (PLS) regression analysis and leave-N-out cross validation on second derivative spectra. Separate calibrations were determined from each of the subject samples and cumulative PRESS was used to determine the number of PLS factors in the final model. The results from the PLS model presented are generated from the five individual calibration coefficient vectors and provided a correlation coefficient of 0.978 and a standard error of cross validation of 0.65 mmol l⁻¹ between the enzymatic assay and the NIRS technique. To study the parameters that impact the spectra baseline and the correlation between the calculated model and the data, referenced measurements of lactate against baseline spectrum were made for each individual. A correlation coefficient of 0.992 and a standard error of cross validation of 0.21 mmol l⁻¹ were found. The results suggest that NIRS may provide a valuable tool to assess physiological status for both research and clinical needs.     

Preparation of VPS and PVD coatings for metallographic and TEM investigations

The aim of the first part of the paper is to give some advice for the faultless metallographic preparation of vacuum plasma sprayed coatings. Several coating/substrate combinations using metals, alloys and ceramics were investigated to derive some general rules. The second part deals with a preparation technique for cross-sections- of physical vapour deposition coatings. This technique was optimized for TiN and Ti(C, N) coatings on hardmetals which were examined in an analytical transmission electron microscope.     

2,3-Dihydroxypyridine Loaded Amberlite XAD-2 (AXAD-2-DHP): Preparation, Sorption–Desorption Equilibria with Metal Ions, and Applications in Quantitative Metal Ion Enrichment from Water, Milk and Vitamin Samples

2,3-Dihydroxypyridine loaded (via –N=N–linker) Amberlite XAD-2 (AXAD-2-DHP) was prepared and characterized by elemental analyses, TGA and FT-IR spectra. It (1g packed in a column of 1cm diameter; surface area 135.5m²g^–1) was found to be an effective solid phase sorbent for enriching Zn²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Co²⁺ at pH 3.5 to 7.0 using flow rates between 1.0–5.0mLmin^–1. For desorption (recovery 97.0–99.8%) of the metal ions, 8 to 10mL of 2.0molL^–1 HCl or 1.5molL^–1 HNO₃ at a flow rate of between 2.0 and 4.0mLmin^–1 were found most suitable. The t_1/2 (time for 50% sorption) is between 2 and 10min when a 50mL solution (containing a total amount of metal of 2mg) was equilibrated with 0.5g of resin. Sorption of all metal ions except Pb²⁺ follows the Langmuir model, whereas for Pb the data fits with the Freundlich model. The sorption capacity is between 60.7 (for Cd) and 406.7 (for Cu) µmolg^–1. The resin can withstand an acid concentration of 6molL^–1 and can be reused for thirty cycles of sorption–desorption. The preconcentration factor varies between 100 and 300. For Cd, Ni and Cu the sorption capacity of 2,3-dihydroxypyridine loaded cellulose is lower than that of the present resin. The tolerance limits of electrolytes, humic acid, complexing agents, Ca²⁺ and Mg²⁺ in the enrichment of all metal ions are reported. The limits of detection are 3.88, 5.37, 8.72, 13.88, 4.71, 1.24, 0.59 and 0.30µgL^–1 for Zn²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Co²⁺, respectively. The calibration curves for flame AAS determination were linear in the ranges 0.018–1.0, 0.067–5.0, 0.2–5.0, 0.9–20, 0.028–2.0, 0.077–5.0, 0.19–10 and 0.1–3.5µgmL^–1, respectively. All the eight metal ions in river and synthetic water samples, Co in vitamin tablets and Zn in milk samples have been quantitatively enriched with Amberlite XAD-2-DHP and determined by flame atomic absorption spectrometry.     

Ammonium tetraphenylborate-naphthalene adsorbent for the preconcentration and trace determination of uranium in standard alloys and synthetic samples using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol by fourth-derivative spectrophotometry

A solid ion-pair material produced from ammonium tetraphenylborate (ATPB) and naphthalene has been used for the preconcentration of uranium from the large volume of its aqueous complex samples. Uranium reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) to form a water insoluble, coloured complex. This complex is quantitatively retained on the ATPB-naphthalene adsorbent filled in a column in the pH range 7.0–9.5 and at a flow rate of 2 ml/min. The solid mass from the column is dissolved with 5 ml of dimethylformamide (DMF) and uranium is determined by fourth-derivative spectrophotometry. The calibration curve is linear over the concentration range of 0.13–15.0 g of uranium in 5 ml of the final DMF solution. Seven replicate determinations of 6 g of uranium gave a mean peak height (peak-to-peak signal between 592 nm and 582 nm) of 1.02 with a relative standard deviation of 0.95%. The sensitivity is 0.8419 (d⁴A/d⁴)/(g ml^–1) found from the slope of the calibration curve. The interference of a large number of anions and cations on the estimation of uranium has been studied and the method applied for the determination of uranium in coal fly ash, Zr-base alloy and some synthetic samples corresponding to standard alloys.     

Analysis of volatile compounds of rosemary honey. Comparison of different extraction techniques

Summary The analysis of the volatile fraction from honey requires the sugar matrix to be separated prior to the analysis by GC-MS. In this study, three extraction techniques, simultaneous extraction-distillation, liquid-liquid extraction and solid-phase extraction, were compared to the extraction of the volatile compounds of a rosemary honey. Analysis of these fractions by gas chromatography—mass spectrometry enabled the tentative identification of up to 122 volatile compounds (alcohols, ketones, aldehydes, acids, esters, terpenes, hydrocarbons, phenol, furan and pyran compounds). SDE extracts were rich in terpenes and esters, while the other two techniques avoided the formation of artefacts due to heating the sample.     

Column preconcentration of gold by adsorbing AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> onto methyltrioctyl ammonium chloride–naphthalene and subsequent atomic absorption spectrometric determination

A sensitive, selective and simple preconcentration method for ultra-trace gold determination has been developed that uses naphthalene–methyltrioctyl ammonium chloride (Aliquat 336s) as an adsorbent. Gold, in the form of AuCl₄^–, was retained by the adsorbent in the column at a flow rate of 1 ml min^–1. After filtration, the solid mass consisting of the gold complex and naphthalene was dissolved out of the column with 5 ml of N,N-dimethylformamide (DMF), and the metal was then determined by atomic absorption spectrometry. In the initial solution, the calibration graph of absorbance versus gold concentration was found to be linear in the range 0.5–150 ng ml^–1 Au(III) with r=0.997 (n =9), and the 3 s detection limit was 0.428 ng ml^–1. The relative standard deviation for eight replicate measurements of 20 g of gold was 2.14%. Preconcentration factors of 390 and 650 were achieved using 5 ml and 3 ml of DMF, respectively. The proposed method was successfully applied to the determination of gold in wastewater, processed pool water, slurry pool water, and raw well-water from the Moteh gold mine, and synthetic samples.     

Solid-phase extraction system for Pb (II) ions enrichment based on multiwall carbon nanotubes coupled on-line to flame atomic absorption spectrometry

The present paper proposes the application of multiwall carbon nanotubes (MWCNTs) as a solid sorbent for lead preconcentration using a flow system coupled to flame atomic absorption spectrometry. The method comprises the preconcentration of Pb (II) ions at a buffered solution (pH 4.7) onto 30 mg of MWCNTs previously oxidized with concentrated HNO₃. The elution step is carried out with 1.0 mol L⁻¹ HNO₃. The effect of the experimental parameters, including sample pH, sampling flow rate, buffer and eluent concentrations were investigated by means of a 2⁴ full factorial design, while for the final optimization a Doehlert design was employed. Under the best experimental conditions the preconcentration system provided detection and quantification limits of 2.6 and 8.6 μg L⁻¹, respectively. A wide linear range varying from 8.6 up to 775 μg L⁻¹ (r > 0.999) and the respective precision (relative standard deviation) of 7.7 and 1.4% for the 15 and 200 μg L⁻¹ levels were obtained. The characteristics obtained for the performance of the flow preconcentration system were a preconcentration factor of 44.2, preconcentration efficiency of 11 min⁻¹, consumptive index of 0.45 mL and sampling frequency estimated as 14 h⁻¹. Preconcentration studies of Pb (II) ions in the presence of the majority foreign ions tested did not show interference, attesting the good performance of MWCNTs. The accuracy of the method was assessed from analysis of water samples (tap, mineral, physiological serum and synthetic seawater) and common medicinal herbs submitted to the acid decomposition (garlic and Ginkgo Biloba). The satisfactory recovery values obtained without using analyte addition method confirms the feasibility of this method for Pb (II) ions determination in different type of samples.     

Microanalysis of Volatile Organic Compounds (VOCs) in Water Samples – Methods and Instruments

Volatile organic compounds (VOCs), due to their toxicity and persistence in the environment, are particularly important pollutants. Some of these compounds are mutagens, teratogens or carcinogens, while others are responsible for the degradation of organoleptic parameters such as taste and odour of water. This review focuses on a number of key procedural steps in the analysis of volatile organic compounds (VOCs) in water samples. A wide spectrum of techniques for the isolation and preconcentration of the aforementioned pollutants for trace organic analysis by gas chromatography are presented and discussed. The advantages and disadvantages of these techniques are discussed and novel developments are also taken into consideration.